IEC 61375-2-3:2015/COR1:2015
(Corrigendum)Corrigendum 1 - Electronic railway equipment - Train communication network (TCN) - Part 2-3: TCN communication profile
Corrigendum 1 - Electronic railway equipment - Train communication network (TCN) - Part 2-3: TCN communication profile
General Information
Relations
Standards Content (Sample)
IEC 61375-2-3:2015/COR1:2015 – 1 –
IEC 2015
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
IEC 61375-2-3
Edition 1.0 2015-07
Electronic railway equipment – Train communication network (TCN) –
Part 2-3: TCN communication profile
CO RRI G E NDUM 1
Replace th
...
This May Also Interest You
IEC 63190:2023 specifies the characteristics of copper and copper alloy catenary wires for use on overhead contact lines. This document also covers auxiliary catenary wires. It establishes the product characteristics, the test methods, checking procedures to be used with the catenary wires, together with packing, ordering and delivery conditions.
- Standard70 pagesEnglish and French languagesale 15% off
- Standard8 pagesEnglish and French languagesale 15% off
IEC 62590-3-1:2022 specifies the requirements and test methods for electronic power compensators for 1AC traction systems. This equipment is used to improve electric power quality inside the electric traction system and/or at the interface to the 3AC power network, applying power electronics technology.
This document applies to equipment which is installed to achieve one or more of the following objectives as its function(s):
- to mitigate voltage fluctuation;
- to improve power factor;
- to reduce imbalance at the interface to the 3AC power network.
This document applies to equipment with all possible configurations to implement different technical solutions for compensation, but equipment consisting of only passive components is excluded.
- Standard99 pagesEnglish and French languagesale 15% off
IEC 62499:2021 gives rules for testing methods for newly manufactured pantographs contact strips. Not all tests may be relevant to some designs of contact strips. This document excludes tests using a particular pantograph. Additional supplementary tests, out of the scope of this document, may be necessary to determine suitability for a particular application and are by prior agreement between customer and manufacturer.
It is based on EN 50405:2015. This second edition cancels and replaces the first edition published in 2008. This edition includes the following significant technical changes with respect to the previous edition:
a. Title modified;
b. The scope of this standard is changed from carbon contact strips to contact strips;
c. Replacement of several reference standards;
d. Several terms and abbreviated terms are introduced;
- The definitions of metalized contact strip and metal contact strip are introduced according to the metal or carbon content by weight;
- The definitions of contact strip structures and types are introduced;
e. Requirements for data sheets are introduced;
f. Table 1: Schedule of tests and Table 2: Sequence of tests are introduced;
g. the requirements for certain test methods and test acceptance criteria are updated;
h. Test of metal content for metalized contact strip, test of the coefficient of friction, optional test of the impact resistance of the carbon material and optional test of wear properties are added;
- Annex A and Annex B are introduced.
- Standard77 pagesEnglish and French languagesale 15% off
IEC 61375-2-8:2021 applies to all equipment and devices implemented according to IEC 61375-2-3:2015, IEC 61375-2-5:2014 and IEC 61375-3-4:2014, i.e. it covers the procedures to be applied to such equipment and devices when the conformance should be proven. The applicability of this document to a TCN implementation allows for individual conformance checking of the implementation itself, and is a pre-requisite for further interoperability checking between different TCN implementations.
- Standard356 pagesEnglish languagesale 15% off
IEC 62973-4:2021 applies to secondary sealed nickel-metal hydride battery technologies for auxiliary power supply systems used on rolling stock.
This document specifies the requirements of the characteristics and tests for the sealed nickel-metal hydride cells and supplements IEC 62973-1 which applies to any rolling stock types (e.g. light rail vehicles, tramways, streetcars, metros, commuter trains, regional trains, high speed trains, locomotives, etc.). Unless otherwise specified, the requirements of IEC 62973-1 apply. This document also specifies the requirements of the interface between the batteries and the battery chargers. This document is to be used in conjunction with IEC 62675, IEC 63115-1 and IEC 63115-2.
- Standard55 pagesEnglish and French languagesale 15% off
IEC 62973-2:2020 applies to NiCd rechargeable batteries for auxiliary power supply systems used on railway vehicles. It is an extension of IEC 62973-1:2018 which specifies common requirements for all battery technologies of other parts of IEC 62973. Unless otherwise specified, the requirements of IEC 62973-1:2018 apply.
Battery systems described in this document are used in conjunction with charging systems onboard rolling stock, as described in IEC 62973-1:2018. Charging systems (e.g. LVPS, converters, etc.) are excluded from the scope of this document.
This document also specifies the design, operation parameters, safety recommendations, routine and type tests, as well as marking and designation. This document is used in addition to IEC 60623:2017 or IEC 62259:2003 for NiCd Cells.
- Standard34 pagesEnglish languagesale 15% off
- Standard12 pagesEnglish languagesale 15% off
IEC 62505-3-1:2020 is applicable to new low voltage devices for measurement, control and protection which are:
- for indoor or outdoor fixed installations in traction systems, and
- operated in conjunction with high voltage equipment with an AC line voltage and frequency as specified in IEC 60850.
This document also applies to measurement, control and protective devices other than low voltage devices and not covered by a specific railway product standard as far as reasonably possible. Requirements of this document prevail.
This second edition cancels and replaces the first edition published in 2009. This edition includes the following significant technical changes with respect to the previous edition:
- distinguish between requirements and application guides
- include requirements on devices for example control and protection relays not included before;
- remove parts already included in other standards, for example EN 50633 for protection principles, which is intended to become an IEC standard.
- Standard21 pagesEnglish languagesale 15% off
IEC 62505-3-2:2020 is applicable to new current transformers which are:
- intended for use in indoor or outdoor fixed installations in traction systems, and
- operated with an AC line voltage and frequency as specified in IEC 60850.
This second edition cancels and replaces the first edition published in 2009.This edition includes the following significant technical changes with respect to the previous edition :
- this standard was revised to reflect the latest versions of standards referenced and to remove text already included in the IEC 61869 series.
- the structure of the document was adapted to that of IEC 62505‑1 and IEC 62505‑2.
- ratings have been added to provide designations in line with other railway standards, for example IEC 62497.
- test requirements have been detailed to meet operating conditions of railway applications.
- partial discharge voltages have been specified.
- Standard14 pagesEnglish languagesale 15% off
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.