IEC 61881-3:2012
(Main)Railway applications - Rolling stock equipment - Capacitors for power electronics - Part 3: Electric double-layer capacitors
Railway applications - Rolling stock equipment - Capacitors for power electronics - Part 3: Electric double-layer capacitors
IEC 61881-3:2012 applies to d.c. electric double-layer capacitors (cell, module and bank) for power electronics intended to be used on rolling stock. It specifies quality requirements and tests, safety requirements, and describes installation and operation information.
Applications ferroviaires - Matériel roulant - Condensateurs pour électronique de puissance - Partie 3: Condensateurs électriques à double couche
La CEI 61881-3:2012 s'applique aux condensateurs électriques à double couche en courant continu (unité, module et batterie) pour électronique de puissance, destinés à être utilisés sur le matériel roulant. Elle spécifie les exigences relatives à la qualité et les essais, ainsi que les exigences de sécurité, et elle fournit des informations sur l'installation et les conditions de fonctionnement.
General Information
Relations
Buy Standard
Standards Content (Sample)
IEC 61881-3 ®
Edition 1.0 2012-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Railway applications – Rolling stock equipment – Capacitors for power
electronics –
Part 3: Electric double-layer capacitors
Applications ferroviaires – Matériel roulant – Condensateurs pour électronique
de puissance –
Partie 3: Condensateurs électriques à double couche
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les
microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
Useful links:
IEC publications search - www.iec.ch/searchpub Electropedia - www.electropedia.org
The advanced search enables you to find IEC publications The world's leading online dictionary of electronic and
by a variety of criteria (reference number, text, technical electrical terms containing more than 30 000 terms and
committee,…). definitions in English and French, with equivalent terms in
It also gives information on projects, replaced and additional languages. Also known as the International
withdrawn publications. Electrotechnical Vocabulary (IEV) on-line.
IEC Just Published - webstore.iec.ch/justpublished Customer Service Centre - webstore.iec.ch/csc
Stay up to date on all new IEC publications. Just Published If you wish to give us your feedback on this publication
details all new publications released. Available on-line and or need further assistance, please contact the
also once a month by email. Customer Service Centre: csc@iec.ch.
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
Liens utiles:
Recherche de publications CEI - www.iec.ch/searchpub Electropedia - www.electropedia.org
La recherche avancée vous permet de trouver des Le premier dictionnaire en ligne au monde de termes
publications CEI en utilisant différents critères (numéro de électroniques et électriques. Il contient plus de 30 000
référence, texte, comité d’études,…). termes et définitions en anglais et en français, ainsi que
Elle donne aussi des informations sur les projets et les les termes équivalents dans les langues additionnelles.
publications remplacées ou retirées. Egalement appelé Vocabulaire Electrotechnique
International (VEI) en ligne.
Just Published CEI - webstore.iec.ch/justpublished
Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications de la CEI.
Just Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur
Disponible en ligne et aussi une fois par mois par email. cette publication ou si vous avez des questions
contactez-nous: csc@iec.ch.
