IEC 61310-1:1995
(Main)Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, auditory and tactile signals
Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, auditory and tactile signals
Specifies requirements for visual auditory and tactile methods of indicating safety related information. Specifies a system of colours, safety signs, markings and other warnings, intended for use for the indication of hazardous situations.
Sécurité des machines - Indication, marquage et manoeuvre - Partie 1: Spécifications pour les signaux visuels, auditifs et tactiles
Spécifie des exigences concernant des méthodes visuelles, auditives et tactiles pour transmettre l'information relative à la sécurité. Définit des règles générales pour un système de couleurs, de signaux de sécurité, de marquages et autres avertissements, destinées à être utilisées pour indiquer des situations dangereuses.
General Information
Relations
Standards Content (Sample)
IEC Publication 1310-1
Publication 1310-1 de la CEI
(First edition - 1995)
(Première édition - 1995)
Sécurité des machines - Safety of machinery -
Indication, marking and actuation -
Indication, marquage et manoeuvre -
Partie 1: Spécifications pour Part 1: Requirements for visual,
auditory and tactile signals
les signaux visuels,
auditifs et tactiles
C O R R I G E N D U M 1
...
This May Also Interest You
- Standard21 pagesEnglish and French languagesale 15% off
IEC 62061:2021 specifies requirements and makes recommendations for the design, integration and validation of safety-related control systems (SCS) for machines. It is applicable to control systems used, either singly or in combination, to carry out safety functions on machines that are not portable by hand while working, including a group of machines working together in a coordinated manner.
This document is a machinery sector specific standard within the framework of IEC 61508 (all parts).
The design of complex programmable electronic subsystems or subsystem elements is not within the scope of this document.
The main body of this sector standard specifies general requirements for the design, and verification of a safety-related control system intended to be used in high/continuous demand mode.
This document:
– is concerned only with functional safety requirements intended to reduce the risk of hazardous situations;
– is restricted to risks arising directly from the hazards of the machine itself or from a group of machines working together in a coordinated manner;
This document does not cover
– electrical hazards arising from the electrical control equipment itself (e.g. electric shock - see IEC 60204-1);
– other safety requirements necessary at the machine level such as safeguarding;
– specific measures for security aspects – see IEC TR 63074.
This document is not intended to limit or inhibit technological advancement.
IEC 62061:2021 cancels and replaces the first edition, published in 2005, Amendment 1:2012 and Amendment 2:2015. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
– structure has been changed and contents have been updated to reflect the design process of the safety function,
– standard extended to non-electrical technologies,
– definitions updated to be aligned with IEC 61508-4,
– functional safety plan introduced and configuration management updated (Clause 4),
– requirements on parametrization expanded (Clause 6),
– reference to requirements on security added (Subclause 6.8),
– requirements on periodic testing added (Subclause 6.9),
– various improvements and clarification on architectures and reliability calculations (Clause 6 and Clause 7),
– shift from "SILCL" to "maximum SIL" of a subsystem (Clause 7),
– use cases for software described including requirements (Clause 8),
– requirements on independence for software verification (Clause 8) and validation activities (Clause 9) added,
– new informative annex with examples (Annex G),
– new informative annexes on typical MTTFD values, diagnostics and calculation methods for the architectures (Annex C, Annex D and Annex H).
- Standard289 pagesEnglish languagesale 15% off
- Standard304 pagesEnglish and French languagesale 15% off
- Technical specification1 pageEnglish languagesale 15% off
IEC TS 62998-3:2023 gives guidance on:
- analysis of sensor technologies of different wavelength ranges, measurement methods, and the sensing unit arrangement in an SRS, respectively the arrangement of SRSs in an SRSS;
- representative physical properties of safety-related objects with due consideration of their material characteristics and the sensor technology/technologies used in an SRS/SRSS to achieve the detection capability and comparable results during verification and validation;
- analysis of the interference of objects present in the surrounding on the safety related objects and thereby the influence on the dependability of the detection capability;
- use of algorithms during design, development and maintenance to achieve appropriate detection capability and dependability of detection;
- appropriate use of algorithms during the integration of SRS or SRSS by the integrator to improve execution of measurement information or provide decision information derived from measurement information.
