IEC 60335-1:2020/ISH1:2021
(Main)Interpretation Sheet 1 - Household and similar electrical appliances - Safety - Part 1: General requirements
Interpretation Sheet 1 - Household and similar electrical appliances - Safety - Part 1: General requirements
General Information
Relations
Standards Content (Sample)
IEC 60335-1:2020/ISH1:2021 – 1 –
© IEC 2021
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
IEC 60335-1
Edition 6.0 2020-09
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES – SAFETY –
Part 1: General requirements
INTERPRETATION SHEET 1
This interpretation sheet has been prepared by IEC technical committee 61: Safety of
household and similar electrical appliances.
The text of this Interpretation Sheet is based on the following documents:
Draft Report on voting
61/5999/DISH 61/6009/RVDISH
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
___________
INTRODUCTION
Edition 6 of IEC 60335-1:2020 defines and introduces requirements for a detachable
power supply part of an applianc
...
This May Also Interest You
- Standard1 pageEnglish languagesale 15% off
IEC 60335-2-119:2021 deals with the safety of commercial electric packaging appliances using vacuum conditions for food preservation, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances.
These appliances are not intended for household and similar purposes. They are used for commercial preservation of food in areas not open to the public, for example in kitchens of restaurants, canteens, hospitals and in commercial enterprises such as bakeries and butcheries.
Examples of appliances that are within the scope of this standard are:
– chamber vacuum packaging appliances;
– vacuum packaging appliances.
These appliances may be provided with a film-sealing function.
This standard also deals with the hygiene aspects of appliances.
As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by users. However, in general, it does not consider young children playing with the appliance.
Attention is drawn to the fact that:
– for appliances intended to be used in vehicles or onboard ships or aircraft, additional requirements may be necessary;
– in many countries, additional requirements for appliances incorporating pressure vessels are specified;
– in many countries, additional requirements are specified by the national health authorities, the national authorities responsible for the protection of labour, the national water supply authorities and similar authorities.
This standard does not apply to:
– appliances which operate with injection in the vacuum chamber of inert gas with an oxygen content exceeding 21 %;
– appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas);
– vacuum packaging appliances for household and similar use (IEC 60335-2-45);
– battery-operated appliances.
This Part 2 is to be used in conjunction with the latest edition of IEC 60335-1 and its amendments unless that edition precludes it; in that case, the latest edition that does not preclude it is used. It was established on the basis of the sixth edition (2020) of that standard.
- Standard42 pagesEnglish and French languagesale 15% off
IEC 60335-1:2020 deals with the safety of electrical appliances for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances including direct current (DC) supplied appliances and battery-operated appliances.
Appliances not intended for normal household use but which nevertheless may be a source of danger to the public, such as appliances intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard.
This standard deals with the reasonably foreseeable hazards presented by appliances that are encountered by all persons. However, in general, it does not take into account:
– persons (including children) whose physical, sensory or mental capabilities, or lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction;
– children playing with the appliance.
Additional requirements may be necessary for appliances intended to be used in vehicles or on board ships or aircraft. In many countries, additional requirements are specified by the national health authorities, the national authorities responsible for the protection of labour, the national water supply authorities and similar authorities.
This standard does not apply to:
– appliances intended exclusively for industrial purposes;
– appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas);
– audio, video and similar electronic apparatus (IEC 60065);
– medical electrical equipment (IEC 60601 series);
– hand-held motor-operated electric tools (IEC 60745 series);
– information technology equipment (IEC 60950-1);
– transportable motor-operated electric tools (IEC 61029 series);
– audio/video, information and communication technology equipment (IEC 62368-1);
– electric motor-operated hand-held tools, transportable tools and lawn and garden machinery (IEC 62841 series).
This sixth edition cancels and replaces the fifth edition published in 2010, Amendment 1: 2013 and Amendment 2:2016. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition (minor changes are not listed):
a) updated the text of this standard to align with the most recent editions of the dated normative references;
b) deleted some notes and converted many other notes, in whole or in part, to normative text;
c) changed some Annex designations from normative to informative;
d) introduced information on Guidance documents concerning the application of the safety requirements covered by IEC 60335 series and on how to retrieve them;
e) clarified requirements for PELV circuits;
f) clarification of requirements on measurement of power input and rated current when they vary throughout the operating cycle;
g) replaced normative Annex S with the informative Annex S "Guidance for the application of this standard on measurement of power input and current based on the requirements of 10.1 and 10.2 concerning the representative period";
h) introduced and clarified mechanical strength requirements for appliances with integral pins for insertion into socket-outlets;
i) revised requirements for battery-operated appliances;
j) introduced requirements for metal-ion batteries including a new Clause 12 Charging of metal-ion batteries;
k) introduced the application of test probe 18;
l) introduced requirements for appliances incorporating appliance outlets and socket-outlets accessible to the user;
m) revised and clarified requirements for appliances incorporating a functional earth;
n) introduced moisture resistance test requirements for appliances that incorporate an automatic cord reel and that have a second numeral IP rating;
o) clarified the appliance test criteria for the moisture resistance for appliances and parts of appliances with inte
- Standard210 pagesEnglish languagesale 15% off
- Standard434 pagesEnglish and French languagesale 15% off
Provides terminology for the various fibre optic elements, devices and systems.
- Standard5 pagesEnglish and French languagesale 15% off
IEC 60335-1:2010 deals with the safety of electrical appliances for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. Battery-operated appliances and other d.c. supplied appliances are within the scope of this standard. Appliances not intended for normal household use but which nevertheless may be a source of danger to the public, such as appliances intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard. Examples of such appliances are catering equipment, cleaning appliances for commercial use, and appliances for hairdressers. The principal changes in this edition as compared with the fourth edition are as follows:
- updated the text of the standard to align with the most recent editions of the dated normative references;
- modified the functional safety requirements using programmable electronic circuits including software validation requirements;
- updated Clause 29 to cover insulation requirements subjected to high frequency voltages as in switch mode power supply circuits;
- updated Subclause 30.2 to further align the pre-selection option with the end-product test option;
- deleted some notes and converted many other notes to normative text;
- clarified requirements for class III constructions.
The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 12 months or later than 36 months from the date of publication. The contents of the corrigenda of July 2010 and April 2011 have been included in this copy.
- Standard334 pagesEnglish and French languagesale 15% off
The contents of the corrigendum of September 2016 and the Interpretation sheet of April 2020 have been included in this copy.
- Standard21 pagesEnglish and French languagesale 15% off
- Standard5 pagesEnglish and French languagesale 15% off
Applies to analogue pneumatic signals used in process control systems to transmit information between the elements of systems and gives definitions, units and the recommended value of the range of the analogue pneumatic signal.
- Standard42 pagesEnglish and French languagesale 15% off
- Standard4 pagesEnglish and French languagesale 15% off
IEC 60335-2-109:2010 deals with the safety of UV radiation water treatment appliances for household and similar purposes, their rated voltage being not more than 250 V. Appliances not intended for normal household use but that nevertheless may be a source of danger to the public, such as appliances intended to be used by laymen in shops and in light industry and farms, are within the scope of this standard. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 12 months or later than 36 months from the date of publication.
- Standard33 pagesEnglish and French languagesale 15% off
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.