IEC 61881-3 ®
Edition 1.0 2012-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Railway applications – Rolling stock equipment – Capacitors for power
electronics –
Part 3: Electric double-layer capacitors
Applications ferroviaires – Matériel roulant – Condensateurs pour électronique
de puissance –
Partie 3: Condensateurs électriques à double couche
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX U
ICS 45.060 ISBN 978-2-83220-252-4
– 2 – 61881-3 © IEC:2012
CONTENTS
FOREWORD . 5
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 8
4 Service conditions . 10
4.1 Normal service conditions . 10
4.1.1 General . 10
4.1.2 Altitude . 11
4.1.3 Temperature . 11
4.2 Unusual service conditions . 11
5 Quality requirements and tests . 11
5.1 Test requirements . 11
5.1.1 General . 11
5.1.2 Test conditions . 11
5.1.3 Measurement conditions . 12
5.1.4 Voltage treatment . 12
5.1.5 Thermal treatment . 12
5.2 Classification of tests . 12
5.2.1 General . 12
5.2.2 Type tests . 13
5.2.3 Routine tests . 13
5.2.4 Acceptance tests . 13
5.3 Capacitance and internal resistance . 13
5.3.1 Measurement procedure for capacitance and internal resistance . 13
5.3.2 Calculation methods for capacitance and internal resistance . 14
5.3.3 Acceptance criteria of capacitance and internal resistance . 14
5.4 Leakage current and self-discharge . 15
5.4.1 Leakage current . 15
5.4.2 Self-discharge . 15
5.5 Insulation test between terminals and case . 15
5.5.1 Capacitor cell (If applicable (applicable to metal case with terminals)
and if required) . 15
5.5.2 Capacitor module or bank . 16
5.6 Sealing test . 17
5.7 Surge discharge test (under consideration) . 17
5.7.1 General . 17
5.7.2 Preconditioning. 17
5.7.3 Initial measurement . 17
5.7.4 Test method . 17
5.7.5 Post treatment . 17
5.7.6 Final measurement . 17
5.7.7 Acceptance criteria . 18
5.8 Environmental testing . 18
5.8.1 Change of temperature . 18
5.8.2 Damp heat, steady state . 18
5.9 Mechanical tests . 19
61881-3 © IEC:2012 – 3 –
5.9.1 Mechanical tests of terminals . 19
5.9.2 External inspection . 20
5.9.3 Vibration and shocks . 20
5.10 Endurance test . 20
5.10.1 General . 20
5.10.2 Preconditioning. 20
5.10.3 Initial measurements . 20
5.10.4 Test methods . 20
5.10.5 Post treatment . 21
5.10.6 Final measurement . 21
5.10.7 Acceptance criteria . 21
5.11 Endurance cycling test . 21
5.11.1 General . 21
5.11.2 Preconditioning. 21
5.11.3 Initial measurements . 21
5.11.4 Test method . 21
5.11.5 End of test criteria . 22
5.11.6 Post treatment . 22
5.11.7 Final measurement . 22
5.11.8 Acceptance criteria . 22
5.12 Pressure relief test . 22
5.13 Passive flammability . 22
5.14 EMC test . 23
6 Overloads . 23
7 Safety requirements . 23
7.1 Discharge device . 23
7.2 Case connections (grounding) . 23
7.3 Protection of the environment . 23
7.4 Other safety requirements . 24
8 Marking . 24
8.1 Marking of the capacitor .
...
IEC 61881-3 ®
Edition 1.1 2013-09
CONSOLIDATED VERSION
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Railway applications – Rolling stock equipment – Capacitors for power
electronics –
Part 3: Electric double-layer capacitors
Applications ferroviaires – Matériel roulant – Condensateurs pour électronique
de puissance –
Partie 3: Condensateurs électriques à double couche
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform IEC online collection - oc.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always
committee, …). It also gives information on projects, replaced have access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 000 terminological entries in English
details all new publications released. Available online and
and French, with equivalent terms in 18 additional languages.
once a month by email.
Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or
need further assistance, please contact the Customer Service
Centre: sales@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.
Recherche de publications IEC - IEC online collection - oc.iec.ch
webstore.iec.ch/advsearchform Découvrez notre puissant moteur de recherche et consultez
La recherche avancée permet de trouver des publications IEC gratuitement tous les aperçus des publications. Avec un
en utilisant différents critères (numéro de référence, texte, abonnement, vous aurez toujours accès à un contenu à jour
comité d’études, …). Elle donne aussi des informations sur adapté à vos besoins.
les projets et les publications remplacées ou retirées.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
Le premier dictionnaire d'électrotechnologie en ligne au
Restez informé sur les nouvelles publications IEC. Just
monde, avec plus de 22 000 articles terminologiques en
Published détaille les nouvelles publications parues.
anglais et en français, ainsi que les termes équivalents dans
Disponible en ligne et une fois par mois par email.
