IEC 60364-1:2005
(Main)Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions
Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions
Gives the rules for the design, erection, and verification of electrical installations. The rules are intended to provide for the safety of persons, livestock and property against dangers and damage which may arise in the reasonable use of electrical installations and to provide for the proper functioning of those installations. IEC 60364-1 applies to the design, erection and verification of electrical installations such as those of a) residential premises; b) commercial premises; c) public premises; d) industrial premises; e) agricultural and horticultural premises; f) prefabricated buildings; g) caravans, caravan sites and similar sites; h) construction sites, exhibitions, fairs and other installations for temporary purposes; i) marinas; j) external lighting and similar installations; k) medical locations; l) mobile or transportable units; m) photovoltaic systems; n) low-voltage generating sets. IEC 60364-1 covers a) circuits supplied at nominal voltages up to and including 1 000 V a.c. or 1 500 V d.c.; b) circuits, other than the internal wiring of apparatus, operating at voltages exceeding 1 000 V and derived from an installation having a voltage not exceeding 1 000 V a.c., for example, discharge lighting, electrostatic precipitators; c) wiring systems and cables not specifically covered by the standards for appliances; d) all consumer installations external to buildings; e) fixed wiring for information and communication technology, signalling, control and the like (excluding internal wiring of apparatus); f) the extension or alteration of the installation and also parts of the existing installation affected by the extension or alteration. The contents of the corrigendum of August 2009 have been included in this copy.
Installations électriques à basse tension - Partie 1: Principes fondamentaux, détermination des caractéristiques générales, définitions
Donne des règles pour la conception, la mise en uvre et la vérification des installations électriques. Ces règles sont Destinées à assurer la sécurité des personnes, des animaux et des biens contre les dangers et les dommages susceptibles de se produire lors d'une utilisation raisonnable des installations électriques et à assurer le fonctionnement correct de ces installations. La CEI 60364-1 s'applique à la conception, à la mise en uvre et aux vérifications des installations électriques telles que celles des: a) bâtiments à usage d'habitation; b) bâtiments à usage commercial; c) établissements recevant du public; d) établissements industriels; e) établissements agricoles et horticoles; f) bâtiments préfabriqués; g) caravanes, terrains de campement et installations analogues; h) hantiers, fêtes foraines, foires, expositions et autres installations temporaires; i) marinas; j) éclairages extérieurs et analogues; k) locaux médicaux; l) unités mobiles ou transportables; m) réseaux photovoltaïques; n) groupes générateurs à basse tension. La CEI 60364-1 est applicable: a) aux circuits alimentés sous une tension nominale au plus égale à 1 000 V en courant alternatif et à 1 500 V en courant continu; b) aux circuits, autres que les circuits internes des appareils, fonctionnant sous une tension supérieure à 1 000 V à partir d'une installation de tension au plus égale à 1 000 V en courant alternatif, par exemple: circuits de lampes à décharge, dépoussiéreurs électrostatiques; c) à tout câblage et à toute canalisation qui ne font pas l'objet des normes relatives aux appareils d'utilisation; d) à toutes les installations d'utilisateur situées à l'extérieur des bâtiments; e) aux canalisations fixes de communication, de signalisation ou de commande (à l'exception de circuits internes des appareils); f) aux extensions ou modifications d'installations ainsi qu'aux parties des installations existantes affectées par ces extensions ou modifications. Le contenu du corrigendum d'août 2009 a été pris en considération dans cet exemplaire.
General Information
Relations
Buy Standard
Standards Content (Sample)
INTERNATIONAL IEC
STANDARD 60364-1
Fifth edition
2005-11
Low-voltage electrical installations –
Part 1:
Fundamental principles, assessment
of general characteristics, definitions
This English-language version is derived from the original
bilingual publication by leaving out all French-language
pages. Missing page numbers correspond to the French-
language pages.
Reference number
Publication numbering
As from 1 January 1997 all IEC publications are issued with a designation in the
60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1.
Consolidated editions
The IEC is now publishing consolidated versions of its publications. For example,
edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the
base publication incorporating amendment 1 and the base publication incorporating
amendments 1 and 2.
Further information on IEC publications
The technical content of IEC publications is kept under constant review by the IEC,
thus ensuring that the content reflects current technology. Information relating to
this publication, including its validity, is available in the IEC Catalogue of
publications (see below) in addition to new editions, amendments and corrigenda.
