IEC 60320-3:2014/AMD2:2022

Amendment 2 - Appliance couplers for household and similar general purposes - Part 3: Standard sheets and gauges

Amendement 2 - Connecteurs pour usages domestiques et usages généraux analogues - Partie 3: Feuilles de norme et calibres

General Information

• Status: Published
• Publication Date: 04-Oct-2022
• ICS: 29.120.30 - Plugs, socket-outlets, couplers
• Technical Committee: SC 23G - Appliance couplers
• Drafting Committee: MT 1 - TC 23/SC 23G/MT 1
• Current Stage: PPUB - Publication issued
• Start Date: 04-Nov-2022
• Completion Date: 05-Oct-2022

Relations

• Amends: IEC 60320-3:2014 - Appliance couplers for household and similar general purposes - Part 3: Standard sheets and gauges
• Effective Date: 05-Sep-2023

Standards Content (Sample)

IEC 60320-3
®

Edition 1.0 2022-10
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
A MENDMENT 2
AM ENDEMENT 2

Appliance couplers for household and similar general purposes –
Part 3: Standard sheets and gauges

Connecteurs pour usages domestiques et usages généraux analogues –
Partie 3: Feuilles de norme et calibres

IEC 60320-3:2014-10/AMD2:2022-10(en-fr)

---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2022 IEC, Geneva, Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.


Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et
les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Secretariat Tel.: [phone]
3, rue de Varembé [e-mail]
CH-1211 Geneva 20 www.iec.ch
Switzerland

About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform IEC Products & Services Portal - products.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always have
committee, …). It also gives information on projects, replaced access to up to date content tailored to your needs.
and withdrawn publications.

Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 300 terminological entries in English
details all new publications released. Available online and once
and French, with equivalent terms in 19 additional languages.
a month by email.
Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or need
further assistance, please contact the Customer Service
Centre: [e-mail].


A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Recherche de publications IEC - IEC Products & Services Portal - products.iec.ch
webstore.iec.ch/advsearchform Découvrez notre puissant moteur de recherche et consultez
La recherche avancée permet de trouver des publications IEC gratuitement tous les aperçus des publications. Avec un
en utilisant différents critères (numéro de référence, texte, abonnement, vous aurez toujours accès à un contenu à jour
comité d’études, …). Elle donne aussi des informations sur les adapté à vos besoins.
projets et les publications remplacées ou retirées.

Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
Le premier dictionnaire d'électrotechnologie en ligne au monde,
Restez informé sur les nouvelles publications IEC. Just
avec plus de 22 300 articles terminologiques en anglais et en
Published détaille les nouvelles publications parues.
français, ainsi que les termes équivalents dans 19 langues
Disponible en ligne et une fois par mois par email.
additionnelles. Egalement appelé Vocabulaire

Electrotechnique International (IEV) en ligne.
Service Clients - webstore.iec.ch/csc
Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
[e-mail].

---------------------- Page: 2 ----------------------
IEC 60320-3

®


Edition 1.0 2022-10




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE




A MENDMENT 2

AM ENDEMENT 2





Appliance couplers for household and similar general purposes –

Part 3: Standard sheets and gauges




Connecteurs pour usages domestiques et usages généraux analogues –

Partie 3: Feuilles de norme et calibres
















INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE


INTERNATIONALE




ICS 29.120.30 ISBN 978-2-8322-5774-6




Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 3 ----------------------
– 2 – IEC 60320-3:2014/AMD2:2022
© IEC 2022
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

APPLIANCE COUPLERS FOR HOUSEHOLD
AND SIMILAR GENERAL PURPOSES –

Part 3: Standard sheets and gauges

AMENDMENT 2

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
Amendment 2 to IEC 60320-3:2014 has been prepared by subcommittee 23G: Appliance
couplers, of IEC technical committee 23: Electrical accessories.
The text of this Amendment is based on the following documents:
Draft Report on voting
23G/476/FDIS 23G/478/RVD

Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this Amendment is English.

---------------------- Page: 4 ----------------------
IEC 60320-3:2014/AMD2:2022 – 3 –
© IEC 2022
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
described in greater detail at www.iec.ch/publications/.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under webstore.iec.ch in the data related to the
specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.

