ISO 5636-1:1984
(Main)Paper and board — Determination of air permeance (medium range) — Part 1: General method
Paper and board — Determination of air permeance (medium range) — Part 1: General method
Specfies basic requirements for apperatus and general operating procedures for determining the air permeance of paper and board in the medium air permeance range, and is applicable to papers and boards having air permeances between 1 x 10- and 1 x 10 m/(Pa.s), being unsuitable for rough-surface papers such as creped and corrugared papers, which cannot be securely clamped to avoid leakage.
Papier et carton — Détermination de la perméabilité à l'air (valeur moyenne) — Partie 1: Méthode générale
Papir, karton in lepenka - Določanje prepustnosti zraka (srednje območje) - 1. del: Splošna metoda
General Information
Buy Standard
Standards Content (Sample)
5636/ 1
International Standard
INTERNATIONAL ORGANIZATION FOR STANDARDIZATlONWvlE~~YHAPO~HAR OPTAHH3AUMR l-l0 CTAH~APTH3AL&lM@ORGANlSATlON INTERNATIONALE DE NORMALISATION
Paper and board
- Determination of air permeance
(medium range) -
Part 1 I General method
Papier et carton - LWermination de la perm~abilih! ;i Lair fvaleur moyenne) - Partie I : M&hode g&n&ale
First edition - 1984-04-15
iz
-
UDC 676.3/.7 I 620.16529
Ref: No. IS0 5636/14984(E)
e
Descriptors : papers, paperboards, tests, determination, air permeability, test equipment.
Price based on 4 pages
---------------------- Page: 1 ----------------------
Foreword
IS0 (the International Organization for Standardization) is a worldwide federation of
national standards bodies (IS0 member bodies). The work of developing International
Standards is carried out through IS0 technical committees. Every member body
interested in a subject for which a technical committee has been authorized has the
right to be represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the IS0 Council.
International Standard IS0 5636/l was developed by Technical Committee ISO/TC 6,
Paper, board and pulps, and was circulated to the member bodies in March 1983.
It has been approved by the member bodies of the following countries :
Australia
Hungary South Africa, Rep. of
Austria
India Spain
Belgium Iran Sweden .
Bulgaria Italy Switzerland
Brazil Kenya Tanzania
Canada Korea, Rep. of Turkey
China Netherlands United Kingdom
Czechoslovakia New Zealand USA
Egypt, Arab Rep. of Norway USSR
Finland Poland Venezuela
Germany, F. R. Romania
No member body expressed disapproval of the document
0 International Organization for Standardization, 1984
Printed in Switzerland
---------------------- Page: 2 ----------------------
INTERNATIONAL STANDARD IS0 5636/l-1984 (E)
Paper and board - Determination of air permeance
(medium range) -
Part 1 I General method
0 Introduction 4 Definition
This International Standard specifies methods of measuring the For the purpose of this International Standard, the following
rate of flow of air through unit area of a sheet of paper or definition applies.
board, under unit pressure difference. The measurements may
be made with any apparatus which complies with the specifica-
air permeance : The mean flow of air through unit area under
tions given in this International Standard.
unit pressure difference in unit time, under specified condi-
tions.
This part of IS0 5636 specifies basic requirements for the ap-
paratus and general operating procedures. Other parts specify
detailed requirements and operating procedures applicable to
It is expressed in micrometres per Pascal second
specific types of apparatus.
[l mV(m2aPas) = 1 pm/(Pa-91.
IS0 5636/2 describes the Schopper apparatus and operating
procedures. 1)
5. Principle
IS0 5636/3 describes the Bendtsen apparatus and operating
procedures.2)
Clamping a test piece between two circular gaskets or between
a circular gasket and an annular flat surface, the dimensions
Other parts of this International Standard may be prepared
being known in either case, with the absolute air pressure on
later, provided that the apparatus complies with the specifica-
one side of the test area of the test piece equivalent to at-
tions given in this part of IS0 5636.3)
mospheric pressure and the difference in pressure between the
two sides of the test piece maintained at a small but substan-
tially constant value during the test. Determination of flow of
1 Scope
air through the test area in a specified time.
