IEC 60958-1:2004

Digital audio interface - Part 1: General

IEC 60958-1:2004 describes a serial, uni-directional, self-clocking interface for the interconnection of digital audio equipment for consumer and professional applications. It specifies the basic structure of the interface. Separate documents define items specific to particular applications. The interface is primarily intended to carry monophonic or stereophonic programmes, encoded using linear PCM and with a resolution of up to 24 bits per sample. This second edition of IEC 60958-1 cancels and replaces the first edition published in 1999 and constitutes a technical revision. The major changes are:
- Annex B has been added to explain the definition given in 5.3 with relation of the families of the IEC 60958 series.
- Clause 5.3 is also added to this description.
- Annex C has been added to explain the relationship of the IEC 60958 series families.
- Annex D has been added as an explanation for a data transmission other than linear PCM.
- Subclause 5.4 has been added to define category code appliance. This bilingual version (2013-07) corresponds to the monolingual English version, published in 2004-03.

Interface audionumérique - Partie 1: Généralités

La CEI 60958-1:2004 décrit une interface série, unidirectionnelle, autosynchronisante, pour l'interconnexion des appareils audionumériques grand public et professionnels. Elle spécifie la structure de base de l'interface. Des documents séparés définissent les points spécifiques pour des applications particulières. L'interface est principalement destinée à acheminer des programmes monophoniques ou stéréophoniques, codés en utilisant un codage MIC linéaire et avec une résolution allant jusqu'à 24 bits par échantillon. Cette deuxième édition de la CEI 60958-1 annule et remplace la première édition publiée en 1999 et constitue une révision technique. Les changements significatifs sont:
- Une Annexe B a été ajoutée pour expliquer la définition donnée en 5.3 en relation avec les familles de la série CEI 60958.
- Un paragraphe 5.3 a également été ajouté à cette description.
- Une Annexe C a été ajoutée pour expliquer la relation entre les familles de la série CEI 60958.
- Une Annexe D a été ajoutée à titre d'explication d'une transmission de données différente du codage MIC linéaire.
- Un paragraphe 5.4 a été ajouté pour définir un code de catégorie d'appareil. La présente version bilingue (2013-07) correspond à la version anglaise monolingue publiée en 2004-03.

General Information

• Status: Published
• Publication Date: 07-Mar-2004
• ICS: 33.160.01 - Audio, video and audiovisual systems in general
• Technical Committee: TC 100 - Audio, video and multimedia systems and equipment
• Current Stage: DELPUB - Deleted Publication
• Completion Date: 19-Sep-2008

Relations

• Revises: IEC 60958-1:1999 - Digital audio interface - Part 1: General
• Effective Date: 05-Sep-2023
• Revised: IEC 60958-1:2008 - Digital audio interface - Part 1: General
• Effective Date: 05-Sep-2023

Standards Content (Sample)

IEC 60958-1
Edition 2.0 2004-03
INTERNATIONAL
STANDARD
Digital audio interface –
Part 1: General
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form

or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,

please contact the address below or your local IEC member National Committee for further information.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: [e-mail]
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: [e-mail]
Tel.: [phone]
Fax: [phone]
IEC 60958-1
Edition 2.0 2004-03
INTERNATIONAL
STANDARD
Digital audio interface –
Part 1: General
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
R
ICS 33.160.01 ISBN 2-8318-7427-0

– 2 – 60958-1  IEC:2004(E)
CONTENTS
FOREWORD.3

1 Scope.5

2 Normative references.5

3 Terms and definitions .5

4 Interface format.7

4.1 Structure of format.7

4.2 Channel coding.8
4.3 Preambles.9
4.4 Validity bit.10
5 Channel status.10
5.1 General.10
5.2 Applications.10
5.3 General assignment of the first and second channel status bits .11
5.4 Category code.11
6 User data.13
6.1 General.13
6.2 Applications.13
7 Electrical requirements.13

Annex A (informative) The use of the validity bit .14
Annex B (informative) Application documents and specifications.15
Annex C (informative) A relationship of IEC 60958 families.16
Annex D (informative) Transmission of CD data other than linear PCM audio.17

Bibliography .18

Table 1 – Preamble coding.9
Table 2 – Channel status data format .12
Table B.1 – Application documents and specifications .15

60958-1  IEC:2004(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION

____________
DIGITAL AUDIO INTERFACE –
Part 1: General
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
IEC 60958-1, edition 2 has been prepared by Technical Area 4, Digital system interfaces, of

IEC technical committee 100: Audio, video and multimedia systems and equipment.
This second edition of IEC 60958-1 cancels and replaces the first edition published in 1999 and
constitutes a technical revision.
All changes introduced in this second edition of IEC 60958-1 intend to clarify the structure and
the relationship between all of IEC 60958 series families.
A brief list of changes include:
• Annex B has been added to explain the definition given in 5.3 with relation of the families of
the IEC 60958 series. Clause 5.3 is also added to this description.
• Annex C has been added to explain the relationship of the IEC 60958 series families.
• Annex D has been added as an explanation for a data transmission other than linear PCM.
• Subclause 5.4 has been added to define category code appliance.
• A Bibliography has been added.

