IEC 62255-3:2005

Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 3: Filled cables - Sectional specification

is applicable to filled cables having a metallic screen over the cable core, a polyethylene jacket, copper conductors, and solid or cellular insulation. These cables are typically available in 6 to 300 pair.

Câbles multiconducteurs à paires symétriques et quartes pour transmissions numériques large bande (réseau d'accès télécommunication numérique à haut débit) - Câbles pour installations extérieures - Partie 3: Câbles remplis - Spécification intermédiaire

est applicable à des câbles remplis ayant un écran métallique sur l'âme du câble, une gaine polyéthylène, des conducteurs cuivre et une enveloppe isolante massive ou cellulaire. Ces câbles sont disponibles typiquement de 6 à 300 paires.

General Information

• Status: Published
• Publication Date: 22-Jun-2005
• ICS: 01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
• ICS: 33.120.20 - Wires and symmetrical cables
• Technical Committee: SC 46C - Wires and symmetric cables
• Drafting Committee: MT 1 - TC 46/SC 46C/MT 1
• Current Stage: PPUB - Publication issued
• Start Date: 31-Aug-2005
• Completion Date: 23-Jun-2005

Standards Content (Sample)

INTERNATIONAL IEC
STANDARD 62255-3
First edition
2005-06
Multicore and symmetrical pair/quad cables
for broadband digital communications
(high bit rate digital access telecommunication
networks) – Outside plant cables –
Part 3:
Filled cables – Sectional specification

Reference number
Publication numbering
As from 1 January 1997 all IEC publications are issued with a designation in the

60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1.

Consolidated editions
The IEC is now publishing consolidated versions of its publications. For example,

edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the

base publication incorporating amendment 1 and the base publication incorporating

amendments 1 and 2.
Further information on IEC publications
The technical content of IEC publications is kept under constant review by the IEC,
thus ensuring that the content reflects current technology. Information relating to
this publication, including its validity, is available in the IEC Catalogue of
publications (see below) in addition to new editions, amendments and corrigenda.
Information on the subjects under consideration and work in progress undertaken
by the technical committee which has prepared this publication, as well as the list
of publications issued, is also available from the following:
• IEC Web Site (www.iec.ch)
• Catalogue of IEC publications
The on-line catalogue on the IEC web site (www.iec.ch/searchpub) enables you to
search by a variety of criteria including text searches, technical committees
and date of publication. On-line information is also available on recently issued
publications, withdrawn and replaced publications, as well as corrigenda.
• IEC Just Published
This summary of recently issued publications (www.iec.ch/online_news/ justpub)
is also available by email. Please contact the Customer Service Centre (see
below) for further information.
• Customer Service Centre
If you have any questions regarding this publication or need further assistance,
please contact the Customer Service Centre:

Email: [e-mail]
Tel: [phone]
Fax: [phone]
INTERNATIONAL IEC
STANDARD 62255-3
First edition
2005-06
Multicore and symmetrical pair/quad cables
for broadband digital communications
(high bit rate digital access telecommunication
networks) – Outside plant cables –
Part 3:
Filled cables – Sectional specification

 IEC 2005  Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale P
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue

– 2 – 62255-3  IEC:2005(E)
CONTENTS
FOREWORD.3

Scope.5
2 Normative references.5

3 Terms and definitions .5

4 Installation considerations.5

5 Materials and cable construction .6

5.1 General remarks.6
5.2 Cable construction.6
5.3 Conductor.6
5.4 Insulation.6
5.5 Colour code.6
5.6 Cable element .6
5.7 Cable make-up .6
5.8 Filling compound .6
5.9 Flooding compound .7
5.10 Screening of the cable core .7
5.11 Sheath.7
5.12 Rip-cord .8
5.13 Colour of the sheath .8
5.14 Strength members .8
5.15 Identification.8
5.16 Packaging of the finished cable.8
6 Characteristics and requirements.8
6.1 Electrical requirements .8
6.2 Transmission requirements.10
6.3 Mechanical and dimensional characteristics and requirements of the cable .12
6.4 Environmental requirements .14
7 Introduction to the blank detail specification .15