This part of IS0 5636 specifies basic requirements for ap-
NOTE - In the case of the Gurley tester, the applied pressure varies
paratus and general operating procedures for determining the
during the test due to the buoyancy effect of the cylinder, but such
air permeance of paper and board in the medium air permeance
variation is reproducible.
range.
2 Field of application
6 Apparatus
The method is applicable to papers and boards having air per-
The apparatus shall comply with the detailed requirements
meances between 1 x 10-Z and 1 x 102 pm/(Pas). The
given in the appropriate parts of this International Standard. It
method is unsuitable for rough surfaced papers and boards,
is essential, however, that each type of apparatus meets the
such as creped and corrugated papers, which cannot be
following general requirements :
securely clamped to avoid leakage.
a) the volume shall be measurable to an accuracy of
3 References + 2 % of the measured value, and the time shall be measur-
able to an accuracy of + 1 % of the measured value; or
IS0 106, Paper and board - Sampling for testing.
b) the rate of flow shall be measurable to an accuracy of
IS0 107, Paper and board - Conditioning of samples. + 5 % of the measured value.
1) IS0 5636/2, Paper and board - Determination of air permeance (medium range) - Part 2 : Schopper m&hod.
2) IS0 563613, Paper and board - Determination of air permeance (medium range) - Part 3 : Bendtsen method.
3) Other instruments which may be considered include the Potts, Sheffield, Gurley and SCAN instruments.
1
---------------------- Page: 3 ----------------------
IS0 5636/l-1984 (E)
The initial pressure difference’) over the test piece shall be
a) to calibrate accurately the pressure difference to be ap-
known to & 2 % and shall not deviate by more than 5 % plied across the test piece;
during the measurement. It shall lie between 0,7 and 3,0 kPa.
b) to ensure steady operation of the device controlling the
The test piece shall be clamped with an airtight gasket on the flow of air immediately before and during the time the deter-
pressurized side of the test piece. This gasket sha
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Papier et carton -- Détermination de la perméabilité à l'air (valeur moyenne) -- Partie 1: Méthode généralePaper and board -- Determination of air permeance (medium range) -- Part 1: General method85.060Papir, karton in lepenkaPaper and boardICS:Ta slovenski standard je istoveten z:ISO 5636-1:1984SIST ISO 5636-1:1995en01-junij-1995SIST ISO 5636-1:1995SLOVENSKI
STANDARD
SIST ISO 5636-1:1995
International Standard 5636/ 1 INTERNATIONAL ORGANIZATION FOR STANDARDIZATlONWvlE~~YHAPO~HAR OPTAHH3AUMR l-l0 CTAH~APTH3AL&lM@ORGANlSATlON INTERNATIONALE DE NORMALISATION Paper and board - Determination of air permeance (medium range) - Part 1 I General method Papier et carton - LWermination de la perm~abilih! ;i Lair fvaleur moyenne) - Partie I : M&hode g&n&ale First edition - 1984-04-15 iz - e UDC 676.3/.7 I 620.16529 Ref: No. IS0 5636/14984(E) Descriptors : papers, paperboards, tests, determination, air permeability, test equipment. Price based on 4 pages SIST ISO 5636-1:1995
Foreword IS0 (the International Organization for Standardization) is a worldwide federation of national standards bodies (IS0 member bodies). The work of developing International Standards is carried out through IS0 technical committees. Every member body interested in a subject for which a technical committee has been authorized has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the IS0 Council. International Standard IS0 5636/l was developed by Technical Committee ISO/TC 6, Paper, board and pulps, and was circulated to the member bodies in March 1983. It has been approved by the member bodies of the following countries : Australia Austria Belgium Bulgaria Brazil Canada China Czechoslovakia Egypt, Arab Rep. of Finland Germany, F. R. Hungary India Iran Italy Kenya Korea, Rep. of Netherlands New Zealand Norway Poland Romania No member body expressed disapproval of the document South Africa, Rep. of Spain Sweden . Switzerland Tanzania Turkey United Kingdom USA USSR Venezuela 0 International Organization for Standardization, 1984 Printed in Switzerland SIST ISO 5636-1:1995
