Road vehicles — Temperature measurement in anthropomorphic test devices — Definition of the temperature sensor locations

ISO 27957:2008 defines the number and the arrangement of temperature measuring points for anthropomorphic test devices (ATDs), in order to ensure that the temperature of the ATD is in accordance with the temperature corridor prescribed by the applied test procedure.

Véhicules routiers — Mesure de la température dans les dispositifs d'essai anthropomorphes — Définitions des positions des capteurs de température

General Information

Status
Withdrawn
Publication Date
28-Jul-2008
Withdrawal Date
28-Jul-2008
Current Stage
9599 - Withdrawal of International Standard
Start Date
23-Apr-2020
Completion Date
23-Apr-2020
Ref Project

RELATIONS

Buy Standard

Technical report
ISO/TR 27957:2008 - Road vehicles -- Temperature measurement in anthropomorphic test devices -- Definition of the temperature sensor locations
English language
7 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (sample)

TECHNICAL ISO/TR
REPORT 27957
First edition
2008-08-01
Road vehicles — Temperature
measurement in anthropomorphic test
devices — Definition of the temperature
sensor locations
Véhicules routiers — Mesure de la température dans les dispositifs
d'essai anthropomorphes — Définitions des positions des capteurs de
température
Reference number
ISO/TR 27957:2008(E)
ISO 2008
---------------------- Page: 1 ----------------------
ISO/TR 27957:2008(E)
PDF disclaimer

This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but

shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In

downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat

accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.

Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation

parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In

the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

COPYRIGHT PROTECTED DOCUMENT
© ISO 2008

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,

electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or

ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2008 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/TR 27957:2008(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies

(ISO member bodies). The work of preparing International Standards is normally carried out through ISO

technical committees. Each member body interested in a subject for which a technical committee has been

established has the right to be represented on that committee. International organizations, governmental and

non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the

International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.

International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.

The main task of technical committees is to prepare International Standards. Draft International Standards

adopted by the technical committees are circulated to the member bodies for voting. Publication as an

International Standard requires approval by at least 75 % of the member bodies casting a vote.

In exceptional circumstances, when a technical committee has collected data of a different kind from that

which is normally published as an International Standard (“state of the art”, for example), it may decide by a

simple majority vote of its participating members to publish a Technical Report. A Technical Report is entirely

informative in nature and does not have to be reviewed until the data it provides are considered to be no

longer valid or useful.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent

rights. ISO shall not be held responsible for identifying any or all such patent rights.

ISO/TR 27957 was prepared by Technical Committee ISO/TC 22, Road vehicles, Subcommittee SC 12,

Passive safety crash protection systems.
© ISO 2008 – All rights reserved iii
---------------------- Page: 3 ----------------------
ISO/TR 27957:2008(E)
Introduction

The temperature sensitivity of dummy components has long been recognized. All dummies used for testing in

accordance with current test procedures have prescribed temperature ranges for certification and testing.

However, the procedure for verifying dummy temperature can vary from one testing facility to another. To

improve the comparability of test data between laboratories, it is considered necessary to define a single

practice for the measurement of dummy temperature.

This Technical Report proposes the number and the arrangement of the temperature measuring points in

anthropomorphic test devices (ATDs). The proposal is based on several studies and is intended to ensure that

the temperature of the ATD is in accordance with the temperature corridor prescribed by the applied test

procedure.
iv © ISO 2008 – All rights reserved
---------------------- Page: 4 ----------------------
TECHNICAL REPORT ISO/TR 27957:2008(E)
Road vehicles — Temperature measurement in
anthropomorphic test devices — Definition of the temperature
sensor locations
1 Scope

This Technical Report defines the number and the arrangement of temperature measuring points for

anthropomorphic test devices (ATDs), in order to ensure that the temperature of the ATD is in accordance

with the temperature corridor prescribed by the applied test procedure.
2 Normative references

The following referenced documents are indispensable for the application of this document. For dated

references, only the edition cited applies. For undated references, the latest edition of the

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.