16 langues additionnelles. Egalement appelé Vocabulaire
Electrotechnique International (IEV) en ligne.
Service Clients - webstore.iec.ch/csc
Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
sales@iec.ch.
IEC 61881-3 ®
Edition 1.1 2013-09
CONSOLIDATED VERSION
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Railway applications – Rolling stock equipment – Capacitors for power
electronics –
Part 3: Electric double-layer capacitors
Applications ferroviaires – Matériel roulant – Condensateurs pour électronique
de puissance –
Partie 3: Condensateurs électriques à double couche
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 45.060 ISBN 978-2-8322-1106-9
IEC 61881-3 ®
Edition 1.1 2013-09
CONSOLIDATED VERSION
REDLINE VERSION
VERSION REDLINE
colour
inside
Railway applications – Rolling stock equipment – Capacitors for power
electronics –
Part 3: Electric double-layer capacitors
Applications ferroviaires – Matériel roulant – Condensateurs pour électronique
de puissance –
Partie 3: Condensateurs électriques à double couche
– 2 – 61881-3 © IEC:2012
+A1:2013
CONTENTS
FOREWORD. 5
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 8
4 Service conditions . 10
4.1 Normal service conditions . 10
4.1.1 General . 10
4.1.2 Altitude . 11
4.1.3 Temperature . 11
4.2 Unusual service conditions . 11
5 Quality requirements and tests . 11
5.1 Test requirements . 11
5.1.1 General . 11
5.1.2 Test conditions . 11
5.1.3 Measurement conditions . 12
5.1.4 Voltage treatment . 12
5.1.5 Thermal treatment . 12
5.2 Classification of tests . 12
5.2.1 General . 12
5.2.2 Type tests . 13
5.2.3 Routine tests . 13
5.2.4 Acceptance tests . 13
5.3 Capacitance and internal resistance . 13
5.3.1 Measurement procedure for capacitance and internal resistance . 13
5.3.2 Calculation methods for capacitance and internal resistance . 14
5.3.3 Acceptance criteria of capacitance and internal resistance . 14
5.4 Leakage current and self-discharge . 15
5.4.1 Leakage current . 15
5.4.2 Self-discharge . 15
5.5 Insulation test between terminals and case . 15
5.5.1 Capacitor cell (If applicable (applicable to metal case with terminals)
and if required) . 15
5.5.2 Capacitor module or bank . 16
5.6 Sealing test . 17
5.7 Surge discharge test (under consideration)Short-circuit test . 17
5.7.1 General . 17
5.7.2 Preconditioning . 17
5.7.3 Initial measurement . 17
5.7.4 Test method . 17
5.7.5 Post treatment . 17
5.7.6 Final measurement . 18
5.7.7 Acceptance criteria . 18
5.8 Environmental testing . 18
5.8.1 Change of temperature . 18
5.8.2 Damp heat, steady state . 19
61881-3 © IEC:2012 – 3 –
+A1:2013
5.9 Mechanical tests . 19
5.9.1 Mechanical tests of terminals . 19
5.9.2 External inspection . 20
5.9.3 Vibration and shocks . 20
5.10 Endurance test . 20
5.10.1 General . 20
5.10.2 Preconditioning . 20
5.10.3 Initial measurements . 20
5.10.4 Test methods . 20
5.10.5 Post treatment . 21
5.10.6 Final measurement . 21
5.10.7 Acceptance criteria . 21
5.11 Endurance cyc ling t e s t . 21
5.11.1 General . 21
5.11.2 Preconditioning . 21
5.11.3 Initial measurements . 21
5.11.4 Test method . 21
5.11.5 End of test criteria . 23
5.11.6 Post treatment . 23
5.11.7 Final measurement . 23
5.11.8 Acceptance criteria . 23
5.12 Pressure relief test . 24
5.13 Passive flammability . 24
5.14 EMC test . 24
6 Overloads .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.