IEC 60191-6-3:2000

Mechanical standardization of semiconductor devices - Part 6-3: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of quad flat packs (QFP)

IEC 60191-6-3:2000 stipulates a method for quad flat packs (QFP) measuring dimensions which are classified into Form E.

Normalisation mécanique des dispositifs à semiconducteurs - Partie 6-3: Règles générales pour la préparation des dessins d'encombrement des dispositifs à semiconducteurs à montage en surface - Méthodes de mesure pour les boîtiers plats quadrangulaires (QFP)

La CEI 60191-6-3:2000 stipule une méthode de mesure des dimensions des boîtiers plats quadrangulaires (QFP) qui sont classés dans la forme E.

General Information

• Status: Published
• Publication Date: 28-Sep-2000
• ICS: 01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
• ICS: 31.080.01 - Semiconductor devices in general
• Technical Committee: SC 47D - Semiconductor devices packaging
• Drafting Committee: WG 2 - TC 47/SC 47D/WG 2
• Current Stage: PPUB - Publication issued
• Start Date: 30-Sep-2000
• Completion Date: 29-Sep-2000

Standards Content (Sample)

INTERNATIONAL IEC
STANDARD
60191-6-3
First edition
2000-09
Mechanical standardization of
semiconductor devices –
Part 6-3:
General rules for the preparation of
outline drawings of surface mounted
semiconductor device packages –
Measuring methods for package dimensions
of quad flat packs (QFP)
Normalisation mécanique des dispositifs à semiconducteurs –
Partie 6-3:
Règles générales pour la préparation des dessins
d’encombrement des dispositifs à semiconducteurs
à montage en surface – Méthodes de mesure pour
les boîtiers plats quadrangulaires (QFP)
Reference number
Numbering
As from 1 January 1997 all IEC publications are issued with a designation in the
60000 series.
Consolidated publications
Consolidated versions of some IEC publications including amendments are
available. For example, edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the
base publication, the base publication incorporating amendment 1 and the base
publication incorporating amendments 1 and 2.
Validity of this publication
The technical content of IEC publications is kept under constant review by the IEC,
thus ensuring that the content reflects current technology.
Information relating to the date of the reconfirmation of the publication is available
in the IEC catalogue.
Information on the subjects under consideration and work in progress undertaken
by the technical committee which has prepared this publication, as well as the list
of publications issued, is to be found at the following IEC sources:
• IEC web site*
• Catalogue of IEC publications
Published yearly with regular updates
(On-line catalogue)*
• IEC Bulletin
Available both at the IEC web site* and as a printed periodical
Terminology, graphical and letter symbols
For general terminology, readers are referred to IEC 60050: International
Electrotechnical Vocabulary (IEV).
For graphical symbols, and letter symbols and signs approved by the IEC for
general use, readers are referred to publications IEC 60027: Letter symbols to be
used in electrical technology, IEC 60417: Graphical symbols for use on equipment.
Index, survey and compilation of the single sheets and IEC 60617: Graphical symbols
for diagrams.
* See web site address on title page.

INTERNATIONAL IEC
STANDARD
60191-6-3
First edition
2000-09
Mechanical standardization of
semiconductor devices –
Part 6-3:
General rules for the preparation of
outline drawings of surface mounted
semiconductor device packages –
Measuring methods for package dimensions
of quad flat packs (QFP)
Normalisation mécanique des dispositifs à semiconducteurs –
Partie 6-3:
Règles générales pour la préparation des dessins
d’encombrement des dispositifs à semiconducteurs
à montage en surface – Méthodes de mesure pour
les boîtiers plats quadrangulaires (QFP)
 IEC 2000  Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: [phone] e-mail: [e-mail] IEC web site http://www.iec.ch
Commission Electrotechnique Internationale
PRICE CODE
Q
International Electrotechnical Commission
For price, see current catalogue

