Electromagnetic compatibility of multimedia equipment - Emission requirements

CISPR 32:2012 International Standard applies to multimedia equipment (MME) having a rated r.m.s. AC or DC supply voltage not exceeding 600 V. Equipment within the scope of CISPR 13 or CISPR 22 is within the scope of this publication. MME intended primarily for professional use is within the scope of this publication. The radiated emission requirements in this standard are not intended to be applicable to the intentional transmissions from a radio transmitter as defined by the ITU, nor to any spurious emissions related to these intentional transmissions. Equipment, for which emission requirements in the frequency range covered by this publication are explicitly formulated in other CISPR publications (except CISPR 13 and CISPR 22), are excluded from the scope of this publication. This document does not contain requirements for in-situ assessment. Such testing is outside the scope of this publication and may not be used to demonstrate compliance with it. This publication covers two classes of MME (Class A and Class B). The objectives of this publication are to establish requirements which provide an adequate level of protection of the radio spectrum, allowing radio services to operate as intended in the frequency range 9 kHz to 400 GHz and to specify procedures to ensure the reproducibility of measurement and the repeatability of results. The contents of corrigendum of March 2012 and August 2012 have been included in this copy.

Compatibilité électromagnétique des équipements multimédia - Exigences d'émission

La CISPR 32:2012 est une Norme Internationale qui s'applique aux équipements multimédia (MME) dont la tension d'alimentation efficace assignée en courant continu ou alternatif ne dépasse pas 600 V. Les équipements couverts par la CISPR 13 ou la CISPR 22 entrent dans le domaine d'application de cette publication. Les MME principalement destinés à une utilisation professionnelle entrent dans le domaine d'application de cette publication. Les exigences relatives aux émissions rayonnées stipulées dans la présente norme ne s'appliquent ni aux transmissions intentionnelles à partir d'un radio transmetteur comme défini par l'UIT, ni aux émissions liées à ces transmissions intentionnelles. Les équipements pour lesquels les exigences d'émission dans la gamme de fréquences couvertes par cette publication sont explicitement formulées dans d'autres publications CISPR (sauf la CISPR 13 et la CISPR 22), sont exclus du domaine d'application de cette publication. Le présent document ne contient pas d'exigences pour les évaluations in situ. Ce type d'essai est en dehors du domaine d'application de cette publication et n'est pas supposé être utilisé pour en démontrer la conformité. Cette publication couvre deux classes de MME (Classe A et Classe B). Les objectifs de cette publication sont d'établir des exigences qui fournissent un niveau suffisant de protection du spectre radio, permettant ainsi aux services radio d'opérer comme prévu dans la gamme de fréquences 9 kHz - 400 GHz et de spécifier les méthodes pour garantir la reproductibilité des mesures et la répétabilité des résultats. Le contenu des corrigendum de mars 2012 et août 2012 a été pris en considération dans cet exemplaire.

General Information

Status
Published
Publication Date
29-Jan-2012
Current Stage
DELPUB - Deleted Publication
Completion Date
31-Mar-2015
Ref Project

Relations

Buy Standard

Standard
CISPR 32:2012 - Electromagnetic compatibility of multimedia equipment - Emission requirements Released:1/30/2012
English and French language
166 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


CISPR 32 ®
Edition 1.0 2012-01
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
INTERNATIONAL SPECIAL COMMITTEE ON RADIO INTERFERENCE
COMITÉ INTERNATIONAL SPÉCIAL DES PERTURBATIONS RADIOÉLECTRIQUES

Electromagnetic compatibility of multimedia equipment –
Emission requirements
Compatibilité électromagnétique des équipements multimédia –
Exigences d’émission
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les
microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

Useful links:
IEC publications search - www.iec.ch/searchpub Electropedia - www.electropedia.org
The advanced search enables you to find IEC publications The world's leading online dictionary of electronic and
by a variety of criteria (reference number, text, technical electrical terms containing more than 30 000 terms and
committee,…). definitions in English and French, with equivalent terms in
It also gives information on projects, replaced and additional languages. Also known as the International
withdrawn publications. Electrotechnical Vocabulary (IEV) on-line.

IEC Just Published - webstore.iec.ch/justpublished Customer Service Centre - webstore.iec.ch/csc
Stay up to date on all new IEC publications. Just Published If you wish to give us your feedback on this publication
details all new publications released. Available on-line and or need further assistance, please contact the
also once a month by email. Customer Service Centre: csc@iec.ch.

A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.

