IEC TR 61511-4:2020

Functional safety - Safety instrumented systems for the process industry sector - Part 4: Explanation and rationale for changes in IEC 61511-1 from Edition 1 to Edition 2

IEC TR 61511-4:2020(E), Functional safety - safety instrumented systems for the process industry sector, which is a Technical Report:
• specifies the rationale behind all clauses and the relationship between them,
• raises awareness for the most common misconceptions and misinterpretations of the clauses and the changes related to them,
• explains the differences between Ed. 1 and Ed. 2 of IEC 61511-1 and the reasons behind the changes,
• presents high level summaries of how to fulfil the requirements of the clauses, and
• explains differences in terminology between IEC 61508-4:2010 and IEC 61511-1 Ed. 2.

General Information

• Status: Published
• Publication Date: 18-Feb-2020
• ICS: 01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
• ICS: 13.110 - Safety of machinery
• ICS: 25.040.01 - Industrial automation systems in general
• Technical Committee: SC 65A - System aspects
• Current Stage: PPUB - Publication issued
• Start Date: 20-Feb-2020
• Completion Date: 19-Feb-2020

Standards Content (Sample)

IEC TR 61511-4 ®
Edition 1.0 2020-02
TECHNICAL
REPORT
Functional safety – Safety instrumented systems for the process industry
sector –
Part 4: Explanation and rationale for changes in IEC 61511-1 from Edition 1 to
Edition 2
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

IEC Central Office Tel.: [phone]
3, rue de Varembé [e-mail]
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and Definitions clause of
IEC publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or CISPR.

need further assistance, please contact the Customer Service

Centre: [e-mail].
IEC TR 61511-4 ®
Edition 1.0 2020-02
TECHNICAL
REPORT
Functional safety – Safety instrumented systems for the process industry

sector –
Part 4: Explanation and rationale for changes in IEC 61511-1 from Edition 1 to

Edition 2
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 13.110, ICS 25.040.01 ISBN 978-2-8322-7870-3

– 2 – IEC TR 61511-4:2020 © IEC 2020
CONTENTS
CONTENTS . 2
FOREWORD . 5
INTRODUCTION . 7
1 Scope . 8
2 Normative references . 8
3 Terms, definitions and abbreviated terms . 8
3.1 Terms and definitions . 8
3.2 Abbreviated terms . 9
4 Background . 10
5 Management of functional safety (IEC 61511-1 Ed. 2 Clause 5) . 10
5.1 Why is this clause important? . 10
5.2 Common misconceptions . 10
5.3 What was changed from Ed. 1 to Ed. 2 and why? . 11
5.3.1 Existing systems . 11
5.3.2 Change management . 11
5.3.3 Performance metrics and quality assurance . 11
5.3.4 Competency . 12
5.3.5 More requirements for functional safety product and service providers . 12
5.4 Summary on how . 12
6 Safety life cycle (IEC 61511-1 Ed. 2 Clause 6) . 12
6.1 Why is this clause important? . 12
6.2 Common misconceptions . 12
6.3 What was changed from Ed. 1 to Ed. 2 and why? . 13
6.4 Summary on how . 13
7 Verification (IEC 61511-1 Ed. 2 Clause 7). 13
7.1 Why is this clause important? . 13
7.2 Common misconceptions . 13
7.3 What was changed from Ed. 1 to Ed. 2 and why? . 13
7.4 Summary on how . 13
8 Hazard and risk analysis (IEC 61511-1 Ed. 2 Clause 8) . 13
8.1 Why is this clause important? . 13
8.2 Common misconceptions . 14
8.3 What was changed from Ed. 1 to Ed. 2 and why? . 14
8.4 Summary on how . 15
9 Allocation of safety functions to protection layers (IEC 61511-1 Ed. 2 Clause 9) . 15
9.1 Why is this clause important? . 15
9.2 Common misconceptions . 15
9.3 What was changed from Ed. 1 to Ed. 2 and why? . 16
9.3.1 Limits on BPCS protection layers . 16
9.3.2 Requirements for claiming RRF > 10 000 in total for instrumented
safeguards . 16
9.4 Summary on how . 16
10 SIS safety requirements specification (IEC 61511-1 Ed. 2 Clause 10) . 17
10.1 Why is this clause important? . 17
10.2 Common misconceptions . 17
10.3 What was changed from Ed. 1 to Ed. 2 and why? . 18

10.4 Summary on how . 18
11 Design and engineering (IEC 61511-1 Ed. 2 Clause 11) . 18
11.1 Why is this clause important? . 18
11.2 Common misconceptions . 18
11.3 What was changed from Ed. 1 to Ed. 2 and why? . 19
11.3.1 Hardware fault tolerance . 19
11.3.2 Security risk requirements . 20
11.3.3 Safety manual . 20
11.3.4 Requirements for system behaviour on detection of a fault . 20
11.3.5 Limitations on field device communication design . 21
11.4 Summary on how . 21
12 Application program development (IEC 61511-1 Ed. 2 Clause 12) . 21
12.1 Why is this clause important? . 21
12.2 Common misconceptions . 22
12.3 What was changed from Ed. 1 to Ed. 2 and why? . 22
12.4 Summary on how . 22
13 Factory acceptance test (IEC 61511-1 Ed. 2 Clause 13) . 22
13.1 Why is this clause important? . 22
13.2 Common misconceptions . 23
13.3 What was changed from Ed. 1 to Ed. 2 and why? . 23
13.4 Summary on how . 23
14 Installation (IEC 61511-1 Ed. 2 Clause 14) . 23
14.1 Why is this clause important? . 23
14.2 Common misconceptions . 24
14.3 What was changed from Ed. 1 to Ed. 2 and why? . 24
14.4 Summary on how . 24
15 Validation (IEC 61511-1 Ed. 2 Clause 15) . 24
15.1 Why is this clause important? . 24
15.2 Common misconceptions . 24
15.3 What was changed from Ed. 1 to Ed. 2 and why? . 24
15.4 Summary on how . 24
16 Operation and maintenance (IEC 61511-1 Ed. 2 Clause 16) . 25
16.1 Why is this clause important? . 25
16.2 Common misconceptions . 25
16.3 What was changed from Ed. 1 to Ed. 2 and why? . 26
16.3.1 Fault detection, bypassing, and compensating measures . 26
16.3.2 Proof testing after repair and change . 26
16.4 Summary on how . 26
17 Modification (IEC 61511-1 Ed. 2 Clause 17) . 26
17.1 Why is this clause important? . 26
17.2 Common misconceptions . 26
17.3 What was changed from Ed. 1 to Ed. 2 and why? . 27
Planning for and completing change . 27
17.4 Summary on how . 27
18 Decommissioning (IEC 61511-1 Ed. 2 Clause 18) . 27
18.1 Why is this clause important? . 27
18.2 Common misconceptions . 27

– 4 – IEC TR 61511-4:2020 © IEC 2020
18.3 What was changed from Ed. 1 to Ed. 2 and why? . 28
18.3.1 Planning for and completing change . 28
18.4 Summary on how . 28
19 Documentation (IEC 61511-1 Ed. 2 Clause 19) . 28
19.1 Why is this clause important? .
...