INTERNATIONAL STANDARD IS0 5636/l-1984 (E) Paper and board - Determination of air permeance (medium range) - Part 1 I General method 0 Introduction This International Standard specifies methods of measuring the rate of flow of air through unit area of a sheet of paper or board, under unit pressure difference. The measurements may be made with any apparatus which complies with the specifica- tions given in this International Standard. This part of IS0 5636 specifies basic requirements for the ap- paratus and general operating procedures. Other parts specify detailed requirements and operating procedures applicable to specific types of apparatus. IS0 5636/2 describes the Schopper apparatus and operating procedures. 1) IS0 5636/3 describes the Bendtsen apparatus and operating procedures.2) Other parts of this International Standard may be prepared later, provided that the apparatus complies with the specifica- tions given in this part of IS0 5636.3) 1 Scope This part of IS0 5636 specifies basic requirements for ap- paratus and general operating procedures for determining the air permeance of paper and board in the medium air permeance range. 2 Field of application The method is applicable to papers and boards having air per- meances between 1 x 10-Z and 1 x 102 pm/(Pas). The method is unsuitable for rough surfaced papers and boards, such as creped and corrugated papers, which cannot be securely clamped to avoid leakage. 3 References IS0 106, Paper and board - Sampling for testing. IS0 107, Paper and board - Conditioning of samples. 4 Definition For the purpose of this International Standard, the following definition applies. air permeance : The mean flow of air through unit area under unit pressure difference in unit time, under specified condi- tions. It is expressed in micrometres per Pascal second [l mV(m2aPas) = 1 pm/(Pa-91. 5. Principle Clamping a test piece between two circular gaskets or between a circular gasket and an annular flat surface, the dimensions being known in either case, with the absolute air pressure on one side of the test area of the test piece equivalent to at- mospheric pressure and the difference in pressure between the two sides of the test piece maintained at a small but substan- tially constant value during the test. Determination of flow of air through the test area in a specified time. NOTE - In the case of the Gurley tester, the applied pressure varies during the test due to the buoyancy effect of the cylinder, but such variation is reproducible. 6 Apparatus The apparatus shall comply with the detailed requirements given in the appropriate parts of this International Standard. It is essential, however, that each type of apparatus meets the following general requirements : a) the volume shall be measurable to an accuracy of + 2 % of the measured value, and the time shall be measur- able to an accuracy of + 1 % of the measured value; or b) the rate of flow shall be measurable to an accuracy of + 5 % of the measured value. 1) IS0 5636/2, Paper and board - Determination of air permeance (medium range) - Part 2 : Schopper m&hod. 2) IS0 563613, Paper and board - Determination of air permeance (medium range) - Part 3 : Bendtsen method. 3) Other instruments which may be considered include the Potts, Sheffield, Gurley and SCAN instruments. 1 SIST ISO 5636-1:1995
IS0 5636/l-1984 (E) The initial pressure difference’) over the test piece shall be known to & 2 % and shall not deviate by more than 5 % during the measurement. It sh
...
563611
Norme internationale
INTERNATIONAL ORGANIZATION FOR STANDARDlZATION.ME)YHAPO~HAR OPTAHH3A~MR fI0 CTAH~APTM3AUMM.ORGANISA~ION INTERNATIONALE DE NORMALISATION
Détermination de la perméabilité à
Papier et carton -
Vair (valeur moyenne) -
Partie 1 : Méthode générale
Determination of air permeance (medium rangel - Part 7 : General method
Paper and board -
Première édition - 1964-04-15
CDU 676.3/.7 : 620.165.29 Réf. no : ISO 5636/1-1964 (FI
Descripteurs : papier, carton, essai, détermination, perméabilité à l’air, matériel d’essai.
Prix basé sur 4 pages
---------------------- Page: 1 ----------------------
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I’ISO). L’élaboration
des Normes internationales est confiée aux comités techniques de I’ISO. Chaque
comité membre intéressé par une étude a le droit de faire partie du comité technique
correspondant. Les organisations internationales, gouvernementales et non gouverne-
mentales, en liaison avec I’ISO, participent également aux travaux.