– 2 – 60191-6-3  IEC:2000(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
MECHANICAL STANDARDIZATION OF SEMICONDUCTOR DEVICES –
Part 6-3: General rules for the preparation of outline drawings
of surface mounted semiconductor device packages –
Measuring methods for package dimensions of quad flat packs (QFP)
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International
Organization for Standardization (ISO) in accordance with conditions determined by agreement between the
two organizations.
2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested National Committees.
3) The documents produced have the form of recommendations for international use and are published in the form
of standards, technical specifications, technical reports or guides and they are accepted by the National
Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with one of its standards.
6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject
of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60191-6-3 has been prepared by subcommittee 47D: Mechanical
standardization of semiconductor devices, of IEC technical committee 47: Semiconductor
devices.
The text of this standard is based on the following documents:
FDIS Report on voting
47D/370/FDIS 47D/388/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 3.

60191-6-3  IEC:2000(E) – 3 –
The committee has decided that the contents of this publication will remain unchanged until 2003.
At this date, the publication will be
 reconfirmed;
 withdrawn;
 replaced by a revised edition, or
 amended.
A bilingual version of this publication may be issued at a later date.

– 4 – 60191-6-3  IEC:2000(E)
MECHANICAL STANDARDIZATION OF SEMICONDUCTOR DEVICES –
Part 6-3: General rules for the preparation of outline drawings
of surface mounted semiconductor device packages –
Measuring methods for package dimensions of quad flat packs (QFP)
1 Scope
This part of IEC 60191 stipulates a method for quad flat packs (QFP) measuring dimensions
which are classified into Form E.
2 Normative references
The following normative documents contain provisions which, through reference in this text,
constitute provisions of this part of IEC 60191. For dated references, subsequent
amendments to, or revisions of, any of these publications do not apply. However, parties to
agreements based on this part of IEC 60191 are encouraged to investigate the possibility of
applying the most recent editions of the normative documents indicated below. For undated
references, the latest edition of the normative document referred to applies. Members of IEC
and ISO maintain registers of currently valid International Standards.
IEC 60191-6:1990, Mechanical standardization of semiconductor devices – Part 6: General
rules for the preparation of outline drawings of surface mounted semiconductor device
packages
3 Definitions
For the purpose of this part of IEC 60191, the definitions of IEC 60191-6 apply.
4 Measuring methods
4.1 The measuring methods described in this standard are for dimension values
guaranteed to users on the basis of the following items.
a) In general, measuring the dimensions shall be made with the semiconductor packages
mounted on printed circuit-board as the guarantee is made to user.
b) In general, measurement may be made either by hand or automatically.
c) If a specified dimension is difficult to measure, the best alternative measuring method is
defined as the formal measuring method.
d) The dimensions that cannot be measured unless the package is destroyed may be
calculated from other dimensions or replaced by representative values.

60191-6-3  IEC:2000(E) – 5 –
4.2 Reference characters and drawing
HD
D
D HD
/2 /2
B
A
X4
n
tSAB
1 2
X4
e
f SAB
Z D
b
xSAB
S
y
S
IEC  1671/2000
Figure 1
A
1 A2
A
/2 /2
E HE
E
HE
– 6 – 60191-6-3  IEC:2000(E)
Seating plane
Lp
L1
b
b
IEC  1672/2000
Figure 2
θ
c
A3
c1
c
60191-6-3  IEC:2000(E) – 7 –
4.3 Datum
The datum shall be defined as follows.
B
|90 - β|
= γ
β
A
xSAB
S
IEC  1673/2000
Figure 3
Centres of opposite sides of a pac
...

IEC 60191-6-3 ®
Edition 1.0 2000-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Mechanical standardization of semiconductor devices –
Part 6-3: General rules for the preparation of outline drawings of surface
mounted semiconductor device packages – Measuring methods for package
dimensions of quad flat packs (QFP)

Normalisation mécanique des dispositifs à semiconducteurs –
Partie 6-3: Règles générales pour la préparation des dessins d’encombrement
des dispositifs à semiconducteurs à montage en surface – Méthodes de mesure
pour les boîtiers plats quadrangulaires (QFP)

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les
microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office Tel.: [phone]
3, rue de Varembé Fax: [phone]
CH-1211 Geneva 20 [e-mail]
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

Useful links:
IEC publications search - www.iec.ch/searchpub Electropedia - www.electropedia.org
The advanced search enables you to find IEC publications The world's leading online dictionary of electronic and
by a variety of criteria (reference number, text, technical electrical terms containing more than 30 000 terms and
committee,…). definitions in English and French, with equivalent terms in
It also gives information on projects, replaced and additional languages. Also known as the International
withdrawn publications. Electrotechnical Vocabulary (IEV) on-line.

