IEC 60598-1:2014/ISH1:2016

Interpretation sheet 1 - Luminaires - Part 1: General requirements and tests

Feuille d'interprétation 1 - Luminaires - Partie 1: Exigences générales et essais

General Information

• Status: Published
• Publication Date: 17-May-2016
• ICS: 29.140.40 - Luminaires
• Technical Committee: SC 34D - Luminaires
• Current Stage: DELPUB - Deleted Publication
• Completion Date: 31-Aug-2020

Relations

• Revises: IEC 60598-1:2014 - Luminaires - Part 1: General requirements and tests
• Effective Date: 05-Sep-2023
• Revised: IEC 60598-1:2020 - Luminaires - Part 1: General requirements and tests
• Effective Date: 05-Sep-2023

Standards Content (Sample)

INTERNATIONAL ELECTROTECHNICAL COMMISSION

____________
IEC 60598-1
Edition 8.0  2014-05
LUMINAIRES –
Part 1: General requirements and tests

INTERPRETATION SHEET 1
This interpretation sheet has been prepared by subcommittee 34D: Luminaires, of IEC
technical committee 34: Lamps and related equipment.
The text of this interpretation sheet is based on the following documents:
ISH Report on voting
34D/1197/ISH 34D/1207/RVD
Full information on the voting for the approval of this interpretation sheet can be found in the
report on voting indicated in the above table.

___________
INTRODUCTION (not part of the proposal)
Changes introduced in IEC 60598-1 Ed.8.0 were made urgently to address completely new
designs of LED luminaire that are entering the market. Some further alignment with the
already existing previous requirements of the standard are still needed and this will be
addressed for Amendment 1 to Edition 8 that is now in preparation.
PROPOSAL
To publish Interpretation Sheet on Clause 4.31; Clause 10; Clause 11; Annex M and Annex X
of IEC 60598-1:2014 (Ed. 8.0), Luminaires – Part 1: General requirements and tests, as
follows:
ICS 29.140.40
IEC 60598-1:2014-05/ISH1:2016-05(en-fr)

– 2 – IEC 60598-1:2014/ISH1:2016  IEC 2016

INTERPRETATION SHEET
Clause 4.31; Clause 10; Clause 11; Annex M and Annex X of
IEC 60598-1:2014 (Ed. 8.0), Luminaires – Part 1: General requirements and tests

For insulation requirements between active (current carrying/live) parts and accessible parts,
Table X.1 of Annex X is to be taken as the definitive reference of the required insulation that
is to be provided. Furthermore, the details prescribed by Table X.1 are to be used as the

basis for establishing the ‘working voltage’ that is to be considered for application of the

electric strength tests of Clause 10 and Creepage and Clearance requirements of Clause 11.

COMMISSION ÉLECTROTECHNIQUE INTER
...