La Norme internationale ISO 5636/1 a été élaborée par le comité technique ISO/TC 6,
Papiers, cartons et pâtes, et a été soumise aux comités membres en mars 1983.
Les comités membres des pays suivants l’ont approuvée :
Afrique du Sud, Rép. d’ Espagne Roumanie
Allemagne, R.F.
Finlande Royaume-Uni
Australie Hongrie Suède
Autriche
Inde Suisse
Belgique Iran Tanzanie
Bulgarie Tchécoslovaquie
Italie
Brésil Kenya Turquie
Canada Norvège
URSS
Chine Nouvelle-Zélande USA
Corée, Rép. de Pays- Bas Venezuela
Egypte, Rép. arabe d’ Pologne
Aucun comité membre ne l’a désapprouvée.
0
0 Organisation internationsle de normalisation, 1984
Imprimé en Suisse
---------------------- Page: 2 ----------------------
NORME INTERNATIONALE ISO 5636/1-1984 (F)
Papier et carton - Détermination de la perméabilité à
l’air (valeur moyenne) -
Partie 1 : Méthode générale
La méthode n’est pas applicable aux papiers et cartons dont la
0 Introduction
surface est rugueuse, tels que les papiers crêpés ou ondulés qui
ne peuvent pas être convenablement fixés pour éviter une fuite.
La présente Norme internationale spécifie des méthodes de
mesurage de la vitesse de passage de l’air au travers d’une unité
de surface d’une feuille de papier ou de carton, sous une unite
3 Références
de différence de pression. Le mesurage peut être effectué avec
tout appareil qui répond aux spécifications de la présente
ISO 186, Papier et carton
Norme internationale. - ichan tillonnage pour essais.
ISO 187, Papier et carton - Conditionnement des échan-
La présente partie de I’ISO 5636 donne les spécifications de
tillons.
base des appareils d’essai et des modes opératoires. Les autres
parties donnent les détails nécessaires et les modes opératoires
à suivre applicables aux types d’appareils spécifiés.
4 Définition
L’ISO 5636/2 décrit l’appareil Schopper et les modes opéra-
Dans le cadre de la présente Norme internationale, la définition
toires. 1)
suivante est applicable.
Bendtsen et les modes opé-
L’ISO 5636/3 décrit l’appareil
perm6abilM B l’air : Volume d’air moyen traversant une unité
ratoires.2)
de surface sous une unité de différence de pression par unité de
temps, dans des conditions spécifiées.
D’autres parties de la présente Norme internationale pourront
être préparées ultérieurement, pourvu que les appareils répon-
Elle est exprimée en micromètres par pascal seconde
dent aux spécifications données dans la présente partie de
I’ISO 5636.3) [l ml/(m2~Pas) = 1 pm/(Pa-dl.
5 Principe
1 Objet
Fixation d’une éprouvette entre deux joints circulaires ou entre
La présente partie de I’ISO 5636 donne les spécifications de
un joint circulaire et une surface plane en forme de couronne,
base des appareils et les modes opératoires pour la détermina-
les dimensions étant connues dans chaque cas, la pression d’air
tion de la perméabilité à l’air d’un papier ou d’un carton dans les
absolue sur une face de la zone d’essai de l’éprouvette étant
valeurs moyennes de perméabilité à l’air.
équivalente à la pression atmosphérique et la diffbrence de
pression entre les deux faces de l’éprouvette étant maintenue
tout au long de l’essai, à une valeur faible mais significative et
constante. Mesurage du volume d’air traversant la surface
2 Domaine d’application
d’essai dans un temps spécifié.
La présente méthode est applicable aux papiers et aux cartons
- Dans le cas de l’appareil Gurley, la pression appliquée varie
NOTE
dont la perméabilité à l’air est comprise entre 1 x 10-2 et
pendant l’essai à cause de la poussée du cylindre, mais une telle varia-
1 x 102 pm/(Pas). tion est reproductible.
1) ISO 5636/2, Papier et carton - Détermination de la perméabtlitk à l’air (valeur moyenne) - Partie 2 : Mkthodé Schopper.
2) ISO 5636/3, Papier et carton - Détermhation de la perméabilité à l’air (valeur moyenne) - Partie 3 : Méthode Bendtsen.