IEC Just Published - webstore.iec.ch/justpublished Customer Service Centre - webstore.iec.ch/csc
Stay up to date on all new IEC publications. Just Published If you wish to give us your feedback on this publication
details all new publications released. Available on-line and or need further assistance, please contact the
also once a month by email. Customer Service Centre: [e-mail].

A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.

Liens utiles:
Recherche de publications CEI - www.iec.ch/searchpub Electropedia - www.electropedia.org
La recherche avancée vous permet de trouver des Le premier dictionnaire en ligne au monde de termes
publications CEI en utilisant différents critères (numéro de électroniques et électriques. Il contient plus de 30 000
référence, texte, comité d’études,…). termes et définitions en anglais et en français, ainsi que
Elle donne aussi des informations sur les projets et les les termes équivalents dans les langues additionnelles.
publications remplacées ou retirées. Egalement appelé Vocabulaire Electrotechnique
International (VEI) en ligne.
Just Published CEI - webstore.iec.ch/justpublished
Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications de la CEI.
Just Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur
Disponible en ligne et aussi une fois par mois par email. cette publication ou si vous avez des questions
contactez-nous: [e-mail].
IEC 60191-6-3 ®
Edition 1.0 2000-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Mechanical standardization of semiconductor devices –

Part 6-3: General rules for the preparation of outline drawings of surface

mounted semiconductor device packages – Measuring methods for package

dimensions of quad flat packs (QFP)

Normalisation mécanique des dispositifs à semiconducteurs –

Partie 6-3: Règles générales pour la préparation des dessins d’encombrement

des dispositifs à semiconducteurs à montage en surface – Méthodes de mesure

pour les boîtiers plats quadrangulaires (QFP)

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX Q
ICS 31.080.01 ISBN 978-2-83220-591-4

– 2 – 60191-6-3  IEC:2000
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
MECHANICAL STANDARDIZATION OF SEMICONDUCTOR DEVICES –

Part 6-3: General rules for the preparation of outline drawings
of surface mounted semiconductor device packages –
Measuring methods for package dimensions of quad flat packs (QFP)

FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International
Organization for Standardization (ISO) in accordance with conditions determined by agreement between the
two organizations.
2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested National Committees.
3) The documents produced have the form of recommendations for international use and are published in the form
of standards, technical specifications, technical reports or guides and they are accepted by the National
Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with one of its standards.
6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject
of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60191-6-3 has been prepared by subcommittee 47D: Mechanical
standardization of semiconductor devices, of IEC technical committee 47: Semiconductor
devices.
This bilingual version (2013-01) corresponds to the monolingual English version, published in
2000-09.
The text of this standard is based on the following documents:
FDIS Report on voting
47D/370/FDIS 47D/388/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
The French version of this standard has not been voted upon.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 3.

60191-6-3  IEC:2000 – 3 –
The committee has decided that the contents of this publication will remain unchanged until
2003. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.
– 4 – 60191-6-3  IEC:2000
MECHANICAL STANDARDIZATION OF SEMICONDUCTOR DEVICES –

Part 6-3: General rules for the preparation of outline drawings
of surface mounted semiconductor device packages –
Measuring methods for package dimensions of quad flat packs (QFP)