Information on the subjects under consideration and work in progress undertaken
by the technical committee which has prepared this publication, as well as the list
of publications issued, is also available from the following:
• IEC Web Site (www.iec.ch)
• Catalogue of IEC publications
The on-line catalogue on the IEC web site (www.iec.ch/searchpub) enables you to
search by a variety of criteria including text searches, technical committees
and date of publication. On-line information is also available on recently issued
publications, withdrawn and replaced publications, as well as corrigenda.
• IEC Just Published
This summary of recently issued publications (www.iec.ch/online_news/ justpub)
is also available by email. Please contact the Customer Service Centre (see
below) for further information.
• Customer Service Centre
If you have any questions regarding this publication or need further assistance,
please contact the Customer Service Centre:
Email: custserv@iec.ch
Tel: +41 22 919 02 11
Fax: +41 22 919 03 00
INTERNATIONAL IEC
STANDARD 60364-1
Fifth edition
2005-11
Low-voltage electrical installations –
Part 1:
Fundamental principles, assessment
of general characteristics, definitions
IEC 2005 Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical,
including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
PRICE CODE
X
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue
60364-1 IEC:2005 – 3 –
CONTENTS
FOREWORD.9
11 Scope.13
12 Normative references.17
13 Fundamental principles.19
131 Protection for safety.19
131.1 General.19
131.2 Protection against electric shock .19
131.3 Protection against thermal effects .21
131.4 Protection against overcurrent.21
131.5 Protection against fault currents .21
131.6 Protection against voltage disturbances and measures against
electromagnetic influences .21
131.7 Protection against power supply interruption .23
132 Design.23
132.1 General.23
132.2 Characteristics of available supply or supplies .23
132.3 Nature of demand.25
132.4 Electric supply systems for safety services or standby electric
supply systems.25
132.5 Environmental conditions.25
132.6 Cross-sectional area of conductors .25
132.7 Type of wiring and methods of installation.27
132.8 Protective equipment.27
132.9 Emergency control.27
132.10 Disconnecting devices.27
132.11 Prevention of mutual detrimental influence .27
132.12 Accessibility of electrical equipment .27
132.13 Documentation for the electrical installation .29
133 Selection of electrical equipment .29
133.1 General.29
133.2 Characteristics.29
133.3 Conditions of installation .29
133.4 Prevention of harmful effects.31
134 Erection and verification of electrical installations .31
134.1 Erection.31
134.2 Initial verification.33
134.3 Periodic verification.33
20 Terms and definitions .33
30 Assessment of general characteristics.33
31 Purposes, supplies and structure.33
311 Maximum demand and diversity .33
312 Conductor arrangement and system earthing .33
312.1 Current-carrying conductors depending on kind of current.35
312.2 Types of system earthing .37
60364-1 IEC:2005 – 5 –
313 Supplies.71
313.1 General.71
313.2 Supplies for safety services and standby systems .71
314 Division of installation.71
32 Classification of external influences.73
33 Compatibility.73
33.1 Compatibility of characteristics .73
33.2 Electromagnetic compatibility.73
34 Maintainability.73
35 Safety services.75
35.1 General .75
35.2 Classification .75
36 Continuity of service.75
Annex A (informative) Numbering system and plan of IEC 60364 series.77
Annex B (informative) Definitions – Application guide and explanations to selected
terms of IEC 60050-826 (IEV 826 – Electrical Installations) .83
Annex C (informative) Comparison of the structure of IEC 60364-1 fourth edition 2001
and IEC 60364-1 fifth edition 2005.89
Bibliography.93
Figure 1 – Single-phase 2-wire .35
Figure 2 – Single-phase 3-wire .35
Figure 3 – Two-phase 3-wire.35
Figure 4 – Three-phase 3-wire .35
Figure 5 – Three-phase 4-wire .37
Figure 6 – 2-wire.37
Figure 7 – 3-wire.37
Figure 31A1 – TN-S system with separate neutral conductor and protective conductor
throughout the system .39
Figure 31A2 – TN-S system with separate earthed line conductor and protective
conductor throughout the system .41
Figure 31A3 – TN-S system with earthed protective conductor and no distributed
neutral conductor throughout the system .41
Figure 31B1 – TN-C-S system 3-phase, 4-wire, where the PEN is separated into PE
and N elsewhere in the installation .43
Figure 31B2 – TN-C-S system 3-phase, 4-wire where the PEN is separated into PE
and N at the origin of the installation.45
Figure 31B3 – TN-C-S system – Single-phase, 2-wire where the PEN is separated into
PE and N at the origin of the installation .45
Figure 31C – TN-C system with neutral and protective conductor functions combined in
a single conductor throughout the system .47
Figure 31D – TN-C-S multiple source system with separate protective conductor and
neutral conductor to current using equipment.49
Figure 31E – TN multiple source system with protective conductor and no neutral
conductor throughout the system for 2- or 3-phase load.51
60364-1 IEC:2005 – 7 –
Figure 31F1 – TT system with separate neutral conductor and protective conductor
throughout the installation.53
Figure 31F2 – TT system with earthed protective conductor and no distributed neutral
conductor throughout the installation .55
Figure 31G1 – IT system with all exposed-conductive-parts interconnected by a
protective conductor which is collectively earthed .57
Figure 31G2 – IT system with exposed-conductive-parts earthed in groups or
individually.59
Figure 31H – TN-S d.c. system .61
Figure 31J – TN-C d.c. system.63
Figure 31K – TN-C-S d.c. system.65
Figure 31L – TT d.c. system .67
Figure 31M – IT d.c. system.