If an SRS/SRSS uses sensor technologies not stated in this document, then the generic approach in accordance with IEC TS 62998-1 applies.
- Technical specification51 pagesEnglish languagesale 15% off
IEC TS 61496-5:2023 provides particular requirements for the design, construction and testing of non-contact electro-sensitive protective equipment (ESPE) designed specifically to provide whole-body detection of a person or persons as part of a safety-related system, employing radar protective devices (RPDs) responsive to diffuse reflection of radar signals for the sensing function using frequency-modulated continuous-wave (FMCW) technique. Special attention is directed to features which ensure that an appropriate safety-related performance is achieved. An ESPE can include optional safety-related functions, the requirements for which are given in Annex A of IEC 61496-1:2020 and Annex A of this document.
The requirements given in this document are related to the detection of adult persons being present in an industrial manufacturing environment.
This document does not specify the dimensions or configurations of the detection zone and its disposition in relation to hazardous parts for any particular application, nor what constitutes a hazardous state of any machine. It is restricted to the functioning of the ESPE and how it interfaces with the machine.
This document does not consider the aspects of a moving RPD application. Additional consideration can be necessary, if the RPD supplier specifies the RPD for use on moving application.
Additional requirements and tests can apply if setup of the RPD differs from Figure 2 and Figure 4.
Where this document does not contain all necessary provisions, IEC TS 62998-1 is used.
For those aspects not considered in this document it is also possible to additionally use provisions from IEC TS 62998-1.
Excluded from this document are RPDs that employ electromagnetic radiation outside the range 9 GHz to 81 GHz (identified as subset of band 10 and band 11 in accordance with ITU Radio Regulations). For sensing devices that employ electromagnetic radiation outside this range, this document can be used as a guide. National regulations can limit the available frequencies.
This document can be relevant to applications other than those for the protection of persons, for example for the protection of machinery or products from mechanical damage. In those applications, different requirements can be appropriate, for example when the materials to be recognized by the sensing function have different properties from those of persons.
This document does not deal with requirements for ESPE functions not related to the protection of persons (e.g. using sensing unit data for navigation).
While a data interface can be used to control optional safety-related ESPE functions (Annex A), this document does not provide specific requirements. Requirements for these safety-related functions can be determined by consulting other standards (for example, IEC 61508, IEC 62046, IEC 62061, and ISO 13849-1).
This document does not deal with EMC emission requirements.
The contents of the corrigendum of October 2023 have been included in this copy.
- Technical specification49 pagesEnglish languagesale 15% off
IEC TS 63394:2023 In the context of the safety of machinery, the sector standard IEC 62061, along with ISO 13849 1, provides requirements to manufacturers of machines for the design, development and integration of safety-related control systems (SCS) or safety-related parts of control systems (SRP/CS), depending on technology used (mechanical, pneumatic, hydraulic or electrical technologies) to perform safety function(s). This document does not replace ISO 13849-1 and IEC 62061. This document gives additional guidance to the application of IEC 62061 or ISO 13849-1.
This document:
– gives guidelines and specifies additional requirements for specific safety functions based on the methodology of ISO 12100, which are relevant in machinery and respecting typical boundary conditions of machinery;
– considers safety functions which are designed for high demand mode of operation yet are rarely operated, called rarely activated safety functions;
– gives additional information for the calculation of failure rates using other (non-electronic) technologies based e.g. on Weibull distribution, because all the formula defined in IEC 62061 and ISO 13849-1 are based on exponential distribution.
Therefore, the basis for these guidelines and additional requirements is
– a typical classification of safety functions;
– a consideration of typical architectures used for designing safety functions;
– a consideration of modes of operation of safety functions;
– the derivation and evaluation of PFH formulas for subsystems considering the used technology.