1 Scope
This part of IEC 60191 stipulates a method for quad flat packs (QFP) measuring dimensions
which are classified into Form E.
2 Normative references
The following normative documents contain provisions which, through reference in this text,
constitute provisions of this part of IEC 60191. For dated references, subsequent
amendments to, or revisions of, any of these publications do not apply. However, parties to
agreements based on this part of IEC 60191 are encouraged to investigate the possibility of
applying the most recent editions of the normative documents indicated below. For undated
references, the latest edition of the normative document referred to applies. Members of IEC
and ISO maintain registers of currently valid International Standards.
IEC 60191-6:1990, Mechanical standardization of semiconductor devices – Part 6: General
rules for the preparation of outline drawings of surface mounted semiconductor device
packages
3 Definitions
For the purpose of this part of IEC 60191, the definitions of IEC 60191-6 apply.
4 Measuring methods
4.1 The measuring methods described in this standard are for dimension values
guaranteed to users on the basis of the following items.
a) In general, measuring the dimensions shall be made with the semiconductor packages
mounted on printed circuit-board as the guarantee is made to user.
b) In general, measurement may be made either by hand or automatically.
c) If a specified dimension is difficult to measure, the best alternative measuring method is
defined as the formal measuring method.
d) The dimensions that cannot be measured unless the package is destroyed may be
calculated from other dimensions or replaced by representative values.

60191-6-3  IEC:2000 – 5 –
4.2 Reference characters and drawing
HD
D
D HD
/2 /2
B
A
X4
n
t S AB
1 2
X4
e
S AB
f
Z D
b
x S AB
S
y
S
IEC  1671/2000
Figure 1
A
1 A2
A
/2 /2
HE
E
E
HE
– 6 – 60191-6-3  IEC:2000
Seating plane
Lp
L1
b
b1
IEC  1672/2000
Figure 2
θ
c
A3
c1
c
60191-6-3  IEC:2000 – 7 –
4.3 Datum
The datum shall be defined as follows.
B
|90 - β|
= γ
β
A
x S AB
S
IEC  1673/2000
Figure 3
Centres of opposite sides of a package, which are defined below, shall be connected
together. An angle β subtended by the two crossing lines shall be obtained.
A difference |90° - β| of the angle β from 90° shall be equally distributed to the sides to obtain
rectangular axes. The rectangular axes are depicted as datum lines A and B of the package.
Description of the centres of sides

Even number of leads on a package side Odd number of leads on a package side
IEC  1674/2000 IEC  1675/2000

A centre of facing sides of adjacent leads The centre of leads at a position 0,1 mm
at a position 0,1 mm inside the top of the leads inside the top of the leads
Figure 4
0.1
0,1
0,1
– 8 – 60191-6-3 © IEC:2000
4.4 Overall width HE / overall length HD / Package width D / package length E
4.4.1 Description
a) As to the overall width and overall length, all lead tops should be located within the range t
centring on the position which is at a theoretically correct distance of HE/2 or HD/2 from
the datum A or B.
b) As to the package width and length, the package end-face should be located within the
range f centring on the position which is at a theoretically correct distance of E/2 or D/2
from the datum A or B.
HD
D
H
D D
/2 /2
B
A
X4
tSAB
X4
f SAB
S
IEC  1676/2000
Figure 5
60191-6-3 © IEC:2000 – 9 –
HD /2, HE /2
D E
/2, /2
A
t
f
B
IEC  1677/2000
Figure 6
4.4.2 Measuring method
a) HE/HD
1) Put the package on the surface plate to establish the datum reference S.
2) Make the datum A and B coincide with the measuring reference.
3) Find the logically precise distances HD/2 and HE/2 from the datum A and B.
Then check if the tip of every lead on each package side is within the tolerance t
(range) specified as the centre.
b) E/D
1) Put the package on the surface plate to establish the datum reference S.
2) Make the datum A and B coincide with the measuring reference.
3) Find the theoretically precise distances D/2 and E/2 from the datum A and B.
Then check if the package edge on each package side is within the tolerance f (range)
specified as the centre.
4.5 Mounting height A
4.5.1 Description
Let the height of a package from the seating plane to the top of the package be denoted as
the mounting height. The mounting height therefore includes inclination and warping of the
package.
– 10 – 60191-6-3  IEC:200
...