IEC 61097-2:2002

Global maritime distress and safety system (GMDSS) - Part 2: COSPAS-SARSAT EPIRB - Satellite emergency position indicating radio beacon operating on 406 MHz - Operational and performance requirements, methods of testing and required test results

Specifies the minimum performance requirements, technical characteristics and type-testing requirements of the satellite emergency position-indicating radio beacon used in the COSPAS-SARSAT satellite system (satellite EPIRB), as required by the International Convention for Safety of Life at Sea (SOLAS).

General Information

• Status: Published
• Publication Date: 25-Sep-2002
• ICS: 47.020.70 - Navigation and control equipment
• Technical Committee: TC 80 - Maritime navigation and radiocommunication equipment and systems
• Drafting Committee: WG 8 - TC 80/WG 8
• Current Stage: DELPUB - Deleted Publication
• Completion Date: 22-Jan-2008

Relations

• Revised: IEC 61097-2:2008 - Global maritime distress and safety system (GMDSS) - Part 2: COSPAS-SARSAT EPIRB - Satellite emergency position indicating radio beacon operating on 406 MHz - Operational and performance requirements, methods of testing and required test results
• Effective Date: 05-Sep-2023

Standards Content (Sample)

INTERNATIONAL IEC
STANDARD
61097-2
Second edition
2002-09
Global maritime distress and safety
system (GMDSS) –
Part 2:
COSPAS-SARSAT EPIRB –
Satellite emergency position indicating radio
beacon operating on 406 MHz –
Operational and performance requirements,
methods of testing and required test results

Reference number
Publication numbering
As from 1 January 1997 all IEC publications are issued with a designation in the

60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1.

Consolidated editions
The IEC is now publishing consolidated versions of its publications. For example,

edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the

base publication incorporating amendment 1 and the base publication incorporating

amendments 1 and 2.
Further information on IEC publications
The technical content of IEC publications is kept under constant review by the IEC,
thus ensuring that the content reflects current technology. Information relating to
this publication, including its validity, is available in the IEC Catalogue of
publications (see below) in addition to new editions, amendments and corrigenda.
Information on the subjects under consideration and work in progress undertaken
by the technical committee which has prepared this publication, as well as the list
of publications issued, is also available from the following:
• IEC Web Site (www.iec.ch)
• Catalogue of IEC publications
The on-line catalogue on the IEC web site (http://www.iec.ch/searchpub/cur_fut.htm)
enables you to search by a variety of criteria including text searches, technical
committees and date of publication. On-line information is also available on
recently issued publications, withdrawn and replaced publications, as well as
corrigenda.
• IEC Just Published
This summary of recently issued publications (http://www.iec.ch/online_news/
justpub/jp_entry.htm) is also available by email. Please contact the Customer
Service Centre (see below) for further information.
• Customer Service Centre
If you have any questions regarding this publication or need further assistance,
please contact the Customer Service Centre:
Email: [e-mail]
Tel: [phone]
Fax: [phone]
INTERNATIONAL IEC
STANDARD
61097-2
Second edition
2002-09
Global maritime distress and safety
system (GMDSS) –
Part 2:
COSPAS-SARSAT EPIRB –
Satellite emergency position indicating radio
beacon operating on 406 MHz –
Operational and performance requirements,
methods of testing and required test results

 IEC 2002  Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail]  Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale
W
International Electrotechnical Commission
Международная Электротехническая Комиссия
For price, see current catalogue

– 2 – 61097-2  IEC:2002(E)
CONTENTS
FOREWORD . 4

INTRODUCTION .5

1 Scope . 6

2 Normative references. 6

3 Performance requirements. 7

3.1 Compliance . 7

3.2 General . 8
3.3 Operational. 8
3.4 Distress function.10
3.5 Float-free arrangements .11
3.6 Environment .11
3.7 Environment for float-free arrangement.12
3.8 Interference – electromagnetic compatibility .12
3.9 Maintenance.12
3.10 Safety precautions.12
3.11 Equipment manuals .13
3.12 Labelling.14
3.13 Installation.14
4 Technical characteristics .15
4.1 Transmitted frequency .15
4.2 Signal and message format .15
4.3 Distress message memory.15
4.4 Beacon identification code .15
4.5 121,5 MHz homing signal.15
4.6 Power source.15
4.7 Antenna characteristics (C/S T.001) .16
5 Methods of testing and required test results.16
5.1 General .16
5.2 General tests .18
5.3 Operational tests .19
5.4 Distress function.21

5.5 Float-free arrangements .22
5.6 Environment .22
5.7 Maintenance.23
5.8 Safety precautions.23
5.9 Equipment manuals .23
5.10 Labelling.23
5.11 Installation.23
5.12 Power source.23
5.13 Environment .24
5.14 Interference testing.26
5.15 Spurious emissions.26
5.16 Compass safe distance.26
5.17 Conducted interference.26

61097-2  IEC:2002(E) – 3 –
Annex A (normative) Sequence of tests.27

A.1 Compulsory sequence of tests .27

A.2 Additional tests .27

Annex B (normative) List of COSPAS-SARSAT tests.29

B.1 Power output .29

B.2 Digital message .29

B.3 Digital message generator .29

B.4 Modulation.29
B.5 406 MHz transmitted frequency.30
B.6 Spurious emissions (into 50 Ω) .30
B.7 406 MHz VSWR check.30
B.8 Self-test mode .30
B.9 Thermal shock (30 °C change).30
B.10 Operating lifetime at minimum temperature.31
B.11 Temperature gradient (5 °C/h) .31
B.12 Long-term frequency stability.31
B.13 Protection against continuous transmission .31
B.14 Satellite qualitative tests .31
B.15 Antenna characteristics.31
B.16 Beacon Coding Software.32
B.17 Navigation System.32
Annex C (normative) Standard for a manually activated satellite EPIRB without a
float-free mechanism.33
C.1 Requirements .33
Annex D (normative) Technical standard for 121,5 MHz homing device.34
D.1 General .34
D.2 Performance requirements.34
D.3 Technical characteristics .34

D.4 Methods of testing and required test results.35
Annex E (informative) User experience of COSPAS-SARSAT EPIRB operation .40

– 4 – 61097-2  IEC:2002(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION

____________
GLOBAL MARITIME DISTRESS AND SAFETY SYSTEM (GMDSS) –

Part 2: COSPAS-SARSAT EPIRB – Satellite emergency position

indicating radio beacon operating on 406 MHz –

Operational and performance requirements,

methods of testing and required test results

FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International
Organization for Standardization (ISO) in accordance with conditions determined by agreement between the
two organizations.
2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested National Committees.
3) The documents produced have the form of recommendations for international use and are published in the form
of standards, technical specifications, technical reports or guides and they are accepted by the National
Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with one of its standards.
6) Attention is drawn to the possibility that some of the elements of this I
...