3) D’autres appareils qui peuvent être considérés sont les appareils Potts, Sheffield, Gurley et SCAN.
1
---------------------- Page: 3 ----------------------
ISO 5636/1-1984 (FI
10 Mode opératoire
6 Appareillage
Les appareils doivent répondre aux spécifications détaillées
10.1 Atmosphère d’essai
figurant dans les parties appropriées de la présente Norme
internationale. II est cependant essentiel que chaque type
L’essai doit être effectué dans les mêmes conditions atmosphé-
d’appareil réponde aux spécifications générales suivantes :
riques que lors du conditionnement des éprouvettes (voir
chapitre 8).
a) la volume doit être mesurable avec une précision de
+ 2 % de la valeur mesurée, et le temps doit être mesurable
avec une précision de + 1 % de la valeur mesurée; ou
10.2 Détails sur le mesurage
avec
b) la vitesse du courant doit être mesurable une pré-
Les opérations concernant le mesurage de la perméabilité à l’air
cision de $r 5 % de la valeur mesurée.
de chaque éprouvette doivent être effectuées de la manière
indiquée dans la partie appropriée de la présente Norme inter-
La différence de pression initialet) au niveau de l’éprouvette
nationale. Les détails dépendent du type particulier d’appareil
doit être connue à + 2 % et ne doit pas varier de plus de 5 %
utilisé, mais, dans tous les cas, il est essentiel
pendant l’essai. Elle doit se situer ent
...
563611
Norme internationale
INTERNATIONAL ORGANIZATION FOR STANDARDlZATION.ME)YHAPO~HAR OPTAHH3A~MR fI0 CTAH~APTM3AUMM.ORGANISA~ION INTERNATIONALE DE NORMALISATION
Détermination de la perméabilité à
Papier et carton -
Vair (valeur moyenne) -
Partie 1 : Méthode générale
Determination of air permeance (medium rangel - Part 7 : General method
Paper and board -
Première édition - 1964-04-15
CDU 676.3/.7 : 620.165.29 Réf. no : ISO 5636/1-1964 (FI
Descripteurs : papier, carton, essai, détermination, perméabilité à l’air, matériel d’essai.
Prix basé sur 4 pages
---------------------- Page: 1 ----------------------
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I’ISO). L’élaboration
des Normes internationales est confiée aux comités techniques de I’ISO. Chaque
comité membre intéressé par une étude a le droit de faire partie du comité technique
correspondant. Les organisations internationales, gouvernementales et non gouverne-
mentales, en liaison avec I’ISO, participent également aux travaux.
La Norme internationale ISO 5636/1 a été élaborée par le comité technique ISO/TC 6,
Papiers, cartons et pâtes, et a été soumise aux comités membres en mars 1983.
Les comités membres des pays suivants l’ont approuvée :
Afrique du Sud, Rép. d’ Espagne Roumanie
Allemagne, R.F.
Finlande Royaume-Uni
Australie Hongrie Suède
Autriche
Inde Suisse
Belgique Iran Tanzanie
Bulgarie Tchécoslovaquie
Italie
Brésil Kenya Turquie
Canada Norvège
URSS
Chine Nouvelle-Zélande USA
Corée, Rép. de Pays- Bas Venezuela
Egypte, Rép. arabe d’ Pologne
Aucun comité membre ne l’a désapprouvée.
0
0 Organisation internationsle de normalisation, 1984
Imprimé en Suisse
---------------------- Page: 2 ----------------------
NORME INTERNATIONALE ISO 5636/1-1984 (F)
Papier et carton - Détermination de la perméabilité à
l’air (valeur moyenne) -
Partie 1 : Méthode générale
La méthode n’est pas applicable aux papiers et cartons dont la
0 Introduction
surface est rugueuse, tels que les papiers crêpés ou ondulés qui
ne peuvent pas être convenablement fixés pour éviter une fuite.
La présente Norme internationale spécifie des méthodes de
mesurage de la vitesse de passage de l’air au travers d’une unité
de surface d’une feuille de papier ou de carton, sous une unite
3 Références
de différence de pression. Le mesurage peut être effectué avec
tout appareil qui répond aux spécifications de la présente
ISO 186, Papier et carton
Norme internationale. - ichan tillonnage pour essais.