Liens utiles:
Recherche de publications CEI - www.iec.ch/searchpub Electropedia - www.electropedia.org
La recherche avancée vous permet de trouver des Le premier dictionnaire en ligne au monde de termes
publications CEI en utilisant différents critères (numéro de électroniques et électriques. Il contient plus de 30 000
référence, texte, comité d’études,…). termes et définitions en anglais et en français, ainsi que
Elle donne aussi des informations sur les projets et les les termes équivalents dans les langues additionnelles.
publications remplacées ou retirées. Egalement appelé Vocabulaire Electrotechnique
International (VEI) en ligne.
Just Published CEI - webstore.iec.ch/justpublished
Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications de la CEI.
Just Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur
Disponible en ligne et aussi une fois par mois par email. cette publication ou si vous avez des questions
contactez-nous: csc@iec.ch.
CISPR 32 ®
Edition 1.0 2012-01
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
INTERNATIONAL SPECIAL COMMITTEE ON RADIO INTERFERENCE

COMITÉ INTERNATIONAL SPÉCIAL DES PERTURBATIONS RADIOÉLECTRIQUES

Electromagnetic compatibility of multimedia equipment –

Emission requirements
Compatibilité électromagnétique des équipements multimédia –

Exigences d’émission
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX XC
ICS 33.100.10 ISBN 978-2-88912-884-6

– 2 – CISPR 32  IEC:2012
CONTENTS
FOREWORD . 5
1 Scope . 7
2 Normative references . 7
3 Terms, definitions and abbreviations . 8
3.1 Terms and definitions . 8
3.2 Abbreviations . 12
4 Classification of equipment . 14
5 Requirements . 14
6 Measurements . 14
6.1 General . 14
6.2 Host systems and modular EUT . 15
6.3 Measurement procedure . 16
7 Equipment documentation . 16
8 Applicability . 16
9 Test report. 17
10 Compliance with this publication . 18
11 Measurement uncertainty . 18
Annex A (normative) Requirements . 19
Annex B (normative) Exercising the EUT during measurement and test signal
specifications . 27
Annex C (normative) Measurement procedures, instrumentation and supporting
information. 32
Annex D (normative) Arrangement of EUT, local AE and associated cabling . 46
Annex E (informative) Prescan measurements . 61
Annex F (informative) Test report contents summary . 62
Annex G (informative) Support information for the measurement procedures defined in
C.4.1.1 . 63
Bibliography . 79

Figure 1 – Examples of ports . 11
Figure 2 – Example of a host system with different types of modules . 15
Figure A.1 – Graphical representation of the limits for the AC mains power port defined
in Table A.9 . 19
Figure C.1 – Measurement distance . 33
Figure C.2 – Boundary of EUT, Local AE and associated cabling . 34
Figure C.3 – Decision tree for using different detectors with quasi peak and average
limits . 35
Figure C.4 – Decision tree for using different detectors with peak and average limits . 36
Figure C.5 – Decision tree for using different detectors with a quasi-peak limit . 36
Figure C.6 – Calibration fixture . 43
Figure C.7 – Circuit arrangement for measurement of emission voltages at TV/FM
broadcast receiver tuner ports . 44
Figure C.8 – Circuit arrangement for the measurement of the wanted signal and
emission voltage at the RF modulator output port of an EUT . 45

CISPR 32  IEC:2012 – 3 –
Figure D.1 – Example measurement arrangement for table-top EUT (Conducted and
radiated emission) (Top view) . 52
Figure D.2 – Example measurement arrangement for table-top EUT (Conducted
emission measurement – alternative 1) . 53
Figure D.3 – Example measurement arrangement for table-top EUT (Conducted
emission measurement – alternative 2) . 54
Figure D.4 – Example measurement arrangement for table-top EUT measuring in
accordance with C.4.1.6.4. 55
Figure D.5 – Example measurement arrangement for table-top EUT (Conducted
emission measurement – alternative 2, showing AAN position) . 56
Figure D.6 – Example measurement arrangement for floor standing EUT (Conducted
emission measurement) . 57
Figure D.7 – Example measurement arrangement for combinations of EUT (Conducted
emission measurement) . 58
Figure D.8 – Example measurement arrangement for table-top EUT (Radiated
emission measurement) . 58
Figure D.9 – Example measurement arrangement for floor standing EUT (Radiated
emission measurement) . 59
Figure D.10 – Example measurement arrangement for combinations of EUT (Radiated
emission measurement) . 60
Figure G.1 – Example AAN for use with unscreened single balanced pairs . 63
Figure G.2 – Example AAN with high LCL for use with either one or two unscreened
balanced pairs . 64
Figure G.3 – Example AAN with high LCL for use with one, two, three, or four
unscreened balanced pairs . 65
Figure G.4 – Example AAN, including a 50 Ω source matching network at the voltage
measuring port, for use with two unscreened balanced pairs . 66
Figure G.5 – Example AAN for use with two unscreened balanced pairs . 67
Figure G.6 – Example AAN, including a 50 Ω source matching network at the voltage
measuring port, for use with four unscreened balanced pairs . 68
Figure G.7 – Example AAN for use with four unscreened balanced pairs . 69
Figure G.8 – Example AAN for use with coaxial cables, employing an internal common
mode choke created by bifilar winding an insulated centre-conductor wire and an
insulated screen-conductor wire on a common magnetic core (for example, a ferrite
toroid) . 70
Figure G.9 – Example AAN for use with coaxial cables, employing an internal common
mode choke created by miniature coaxial cable (miniature semi-rigid solid copper
screen or miniature double-braided screen coaxial cable) wound on ferrite toroids . 70
Figure G.10 – Example AAN for use with mu
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.