...
NORME CEI
INTERNATIONALE 60364-1
Cinquième édition
2005-11
Installations électriques à basse tension –
Partie 1:
Principes fondamentaux, détermination
des caractéristiques générales, définitions
Cette version française découle de la publication d’origine
bilingue dont les pages anglaises ont été supprimées.
Les numéros de page manquants sont ceux des pages
supprimées.
Numéro de référence
CEI 60364-1:2005(F)
Numérotation des publications
Depuis le 1er janvier 1997, les publications de la CEI sont numérotées à partir de
60000. Ainsi, la CEI 34-1 devient la CEI 60034-1.
Editions consolidées
Les versions consolidées de certaines publications de la CEI incorporant les
amendements sont disponibles. Par exemple, les numéros d’édition 1.0, 1.1 et 1.2
indiquent respectivement la publication de base, la publication de base incorporant
l’amendement 1, et la publication de base incorporant les amendements 1 et 2
Informations supplémentaires sur les publications de la CEI
Le contenu technique des publications de la CEI est constamment revu par la CEI
afin qu'il reflète l'état actuel de la technique. Des renseignements relatifs à cette
publication, y compris sa validité, sont disponibles dans le Catalogue des
publications de la CEI (voir ci-dessous) en plus des nouvelles éditions, amende-
ments et corrigenda. Des informations sur les sujets à l’étude et l’avancement des
travaux entrepris par le comité d’études qui a élaboré cette publication, ainsi que la
liste des publications parues, sont également disponibles par l’intermédiaire de:
• Site web de la CEI (www.iec.ch)
• Catalogue des publications de la CEI
Le catalogue en ligne sur le site web de la CEI (www.iec.ch/searchpub) vous permet
de faire des recherches en utilisant de nombreux critères, comprenant des
recherches textuelles, par comité d’études ou date de publication. Des informations
en ligne sont également disponibles sur les nouvelles publications, les publications
remplacées ou retirées, ainsi que sur les corrigenda.
• IEC Just Published
Ce résumé des dernières publications parues (www.iec.ch/online_news/justpub)
est aussi disponible par courrier électronique. Veuillez prendre contact avec le
Service client (voir ci-dessous) pour plus d’informations.
• Service clients
Si vous avez des questions au sujet de cette publication ou avez besoin de
renseignements supplémentaires, prenez contact avec le Service clients:
Email: custserv@iec.ch
Tél: +41 22 919 02 11
Fax: +41 22 919 03 00
NORME CEI
INTERNATIONALE 60364-1
Cinquième édition
2005-11
Installations électriques à basse tension –
Partie 1:
Principes fondamentaux, détermination
des caractéristiques générales, définitions
IEC 2005 Droits de reproduction réservés
Aucune partie de cette publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun
procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit de l'éditeur.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
CODE PRIX
X
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
– 2 – 60364-1 CEI:2005
SOMMAIRE
AVANT-PROPOS.8
11 Domaine d'application.12
12 Références normatives.16
13 Principes fondamentaux .18
131 Protection pour assurer la sécurité .18
131.1 Généralités.18
131.2 Protection contre les chocs électriques .18
131.3 Protection contre les effets thermiques.20
131.4 Protection contre les surintensités.20
131.5 Protection contre les courants de défaut .20
131.6 Protection contre les perturbations de tension et dispositions contre
les influences électromagnétiques.20
131.7 Protection contre les interruptions de l’alimentation.22
132 Conception des installations électriques.22
132.1 Généralités.22
132.2 Caractéristiques de l'alimentation disponible ou de remplacement .22
132.3 Nature de la demande .24
132.4 Alimentation de sécurité ou de remplacement .24
132.5 Conditions d'environnement .24
132.6 Section des conducteurs .24
132.7 Type de canalisation et mode de pose des canalisations.26
132.8 Dispositifs de protection .26