This document does not address low demand mode of operation according to IEC 61508.
This document does not take into account either layer of protection analysis (LOPA) or basic process control system (BPCS), according to IEC 61511 as a risk reduction measure.
This document considers all lifecycle phases of the machine regarding functional safety, and SCS or SRP/CS.
- Technical specification142 pagesEnglish languagesale 15% off
IEC TS 63074:2023 identifies the relevant aspects of the IEC 62443 series related to security threats and vulnerabilities that are considered for the design and implementation of safety-related control systems (SCS) which can lead to the loss of the ability to maintain safe operation of a machine.
Typical security aspects related to the machine with potential relation to SCS are:
– vulnerabilities of the SCS either directly or indirectly through the other parts of the machine which can be exploited by security threats that can result in security attacks (security breach);
– influence on the safety characteristics and ability of the SCS to properly perform its function(s);
– typical use case definition and application of a corresponding threat model.
Non-safety-related aspects of security threats and vulnerabilities are not considered in this document.
The focus of this document is on intentional malicious actions. However, intentional hardware manipulation (e.g. wiring, exchange of components) or foreseeable misuse by physical manipulation of SCS (e.g. physical bypass) is not considered in this document.
This document does not cover security requirements for information technology (IT) products and for the design of devices used in the SCS (e.g., product specific standards can be available, such as IEC TS 63208).
- Technical specification30 pagesEnglish languagesale 15% off
IEC TS 61496-4-3:2022 is available as IEC TS 61496-4-3:2022 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC TS 61496-4-3:2022 specifies requirements for the design, construction and testing of non-contact electro-sensitive protective equipment (ESPE) designed specifically to detect persons or parts of persons as part of a safety-related system, employing vision-based protective devices (VBPDs) using stereo vision techniques (VBPDST) for the sensing function. Special attention is directed to features which ensure that an appropriate safety-related performance is achieved. An ESPE can include optional safety-related functions, the requirements for which are given in Annex A of IEC 61496-1:2020 and this document. Where this document does not contain all necessary provisions, IEC TS 62998-1 applies. It is also possible, for those aspects not considered in this document, to use provisions from IEC TS 62998-1 additionally. This document does not specify the dimensions or configurations of the detection zone and its disposition in relation to hazardous parts for any particular application, nor what constitutes a hazardous state of any machine. It is restricted to the functioning of the ESPE and how it interfaces with the machine. The detection principle is based on the evaluation of images from different viewing points (stereoscopic view) for the determination of distance information. This distance information is used to determine the position of an object(s).
– This document is limited to vision based ESPEs with fixed distances (stereo base) and fixed directions of the optical axes using a fixed focal length.
– It is limited to vision based ESPEs that do not require human intervention for detection.
– It is limited to vision based ESPEs that detect objects entering into or being present in a detection zone(s).
– It is limited to VBPDSTs employing radiation at wavelengths within the range 400 nm to 1 500 nm.
– This document does not address those aspects required for complex classification or differentiation of the object detected.
– This document does not consider the aspects of a moving ESPE installation.
Additional requirements and tests can apply in the following cases:
– Use of multi-spectral (colour) techniques;
– Setups other than as shown in Figure 2 and Figure 3 (e.g. changing backgrounds, horizontal orientation of the optical axis with respect to the floor);
– Intended for outdoor applications.
This document is relevant for VBPDSTs having a stated detection capability up to 200 mm. This document can be relevant to applications other than those for the protection of persons or parts of persons like arm or fingers (in the range 14 mm to 200 mm), for example the protection of machinery or products from mechanical damage. In those applications, additional requirements can be necessary, for example when the materials that are to be recognized by the sensing function have different properties from those of persons. This document does not deal with EMC emission requirements.
