IEC 62841-3-9:2014/COR1:2015

Corrigendum 1 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws

Corrigendum 1 - Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses - Sécurité - Partie 3-9: Exigences particulières pour les scies à onglets transportables

General Information

• Status: Published
• Publication Date: 27-Oct-2015
• ICS: 25.140.20 - Electric tools
• Technical Committee: TC 116 - Safety of motor-operated electric tools
• Current Stage: DELPUB - Deleted Publication
• Completion Date: 14-Feb-2020

Relations

• Corrects: IEC 62841-3-9:2014 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws
• Effective Date: 05-Sep-2023
• Corrected By: IEC 62841-3-9:2014/COR2:2016 - Corrigendum 2 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws
• Effective Date: 05-Sep-2023
• Revised: IEC 62841-3-9:2020 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws
• Effective Date: 05-Sep-2023

Standards Content (Sample)

 IEC 2015
INTERNATIONAL ELECTROTECHNICAL COMMISSION

COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE

____________
IEC 62841-3-9 IEC 62841-3-9
Edition 1.0  2014-08 Edition 1.0  2014-08

ELECTRIC MOTOR-OPERATED HAND-HELD OUTILS ELECTROPORTATIFS A MOTEUR,
TOOLS, TRANSPORTABLE TOOLS AND LAWN OUTILS PORTABLES ET MACHINES POUR
AND GARDEN MACHINERY – SAFETY – JARDINS ET PELOUSES – SECURITE –
Part 3-9: Particular requirements for Partie 3-9: Exigences particulières pour les scies
transportable mitre saws à onglets transportables

CO RRI G E NDUM 1
Corrections to the French version appear after the English text.
Les corrections à la version française sont données après le texte anglais.

18 Abnormal operation
Replace Table 4 with the following:
Table 4 – Required performance levels
Type and purpose of SCF Minimum Performance Level (PL)
Power switch – prevent unwanted switch-on Shall be evaluated using the fault conditions of 18.6.1
without the loss of this SCF
Power switch – provide desired switch-off Shall be evaluated using the fault conditions of 18.6.1
without the loss of this SCF
Provide desired direction of rotation Shall be evaluated using the fault conditions of 18.6.1
without the loss of this SCF
Any electronic control to pass the test of 18.3 c
Over-speed prevention to prevent output speed above c
130 % of rated (no-load) speed
Lock-off function as required by 21.18.2.101 b
Lower guard – prevent unwanted retra
...