Table 1 – Conductor resistance .8
Table 2 – Test voltages .9

Table 3 – Test Voltages .9
Table 4 – Attenuation coefficients.11
Table 5 – Values of PSNEXT(1) .11
Table 6 – Values of PSELFEXT(1).12
Table 7 – Return loss .12

62255-3  IEC:2005(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION

____________
MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES

FOR BROADBAND DIGITAL COMMUNICATIONS

(HIGH BIT RATE DIGITAL ACCESS TELECOMMUNICATION

NETWORKS) – OUTSIDE PLANT CABLES –

Part 3: Filled cables – Sectional specification

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all
national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-
operation on all questions concerning standardization in the electrical and electronic fields. To this end and in
addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in
this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also
participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in
accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all interested
IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between any
IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment
declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or other
damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising
out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.

International Standard IEC 62255-3 has been prepared by subcommittee 46C: Wires and
symmetric cables, of IEC technical committee 46: Cables, wires, waveguides, r.f. connectors, r.f.
and microwave passive components and accessories.
The text of this standard is based on the following documents:
FDIS Report on voting
46C/716/FDIS 46C/731/RVD
Full information on the voting for the approval of this standard can be found in the report on voting
indicated in the above table.
This standard is to be read in conjunction with IEC 62255-1.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.

– 4 – 62255-3  IEC:2005(E)
IEC 62255 consists of the following parts, under the general title Multicore and symmetrical

pair/quad cables for broadband digital communications (high bit rate digital access

telecommunications networks) – Outside plant cables:

Part 1: Generic specification

Part 2: Unfilled cables – Sectional specification

Part 2-1: Unfilled cables – Blank detail specification

Part 3: Filled cables – Sectional specification

Part 3-1: Filled cables – Blank detail specification

Part 4: Aerial drop cables – Sectional specification

Part 4-1: Aerial drop cables – Blank detail specification
Part 5: Filled drop cables – Sectional specification
Part 5-1: Filled drop cables – Blank detail specification

The committee has decided that the contents of this publication will remain unchanged until the
maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.

62255-3  IEC:2005(E) – 5 –
MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES

FOR BROADBAND DIGITAL COMMUNICATIONS

(HIGH BIT RATE DIGITAL ACCESS TELECOMMUNICATION

NETWORKS) – OUTSIDE PLANT CABLES –

Part 3: Filled cables – Sectional specification

1 Scope
This sectional specification relates to IEC 62255-1.
This standard is applicable to filled cables having a metallic screen over the cable core, a
polyethylene jacket, copper conductors, and solid or cellular insulation. These cables are typically
available in 6 to 300 pair.
These cables are suitable for direct burial, installation into ducts, or installed aerially by lashing to
a support strand. They may also be self-supporting by incorporation of an integral suspension
strand.
The cables covered by this specification are differentiated by bandwidth and are classified by
having a maximum reference frequency of 30 MHz, 60 MHz, or 100 MHz.
2 Normative references
The following referenced documents are indispensable for the application of this document. For
dated references, only the edition cited applies. For undated references, the latest edition of the
referenced document (including any amendments) applies.
IEC 60304, Standard colours for insulation for low-frequency cables and wires
IEC 60708-1, Low-frequency cables with polyolefin insulation and moisture barrier polyolefin
sheath – Part 1: General design details and requirements
IEC 62255-1, Multicore and symmetrical pair/quad cables for broadband digital communications
(high bit rate digital access telecommunication networks) – Outside plant cables – Part 1: Generic
specification
IEC 62255-3-1, Multicore and symmetrical pair/q
...