IEC TS 61496-4-3:2022 cancels and replaces the first edition published in 2015-05. This edition constitutes a technical revision. This edition includes the following technical changes with respect to the previous edition:
a) Some requirement clauses and test procedures have been adapted or removed because they have been consolidated in IEC 61496-1:2020 (e.g. 5.4.6.2 Light sources or Clause A.9).
- Technical specification61 pagesEnglish languagesale 15% off
- Technical specification127 pagesEnglish languagesale 15% off
IEC TS 61496-4-2:2022 is available as IEC TS 61496-4-2:2022 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC TS 61496-4-2:2022 specifies requirements for the design, construction and testing of non-contact electro-sensitive protective equipment (ESPE) designed specifically to detect persons as part of a safety-related system, employing vision-based protective devices (VBPDs) using reference pattern techniques (VBPDPP) for the sensing function. Special attention is directed to features which ensure that an appropriate safety-related performance is achieved. An ESPE can include optional safety-related functions, the requirements for which are given in Annex A of IEC 61496-1:2020 and this document. Where this document does not contain all necessary provisions, then IEC TS 62998-1 applies. It is also possible, for those aspects not considered in this document, to use provisions from IEC TS 62998-1 additionally. This document does not specify the dimensions or configurations of the detection zone and its disposition in relation to hazardous parts for any particular application, nor what constitutes a hazardous state of any machine. It is restricted to the functioning of the ESPE and how it interfaces with the machine. A VBPDPP is defined as consisting of a single image-sensing device viewing on a passive reference pattern as the background and where the detection principle is based on blocking or partially preventing the view of the pattern. Information about the thickness, shape, surface characteristics or location of the object is not required for detection. For multi-image sensing devices, additional techniques, requirements and test procedures can be necessary.
- This document is limited to automatic vision-based ESPEs that do not require human intervention for detection.
- It is limited to automatic vision-based ESPEs that detect objects entering into, or are present in, a detection zone(s).
- It is limited to ESPEs using active illumination technique.
- Excluded from this technical specification are VBPDPPs employing radiation at wavelengths outside the range 400 nm to 1 500 nm.
- This document does not address those aspects required for complex classification or differentiation of the object detected.
This document is relevant for VBPDPPs having a stated detection capability up to 200 mm. This document does not deal with EMC emission requirements.
IEC TS 61496-4-2:2022 cancels and replaces the first edition published in 2014. This edition constitutes a technical revision. This edition includes the following technical changes with respect to the previous edition:
a) Some requirement clauses and test procedures have been adapted or removed because they have been consolidated in IEC 61496-1:2020 (e.g. 5.4.6.2 of IEC 61496-1:2020 Light sources or Clause A.9).
- Technical specification38 pagesEnglish languagesale 15% off
- Technical specification84 pagesEnglish languagesale 15% off
IEC TR 63161:2022 can be used where a risk assessment according to ISO 12100 has been conducted for a machine or process plant and where a safety related control function has been selected for implementation as a protective measure against specified hazards. This document describes an example basic logical rationale to assign a safety integrity requirement to the selected function.
The description is generic and as far as reasonably possible independent from any specific tool or method that can be used for assignment of a safety integrity requirement. The requirement can be expressed as a safety integrity level (SIL), or performance level (PL).
An example basic rationale is described that is embodied by such methods and tools, as far as they follow a risk based quantitative approach.
Conversely, the logic described in this document can be used as a reference for assessing specific methods or tools for safety integrity assignment. This can clarify how far the respective tool/method is following a risk based quantitative approach, and where deviations from that approach are imposed by other considerations. In real applications, the quantitative risk based approach can be modified or overridden by other considerations in many cases and for good reasons. It is not within the scope of this document to discuss or evaluate such reasons. Usually the reasons for deviations from a given tool or method from a quantitative logic are provided, so that this can be discussed in the proper frame.
Examples for such analyses are provided for common assignment tools in the format of risk graphs and risk matrices.
This document can be used for safety related control functions in all modes of application: continuous mode, high demand mode and low demand mode of application.
- Technical report46 pagesEnglish languagesale 15% off
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.