– 4 – 60958-1  IEC:2004(E)
The text of this standard is based on the following documents:

CDV Report on voting
100/552/CDV 100/755/RVC
Full information on the voting for the approval of this standard can be found in the report on

voting indicated in the above table.

This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.

IEC 60958 consists of the following parts under the general title Digital audio interface:
Part 1: General
Part 3: Consumer applications
Part 4: Professional applications
The committee has decided that the contents of this publication will remain unchanged until
2006. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.
A bilingual version of this standard may be issued at a later date.

60958-1  IEC:2004(E) – 5 –
DIGITAL AUDIO INTERFACE –
Part 1: General
1 Scope
This part of IEC 60958 describes a serial, uni-directional, self-clocking interface for the

interconnection of digital audio equipment for consumer and professional applications.
It specifies the basic structure of the interface. Separate documents define items specific to
particular applications.
The interface is primarily intended to carry monophonic or stereophonic programmes, encoded
using linear PCM and with a resolution of up to 24 bits per sample.
When used for other purposes, the interface is able to carry audio data coded other than as
linear PCM coded audio samples. Provision is also made to allow the interface to carry data
related to computer software or signals coded using non-linear PCM. The format specification
for these applications is not part of this standard.
The interface is intended for operation at audio sampling frequencies of 32 kHz and above.
Auxiliary information is transmitted along with the programme.
2 Normative references
The following referenced documents are indispensable for the application of this document. For
dated references, only the edition cited applies. For undated references, the latest edition of
the referenced document (including any amendments) applies.
IEC 60958-3, Digital audio Interface – Part 3: Consumer applications
IEC 60958-4, Digital audio Interface – Part 4: Professional applications
3 Terms and definitions
For the purpose of all parts of the IEC 60958 series, the following terms and definitions apply.
3.1
sampling frequency
frequency of the samples representing an audio signal
NOTE When more than one signal is transmitted through the same interface, the sampling frequencies are
identical.
3.2
audio sample word
value of a digital audio sample. Representation is linear in 2s complement binary form
NOTE Positive numbers correspond to positive analogue voltages at the input of the Analogue-to-Digital Converter
(ADC).
– 6 – 60958-1  IEC:2004(E)
3.3
auxiliary sample bit
one of the four least significant bits (LSBs) that can be assigned as auxiliary sample bits and

used for auxiliary information when the number of audio sample bits in the main data field is

less than or equal to 20
3.4
validity bit
bit indicating whether the main data field bits in the sub-frame (time slots 4 to 27 or 8 to 27,

depending on the audio word length as described in 4.1.1) are reliable or not

3.5
channel status
carrier, in a fixed format, of information associated with each main data field channel which is
decodable by any interface user
NOTE Examples of information to be carried in the channel status are: length of audio sample words, pre-
emphasis, sampling frequency, time codes, alphanumeric source and destination codes.
3.6
user data
data channel provided to carry any other information
3.7
parity bit
bit provided to permit the detection of an odd number of errors resulting from malfunctions in
the interface
3.8
preamble
specific patterns used for synchronization
NOTE There are three different preambles (see 4.3).
3.9
sub-frame
fixed structure used to carry information (see 4.1.1 and 4.1.2)
3.10
frame
sequence of two successive and associated sub-frames
3.11
block
group of 192 consecutive frames
NOTE The start of a block is designated by a special sub-frame preamble (see 4.3).
3.12
channel coding
coding method by which the binary digits are represented for transmission through the int
...

IEC 60958-1 ®
Edition 2.0 2004-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Digital audio interface –
Part 1: General
Interface audionumérique –
Partie 1: Généralités
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les
microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office Tel.: [phone]
3, rue de Varembé Fax: [phone]
CH-1211 Geneva 20 [e-mail]
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

Useful links:
IEC publications search - www.iec.ch/searchpub Electropedia - www.electropedia.org
The advanced search enables you to find IEC publications The world's leading online dictionary of electronic and
by a variety of criteria (reference number, text, technical electrical terms containing more than 30 000 terms and
committee,…). definitions in English and French, with equivalent terms in
It also gives information on projects, replaced and additional languages. Also known as the International
withdrawn publications. Electrotechnical Vocabulary (IEV) on-line.