132.9 Dispositifs de coupure d'urgence.26
132.10 Dispositifs de sectionnement.26
132.11 Prévention d’influence mutuelle destructrice.26
132.12 Accessibilité des matériels électriques .26
132.13 Documentation relative à l’installation électrique .28
133 Choix des matériels électriques.28
133.1 Généralités.28
133.2 Caractéristiques.28
133.3 Conditions d'installation.28
133.4 Prévention des effets néfastes .30
134 Réalisation et vérification des installations électriques .30
134.1 Réalisation.30
134.2 Vérification lors de la mise en service .32
134.3 Vérifications périodiques.32
20 Définitions.32
30 Détermination des caractéristiques générales .32
31 Objet, alimentations et structures .32
311 Demande maximale et diversité.32
312 Disposition des conducteurs et mise à la terre.32
312.1 Conducteurs actifs en fonction du courant.34
312.2 Types de schémas des liaisons à la terre .36
– 4 – 60364-1 CEI:2005
313 Alimentations .70
313.1 Généralités.70
313.2 Alimentations pour services de sécurité et alimentations de
remplacement .70
314 Division des installations .70
32 Classification des influences externes .72
33 Compatibilité.72
33.1 Compatibilité des caractéristiques .72
33.2 Compatibilité électromagnétique.72
34 Maintenabilité.72
35 Installations de sécurité .74
35.1 Généralités.74
35.2 Classification.74
36 Continuité de service.74
Annexe A (informative) Système de numérotage de la série CEI 60364 .76
Annexe B (informative) Définitions – Guide d’application et explications des termes
choisis dans la CEI 60050-826 (VEI 826 – Installations électriques) .82
Annexe C (informative) Comparaison entre la structure de la CEI 60364-1: quatrième
édition (2001) et celle de la CEI 60364-1: cinquième édition (2005) .88
Bibliographie.92
Figure 1 – Monophasé 2 conducteurs .34
Figure 2 – Monophasé 3 conducteurs .34
Figure 3 – Biphasé 3 conducteurs.34
Figure 4 – Triphasé 3 conducteurs.34
Figure 5 – Triphasé 4 conducteurs.36
Figure 6 – 2 conducteurs .36
Figure 7 – 3 conducteurs .36
Figure 31A1 – Schéma TN-S avec conducteur neutre et conducteur de protection
distincts dans l’ensemble du schéma .38
Figure 31A2 – Schéma TN-S avec conducteur de phase mis à la terre et conducteur
de protection distincts dans l’ensemble du schéma.40
Figure 31A3 – Schéma TN-S avec conducteur de protection mis à la terre et pas de
distribution du conducteur neutre dans l’ensemble du schéma .40
Figure 31B1 – Schéma TN-C-S – Triphasé 4 conducteurs avec PEN séparé en PE et N
en un point de l’installation .42
Figure 31B2 – Schéma TN-C-S – Triphasé 4 conducteurs avec PEN séparé en PE et N
à l’origine de l’installation .44
Figure 31B3 – Schéma TN-C-S – Monophasé 2 conducteurs avec PEN séparé en PE
et N à l’origine de l’installation .44
Figure 31C – Schéma TN-C avec fonctions de neutre et de protection confondues en
un seul conducteur dans l’ensemble du schéma .46
Figure 31D – Schéma TN-C-S à sources multiples avec conducteur de protection et
conducteur de neutre séparés dans l’ensemble du schéma.48
Figure 31E –Schéma TN à sources multiples avec conducteur de protection et
absence de conducteur neutre dans l’ensemble du schéma. .50
– 6 – 60364-1 CEI:2005
Figure 31F1 – Schéma TT avec conducteur de protection et conducteur de neutre
séparés dans l’ensemble du schéma. .52
Figure 31F2 – Schéma TT avec conducteur de protection et absence de conducteur
neutre dans l’ensemble du schéma .54
Figure 31G1 – Schéma IT avec toutes les masses interconnectées par un conducteur
de protection mis collectivement à la terre .56
Figure 31G2 – Schéma IT avec toutes les masses mises à la terre en groupes ou
individuellement.58
Figure 31H – Schéma TN-S en courant continu (d.c.) .60
Figure 31J – Schéma TN-C en courant continu (d.c.) .62
Figure 31K – Schéma TN-C-S en courant continu (d.c.) .64
Figure 31L – Schéma TT en courant continu (d.c.).66
Figure 31M – Schéma IT en courant continu (d.c.) .68
Figure B.1 (21a) – Volume d’accessibilité .