___________

4 General requirements
Add the following sentence at the start of the clause:
Table A.1 and Table A.2 of Annex A give an overview of combinations of connectors and
appliance inlets, and combinations of appliance outlets and plug connectors, respectively.
Add, in Table 2, the following rows, as additional new rows 5 to 7 (counting of rows excludes
the column heading row):
60245 IEC 53
or
c
10 I 120 Yes
0,75
60245 IEC 89
M
N
60245 IEC 53
or
c
10 I 155 Yes
0,75
60245 IEC 89
O P
60245 IEC 53
or
60245 IEC 89 c
16 I 155 Yes
1
Q
R

Add the following new standard sheets after the existing standard sheet L:

---------------------- Page: 5 ----------------------
– 4 – IEC 60320-3:2014/AMD2:2022
© IEC 2022
Standard sheet M
Plug connector for 10 A / 250 V for use in class I equipment in hot conditions
The outline 1) of the front part shall not be exceeded or decreased, at any point, within a
distance of 17 mm from the engagement face.
The outline 2) of the rear part shall not be exceeded in any section perpendicular to the axis of
the plug connector, except that, for plug connectors with lateral cord entry and for those
combined with other accessories, this limitation does not apply in the direction of the axis of the
cord or of the actuating member.
The sketches are not intended to govern design except as regards the dimensions shown.
Dimensions in millimetres

NOTE The sketches are not intended to govern design, except as regards the dimensions shown. Dimensions
without tolerances are only recommendations.

---------------------- Page: 6 ----------------------
IEC 60320-3:2014/AMD2:2022 – 5 –
© IEC 2022
Standard sheet N
Appliance outlet 10 A / 250 V for class I equipment in hot conditions
The sketches are not intended to govern design except as regards the dimensions shown.
Dimensions in millimetres

NOTE The sketches are not intended to govern design, except as regards the dimensions shown. Dimensions
without tolerances are only recommendations.

---------------------- Page: 7 ----------------------
– 6 – IEC 60320-3:2014/AMD2:2022
© IEC 2022
Standard sheet O
Plug connector for 10 A / 250 V for use in class I equipment in very hot conditions
The outline 1) of the front part shall not be exceeded or decreased, at any point, within a
distance of 17 mm from the engagement face.
The outline 2) of the rear part shall not be exceeded in any section perpendicular to the axis of
the plug connector, except that, for plug connectors with lateral cord entry and for those
combined with other accessories, this limitation does not apply in the direction of the axis of the
cord or of the actuating member.
The sketches are not intended to govern design except as regards the dimensions shown.
Dimensions in millimetres

NOTE The sketches are not intended to govern design, except as regards the dimensions shown. Dimensions
without tolerances are only recommendations.

---------------------- Page: 8 ----------------------
IEC 60320-3:2014/AMD2:2022 – 7 –
© IEC 2022
Standard sheet P
Appliance outlet 10 A / 250 V for class I equipment in very hot conditions
The sketches are not intended to govern design except as regards the dimensions shown.
Dimensions in millimetres

NOTE The sketches are not intended to govern design, except as regards the dimensions shown. Dimensions
without tolerances are only recommendations.

---------------------- Page: 9 ----------------------
– 8 – IEC 60320-3:2014/AMD2:2022
© IEC 2022
Standard sheet Q
Plug connector for 16 A / 250 V for use in class I equipment in very hot conditions
The outline 1) of the front part shall not be exceeded or decreased, at any point, within a
distance of 19 mm from the engagement face.
The outline 2) of the rear part shall not be exceeded in any section perpendicular to the axis of
the plug connector, except that, for plug connectors with lateral cord entry and for those
combined with other accessories, this limitation does not apply in the direction of the axis of the
cord or of the actuating member.
The sketches are not intended to govern design except as regards the dimensions shown.
Dimensions in millimetres

NOTE The sketches are not intended to govern design, except as regards the dimensions shown. Dimensions
without tolerances are only recommendations.

---------------------- Page: 10 ----------------------
IEC 60320-3:2014/AMD2:2022 – 9 –
© IEC 2022
Standard sheet R
Appliance outlet 16 A / 250 V for class I equipment in very hot conditions
The sketches are not intended to govern design except as regards the dimensions shown.
Dimensions in millimetres

NOTE The sketches are not intended to govern design, except as regards the dimensions shown. Dimensions
without tolerances are only recommendations.

Add the following new Annex A.
Annex A – Compatibility (informative)

---------------------- Page: 11
...