IEC 61747-5-2:2011

Liquid crystal display devices - Part 5-2: Environmental, endurance and mechanical test methods - Visual inspection of active matrix colour liquid crystal display modules

IEC 61747-5-2:2011 gives the details of the quality assessment procedures and provides general rules for visual inspection of the active area of transmissive type active matrix colour liquid crystal display modules by the human eye. Furthermore, this standard includes defect definitions and the method for visual defect inspection.
NOTE 1 - Mura is excluded from this standard because it was not clearly specified at the time this standard was developed.
NOTE 2 - Restrictions on defect types, number, and sizes are specified in the quality contract (customer acceptance specification and incoming inspection specification) between panel and set makers.

Dispositifs d'affichage à cristaux liquides - Partie 5-2: Méthodes d'essais d'environnement, d'endurance et mécaniques - Inspection visuelle des modules d'affichage à cristaux liquides couleurs à matrice active

La CEI 61747-5-2:2011 indique les détails des procédures d'évaluation de la qualité et fournit les règles générales pour l'inspection visuelle, par l'oeil humain, de la zone active des modules d'affichage LCD couleurs à matrice active du type transmissif. En outre, la présente norme comprend des définitions de défauts et la méthode d'inspection visuelle de ces défauts.
NOTE 1 - L'effet Mura est exclu de la présente norme, car il n'était pas clairement spécifié au moment de l'élaboration de la présente norme.
NOTE 2 - Les restrictions relatives aux types de défauts, à leur nombre et à leurs dimensions, sont spécifiées dans le contrat de qualité (spécification d'acceptation du client et spécification du contrôle de réception) entre fabricants de panneaux et assembleurs.

General Information

• Status: Replaced
• Publication Date: 15-Jun-2011
• ICS: 31.120 - Electronic display devices
• Technical Committee: TC 110 - Electronic displays
• Drafting Committee: WG 2 - TC 110/WG 2
• Current Stage: DELPUB - Deleted Publication
• Completion Date: 24-Feb-2016

Relations

• Replaced By: IEC 61747-20-3:2016 - Liquid crystal display devices - Part 20-3: Visual inspection - Active matrix colour liquid crystal display modules
• Effective Date: 05-Sep-2023

Standards Content (Sample)

IEC 61747-5-2 ®
Edition 1.0 2011-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Liquid crystal display devices –
Part 5-2: Environmental, endurance and mechanical test methods – Visual
inspection of active matrix colour liquid crystal display modules

Dispositifs d'affichage à cristaux liquides –
Partie 5-2: Méthodes d'essais d'environnement, d'endurance et mécaniques –
Inspection visuelle des modules d'affichage à cristaux liquides couleurs à
matrice active
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or
IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: [e-mail]
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
 Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
 IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
 Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
 Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: [e-mail]
Tel.: [phone]
Fax: [phone]
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
 Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
 Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
 Electropedia: www.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
 Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: [e-mail]
Tél.: [phone]
Fax: [phone]
IEC 61747-5-2 ®
Edition 1.0 2011-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Liquid crystal display devices –
Part 5-2: Environmental, endurance and mechanical test methods – Visual
inspection of active matrix colour liquid crystal display modules

Dispositifs d'affichage à cristaux liquides –
Partie 5-2: Méthodes d'essais d'environnement, d'endurance et mécaniques –
Inspection visuelle des modules d'affichage à cristaux liquides couleurs à
matrice active
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX N
ICS 31.120 ISBN 978-2-88912-533-3

– 2 – 61747-5-2  IEC:2011
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Visual inspection method and criteria . 12
4.1 Standard inspection conditions . 12
4.1.1 Ambient conditions . 12
4.1.2 Visual inspection conditions . 12
4.1.3 Electrical driving conditions . 12
4.2 Standard inspection method . 12
4.2.1 Setup of inspection equipment and liquid crystal display modules . 12
4.2.2 Inspector and limit sample for visual inspection . 13
4.2.3 Inspection and record of result . 13
4.3 Criteria . 13
4.3.1 Bright subpixel defects . 13
4.3.2 Dark subpixel defects . 13
4.3.3 Intermediate subpixel defects . 13
4.3.4 Cluster subpixel defects . 13
4.3.5 Bright line defect . 13
4.3.6 Dark line defect . 13
4.3.7 Scratch and dent defect . 14
4.3.8 Foreign material and bubble defect . 14
4.3.9 Light leakage defect . 14
Bibliography . 15

Figure 1 – Classification of defect by visual inspection. 7
Figure 2 – Example of bright subpixel and adjacent subpixel defects in case of RGB
primary colour display . 8
Figure 3 – Example of dark subpixel and adjacent subpixel defects in case of RGB
primary colour display . 9
Figure 4 – Examples of minimum distance between subpixel defects . 10
Figure 5 – Example of light leakage between top case and outer black matrix . 11
Figure 6 – Shape of scratch and dent defect . 14
Figure 7 – Shape of foreign material and bubble defect . 14

Table 1 – Criteria of scratch and dent defects . 14
Table 2 – Criteria for foreign material and bubble defect . 14

61747-5-2  IEC:2011 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
LIQUID CRYSTAL DISPLAY DEVICES –

Part 5-2: Environmental, endurance
and mechanical test methods –
Visual inspection of active matrix
colour liquid crystal display modules

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61747-5-2 has been prepared by IEC technical committee 110:
Flat panel display devices.
The text of this standard is based on the following documents:
FDIS Report on voting
110/287/FDIS 110/306/RVD
Full information on the voting for the approval on this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.

– 4 – 61747-5-2  IEC:2011
A list of all parts of the IEC 61747 series, under the general title Liquid crystal display devices,
can be found on the IEC website.
Future standards in this series will carry the new general title as cited above. Titles of existing
standards in this series will be updated at the time of the next edition.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indic
...