IEC 62255-3
Edition 1.0 2005-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Multicore and symmetrical pair/quad cables for broadband digital
communications (high bit rate digital access telecommunication networks) –
Outside plant cables –
Part 3: Filled cables – Sectional specification

Câbles multiconducteurs à paires symétriques et quartes pour transmissions
numériques large bande (réseau d’accès télécommunications numériques à haut
débit) – Câbles pour installations extérieures –
Partie 3: Câbles remplis – Spécification intermédiaire
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or
IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: [e-mail]
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: [e-mail]
Tel.: [phone]
Fax: [phone]
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
ƒ Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
ƒ Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
ƒ Electropedia: www.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
ƒ Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: [e-mail]
Tél.: [phone]
Fax: [phone]
IEC 62255-3
Edition 1.0 2005-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Multicore and symmetrical pair/quad cables for broadband digital
communications (high bit rate digital access telecommunication networks) –
Outside plant cables –
Part 3: Filled cables – Sectional specification

Câbles multiconducteurs à paires symétriques et quartes pour transmissions
numériques large bande (réseau d’accès télécommunications numériques à
haut débit) – Câbles pour installations extérieures –
Partie 3: Câbles remplis – Spécification intermédiaire

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
Q
CODE PRIX
ICS 33.120.20 ISBN 2-8318-8433-0
– 2 – 62255-3 © CEI:2005
SOMMAIRE
AVANT-PROPOS.4

1 Domaine d’application .8
2 Références normatives.8
3 Termes et définitions .8
4 Considérations d’installation.8
5 Matériaux et construction du câble .10
5.1 Remarques générales .10
5.2 Construction du câble.10
5.3 Conducteur .10
5.4 Enveloppe isolante .10
5.5 Code de couleurs .10
5.6 Elément de câblage.10
5.7 Constitution du câble.10
5.8 Matériau de remplissage .12
5.9 Matériau d’enrobage .12
5.10 Ecran sur l’âme du câble .12
5.11 Gaine .14
5.12 Filin de déchirement .14
5.13 Couleur de la gaine .14
5.14 Renfort de traction.14
5.15 Identification.14
5.16 Emballage du câble terminé .14
6 Caractéristiques et exigences.14
6.1 Caractéristiques et exigences électriques.14
6.2 Caractéristiques et exigences de transmission .20
6.3 Caractéristiques et exigences mécaniques et dimensionnelles du câble .24
6.4 Caractéristiques et exigences d’environnement .28
7 Introduction à la spécification particulière cadre .31

Tableau 1 – Résistance du conducteur. .16
Tableau 2 – Tension d’essai .16
Tableau 3 – Tension d’essai .18
Tableau 4 – Coefficients d’affaiblissement .20
Tableau 5 – Valeurs de PSNEXT(1) .22
Tableau 6 – Valeurs de PSELFEXT(1) .22
Tableau 7 – Affaiblissement de réflexion.24

62255-3 © IEC:2005 – 3 –
CONTENTS
FOREWORD.5

1 Scope.9
2 Normative references .9
3 Terms and definitions .9
4 Installation considerations .9
5 Materials and cable construction .11
5.1 General remarks.11
5.2 Cable construction .11
5.3 Conductor .11
5.4 Insulation .11
5.5 Colour code.11
5.6 Cable element .11
5.7 Cable make-up .11
5.8 Filling compound .13
5.9 Flooding compound .13
5.10 Screening of the cable core.13
5.11 Sheath .15
5.12 Rip-cord .15
5.13 Colour of the sheath .15
5.14 Strength members .15
5.15 Identification.15
5.16 Packaging of the finished cable .15
6 Characteristics and requirements .15
6.1 Electrical characteristics and requirements.15
6.2 Transmission characteristics and requirements .21
6.3 Mechanical and dimensional characteristics and requirements of the cable .25
6.4 Environmental characteristics and requirements.29
7 Introduction to the blank detail specification .32

Table 1 – Conductor resistance .17
Table 2 – Test voltages.17
Table 3 – Test Voltages .19
Table 4 – Attenuation coefficients .21
Table 5 – Values of PSNEXT(1).23
Table 6 – Values of PSELFEXT(1) .23
Table 7 – Return loss.25

– 4 – 62255-3 © CEI:2005
COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE
____________
CÂBLES MULTICONDUCTEURS À PAIRES SYMÉTRIQUES ET QUARTES
POUR
...