ISO 187, Papier et carton - Conditionnement des échan-
La présente partie de I’ISO 5636 donne les spécifications de
tillons.
base des appareils d’essai et des modes opératoires. Les autres
parties donnent les détails nécessaires et les modes opératoires
à suivre applicables aux types d’appareils spécifiés.
4 Définition
L’ISO 5636/2 décrit l’appareil Schopper et les modes opéra-
Dans le cadre de la présente Norme internationale, la définition
toires. 1)
suivante est applicable.
Bendtsen et les modes opé-
L’ISO 5636/3 décrit l’appareil
perm6abilM B l’air : Volume d’air moyen traversant une unité
ratoires.2)
de surface sous une unité de différence de pression par unité de
temps, dans des conditions spécifiées.
D’autres parties de la présente Norme internationale pourront
être préparées ultérieurement, pourvu que les appareils répon-
Elle est exprimée en micromètres par pascal seconde
dent aux spécifications données dans la présente partie de
I’ISO 5636.3) [l ml/(m2~Pas) = 1 pm/(Pa-dl.
5 Principe
1 Objet
Fixation d’une éprouvette entre deux joints circulaires ou entre
La présente partie de I’ISO 5636 donne les spécifications de
un joint circulaire et une surface plane en forme de couronne,
base des appareils et les modes opératoires pour la détermina-
les dimensions étant connues dans chaque cas, la pression d’air
tion de la perméabilité à l’air d’un papier ou d’un carton dans les
absolue sur une face de la zone d’essai de l’éprouvette étant
valeurs moyennes de perméabilité à l’air.
équivalente à la pression atmosphérique et la diffbrence de
pression entre les deux faces de l’éprouvette étant maintenue
tout au long de l’essai, à une valeur faible mais significative et
constante. Mesurage du volume d’air traversant la surface
2 Domaine d’application
d’essai dans un temps spécifié.
La présente méthode est applicable aux papiers et aux cartons
- Dans le cas de l’appareil Gurley, la pression appliquée varie
NOTE
dont la perméabilité à l’air est comprise entre 1 x 10-2 et
pendant l’essai à cause de la poussée du cylindre, mais une telle varia-
1 x 102 pm/(Pas). tion est reproductible.
1) ISO 5636/2, Papier et carton - Détermination de la perméabtlitk à l’air (valeur moyenne) - Partie 2 : Mkthodé Schopper.
2) ISO 5636/3, Papier et carton - Détermhation de la perméabilité à l’air (valeur moyenne) - Partie 3 : Méthode Bendtsen.
3) D’autres appareils qui peuvent être considérés sont les appareils Potts, Sheffield, Gurley et SCAN.
1
---------------------- Page: 3 ----------------------
ISO 5636/1-1984 (FI
10 Mode opératoire
6 Appareillage
Les appareils doivent répondre aux spécifications détaillées
10.1 Atmosphère d’essai
figurant dans les parties appropriées de la présente Norme
internationale. II est cependant essentiel que chaque type
L’essai doit être effectué dans les mêmes conditions atmosphé-
d’appareil réponde aux spécifications générales suivantes :
riques que lors du conditionnement des éprouvettes (voir
chapitre 8).
a) la volume doit être mesurable avec une précision de
+ 2 % de la valeur mesurée, et le temps doit être mesurable
avec une précision de + 1 % de la valeur mesurée; ou
10.2 Détails sur le mesurage
avec
b) la vitesse du courant doit être mesurable une pré-
Les opérations concernant le mesurage de la perméabilité à l’air
cision de $r 5 % de la valeur mesurée.
de chaque éprouvette doivent être effectuées de la manière
indiquée dans la partie appropriée de la présente Norme inter-
La différence de pression initialet) au niveau de l’éprouvette
nationale. Les détails dépendent du type particulier d’appareil
doit être connue à + 2 % et ne doit pas varier de plus de 5 %
utilisé, mais, dans tous les cas, il est essentiel
pendant l’essai. Elle doit se situer ent
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.