IEC 60603-7:2008/AMD1:2011

Amendment 1 - Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors

Amendement 1 - Connecteurs pour équipements électroniques - Partie 7: Spécification particulière pour les fiches et les embases non écrantées à 8 voies

General Information

• Status: Published
• Publication Date: 28-Sep-2011
• ICS: 01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
• ICS: 31.220.01 - Electromechanical components in general
• Technical Committee: SC 48B - Electrical connectors
• Current Stage: DELPUB - Deleted Publication
• Completion Date: 09-Oct-2020

Relations

• Amends: IEC 60603-7:2008 - Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors
• Effective Date: 05-Sep-2023
• Revised: IEC 60603-7:2020 - Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors
• Effective Date: 05-Sep-2023

Standards Content (Sample)

IEC 60603-7 ®
Edition 3.0 2011-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 1
AMENDEMENT 1
Connectors for electronic equipment –
Part 7: Detail specification for 8-way, unshielded, free and fixed connectors

Connecteurs pour équipements électroniques –
Partie 7: Spécification particulière pour les fiches et les embases non écrantées
à 8 voies
IEC 60603-7:2008/A1:2011
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or
IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: [e-mail]
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
 Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
 IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
 Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
 Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: [e-mail]
Tel.: [phone]
Fax: [phone]
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
 Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
 Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
 Electropedia: www.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
 Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: [e-mail]
Tél.: [phone]
Fax: [phone]
IEC 60603-7 ®
Edition 3.0 2011-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 1
AMENDEMENT 1
Connectors for electronic equipment –
Part 7: Detail specification for 8-way, unshielded, free and fixed connectors

Connecteurs pour équipements électroniques –
Partie 7: Spécification particulière pour les fiches et les embases non écrantées
à 8 voies
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE PRICE CODE
E
CODE PRIX
ICS 31.220.01 ISBN 978-2-88912-714-6

– 2 – 60603-7 Amend.1  IEC:2011
FOREWORD
This amendment has been prepared by subcommittee 48B: Connectors, of IEC technical
committee 48: Electromechanical components and mechanical structures for electronic
equipment.
The text of this amendment is based on the following documents:
CDV Report on voting
48B/2145/CDV 48B/2205/RVC
Full information on the voting for the approval of this amendment can be found in the report
on voting indicated in the above table.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the stability date indicated on the IEC web site under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
_____________
60603-7 Amend.1  IEC:2011 – 3 –

In 5.1, replace:
Clearance shall be provided for connector contacts.
By:
The “Go” gauge in Figure 5 is intended to assess the fixed connector minimum aperture width
and height, and shall not be used to assess contact forces. Clearance shall be provided for
connector signal contacts. If connector shield contacts are present, either clearance shall be
provided for these contacts (as long as the minimum aperture width and height are still
assessed) or these contacts, within the connector aperture, shall be removed.

In 5.2, Figure 8, right hand view, replace:
AC6
By:
AB6
In 6.4.1, replace:
The creepage and clearance distances are given as operating characteristics of mated
connectors.
By:
The creepage and clearance distances in Table 8 are given as operating characteristics of
mated connectors.
rd
In 7.7.2.3, Test phase AP3, 3 column, replace:
See IEC 60068-2-14
By:
11d
...