IEC Just Published - webstore.iec.ch/justpublished Customer Service Centre - webstore.iec.ch/csc
Stay up to date on all new IEC publications. Just Published If you wish to give us your feedback on this publication
details all new publications released. Available on-line and or need further assistance, please contact the
also once a month by email. Customer Service Centre: [e-mail].

A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.

Liens utiles:
Recherche de publications CEI - www.iec.ch/searchpub Electropedia - www.electropedia.org
La recherche avancée vous permet de trouver des Le premier dictionnaire en ligne au monde de termes
publications CEI en utilisant différents critères (numéro de électroniques et électriques. Il contient plus de 30 000
référence, texte, comité d’études,…). termes et définitions en anglais et en français, ainsi que
Elle donne aussi des informations sur les projets et les les termes équivalents dans les langues additionnelles.
publications remplacées ou retirées. Egalement appelé Vocabulaire Electrotechnique
International (VEI) en ligne.
Just Published CEI - webstore.iec.ch/justpublished
Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications de la CEI.
Just Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur
Disponible en ligne et aussi une fois par mois par email. cette publication ou si vous avez des questions
contactez-nous: [e-mail].
IEC 60958-1 ®
Edition 2.0 2004-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Digital audio interface –
Part 1: General
Interface audionumérique –
Partie 1: Généralités
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX R
ICS 33.160.01 ISBN 978-2-8322-0892-2

– 2 – 60958-1  IEC:2004
CONTENTS
FOREWORD . 3

1 Scope . 5
2 Normative references. 5
3 Terms and definitions . 5
4 Interface format . 7
4.1 Structure of format . 7
4.2 Channel coding . 8
4.3 Preambles . 9
4.4 Validity bit . 10
5 Channel status . 10
5.1 General . 10
5.2 Applications . 10
5.3 General assignment of the first and second channel status bits . 11
5.4 Category code . 11
6 User data . 13
6.1 General . 13
6.2 Applications . 13
7 Electrical requirements . 13

Annex A (informative) The use of the validity bit . 14
Annex B (informative) Application documents and specifications . 15
Annex C (informative) A relationship of IEC 60958 families . 16
Annex D (informative) Transmission of CD data other than linear PCM audio . 17

Bibliography . 18

Table 1 – Preamble coding . 9
Table 2 – Channel status data format . 12
Table B1 – Application documents and specifications . 15

60958-1  IEC:2004 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
DIGITAL AUDIO INTERFACE –
Part 1: General
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
IEC 60958-1, edition 2 has been prepared by Technical Area 4, Digital system interfaces, of
IEC technical committee 100: Audio, video and multimedia systems and equipment.
This second edition of IEC 60958-1 cancels and replaces the first edition published in 1999 and
constitutes a technical revision.
All changes introduced in this second edition of IEC 60958-1 intend to clarify the structure and
the relationship between all of IEC 60958 series families.
A brief list of changes include:
• Annex B has been added to explain the definition given in 5.3 with relation of the families of
the IEC 60958 series. Clause 5.3 is also added to this description.
• Annex C has been added to explain the relationship of the IEC 60958 series families.
• Annex D has been added as an explanation for a data transmission other than linear PCM.
• Subclause 5.4 has been added to define category code appliance.
• A Bibliography has been added.

– 4 – 60958-1  IEC:2004
This bilingual version (2013-07) corresponds to the monolingual English version, published in
2004-03.
The text of this standard is based on the following documents:
CDV Report on voting
100/552/CDV 100/755/RVC
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
The French version of this standard has not been voted upon.This publication has been drafted
in accordance with the ISO/IEC Directives, Part 2.
IEC 60958 consists of the following parts under the general title Digital audio interface:
Part 1: General
Part 3: Consumer applications
Part 4: Professional applications
The committee has decided that the contents of this publication will remain unchanged until
2006. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.
60958-1  IEC:2004 – 5 –
DIGITAL AUDIO INTERFACE –
Part 1: General
1 Scope
This part of IEC 60958 describes a serial, uni-directional, self-clocking interface for the
interconnection of digital audio equipment for consumer and professional applications.
It specifies the basic structure of the interface. Separate documents define items specific to
particular applications.
The interface is primarily intended to carry monophonic or stereophonic programmes, encoded
using linear PCM and with a resolution of up to 24 bits per sample.
When used for other purposes, the interface is able to carry audio data coded other than as
linear PCM coded audio samples. Provision is also made to allow the interface to carry data
related to computer software or signals coded using non-linear PCM. The format specification
for these applications is not part of this standard.
The interface is
...