...
IEC 60364-1
Edition 5.0 2005-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Low-voltage electrical installations –
Part 1: Fundamental principles, assessment of general characteristics,
definitions
Installations électriques à basse tension –
Partie 1: Principes fondamentaux, détermination des caractéristiques générales,
définitions
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or
IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.
IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: inmail@iec.ch
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: csc@iec.ch
Tel.: +41 22 919 02 11
Fax: +41 22 919 03 00
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
ƒ Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
ƒ Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
ƒ Electropedia: www.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
ƒ Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: csc@iec.ch
Tél.: +41 22 919 02 11
Fax: +41 22 919 03 00
IEC 60364-1
Edition 5.0 2005-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Low-voltage electrical installations –
Part 1: Fundamental principles, assessment of general characteristics,
definitions
Installations électriques à basse tension –
Partie 1: Principes fondamentaux, détermination des caractéristiques générales,
définitions
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
X
CODE PRIX
ICS 91.140.50 ISBN 2-8318-8354-7
– 2 – 60364-1 © IEC:2005
CONTENTS
FOREWORD.5
11 Scope.7
12 Normative references.9
13 Fundamental principles.10
131 Protection for safety.10
131.1 General.10
131.2 Protection against electric shock .10
131.3 Protection against thermal effects .11
131.4 Protection against overcurrent.11
131.5 Protection against fault currents .11
131.6 Protection against voltage disturbances and measures against
electromagnetic influences .11
131.7 Protection against power supply interruption .12
132 Design.12
132.1 General.12
132.2 Characteristics of available supply or supplies .12
132.3 Nature of demand.13
132.4 Electric supply systems for safety services or standby electric
supply systems.13
132.5 Environmental conditions.13
132.6 Cross-sectional area of conductors .13
132.7 Type of wiring and methods of installation.14
132.8 Protective equipment.14
132.9 Emergency control.14
132.10 Disconnecting devices.14
132.11 Prevention of mutual detrimental influence .14
132.12 Accessibility of electrical equipment .14
132.13 Documentation for the electrical installation .15
133 Selection of electrical equipment .15
133.1 General.15
133.2 Characteristics.15
133.3 Conditions of installation .
133.4 Prevention of harmful effects.16
134 Erection and verification of electrical installations .16
134.1 Erection.16
134.2 Initial verification.
134.3 Periodic verification.17
20 Terms and definitions .17
30 Assessment of general characteristics.17
31 Purposes, supplies and structure.17
311 Maximum demand and diversity .17
312 Conductor arrangement and system earthing .17
312.1 Current-carrying conductors depending on kind of current.18
312.2 Types of system earthing .
60364-1 © IEC:2005 – 3 –
313 Supplies.36
313.1 General.36
313.2 Supplies for safety services and standby systems .36
314 Division of installation.36
32 Classification of external influences.37
33 Compatibility.37
33.1 Compatibility of characteristics .37
33.2 Electromagnetic compatibility.37
34 Maintainability.37
35 Safety services.38
35.1 General .38
35.2 Classification .38
36 Continuity of service.38
Annex A (informative) Numbering system and plan of IEC 60364 series.39
Annex B (informative) Definitions – Application guide and explanations to selected
terms of IEC 60050-826 (IEV 826 – Electrical Installations) .42
Annex C (informative) Comparison of the structure of IEC 60364-1 fourth edition 2001
and IEC 60364-1 fifth edition 2005.45
Bibliography.47
Figure 1 – Single-phase 2-wire .18
Figure 2 – Single-phase 3-wire .18
Figure 3 – Two-phase 3-wire.18
Figure 4 – Three-phase 3-wire .18
Figure 5 – Three-phase 4-wire .19
Figure 6 – 2-wire.19
Figure 7 – 3-wire.19
Figure 31A1 – TN-S system with separate neutral conductor and protective conductor
throughout the system .20
Figure 31A2 – TN-S system with separate earthed line conductor and protective
conductor throughout the system .21
Figure 31A3 – TN-S system with earthed protective conductor and no distributed
neutral conductor throughout the system .21
Figure 31B1 – TN-C-S system 3-phase, 4-wire, where the PEN is separated into PE
and N elsewhere in the installation .22
Figure 31B2 – TN-C-S system 3-phase, 4-wire where the PEN is separated into PE
and N at the origin of the installation.23
Figure 31B3 – TN-C-S system – Single-phase, 2-wire where the PEN is separated into
PE and N at the origin of the installation .23
Figure 31C – TN-C system with neutral and protective conductor funct
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.