This document describes a laboratory test method, using an IGT1-type or a prĂĽfbau2-type printability tester, for the preparation of specimens to evaluate the absorption rate of an ink on a substrate in offset lithography by setting-off the printed surface to an unprinted surface. This method describes testing with an amount of ink simulating either single colour or multi-colour printing. The print and the set-off print (counter print) are made with interval times, between print and set-off, common for the target process. This method evaluates a particular ink and substrate combination. Â 1These materials are available from IGT Testing Systems, www.igt.nl. This information is given for the convenience of the users of this document and does not constitute an endorsement by ISO of the products. Equivalent products may be used if they can be shown to lead to the same results. 2These materials are available from prĂĽfbau, Dr.-Ing. H. DĂĽrner GmbH, www.pruefbau.de. This information is given for the convenience of the users of this document and does not constitute an endorsement by ISO of the products. Equivalent products may be used if they can be shown to lead to the same results.

  • Technical specification
    22 pages
    English language
    sale 15% off
  • Draft
    21 pages
    English language
    sale 15% off

NEN-ISO 15397 specifies the list of relevant properties of paper substrates to be communicated between the paper and printing industries. This International Standard is applicable to papers intended to be printed in rotogravure, cold-set web offset, heat-set web offset, sheet-fed offset, and flexographic printing processes and to proofing substrates. Where multiple methods exist, the preferred procedure and its International Standard are specified. All methods for measuring of properties specified in this International Standard are described in other ISO Standards.

  • Standard
    12 pages
    English language
    sale 15% off
  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    13 pages
    French language
    sale 15% off

ISO 15397:2014 specifies the list of relevant properties of paper substrates to be communicated between the paper and printing industries. ISO 15397:2014 is applicable to papers intended to be printed in rotogravure, cold-set web offset, heat-set web offset, sheet-fed offset, and flexographic printing processes and to proofing substrates.

  • Standard
    12 pages
    English language
    sale 15% off
  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    13 pages
    French language
    sale 15% off

This part of ISO 11084 specifies the shapes, dimensions and positions for the pins and holes of a register system used to achieve accurate image positioning on a printing forme during the plate-making operations undertaken during the printing forme preparation process. It is also applicable to plate-bending equipment and transfer systems required to convert between register pin systems. This part of ISO 11084 is applicable to prepress pin registering system for plate making using printing formes ? 420 mm x 594 mm (A2). It is applicable by analogy to the pin register systems of printing presses.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 11084-2:2006 specifies the shapes, dimensions and positions for the pins and holes of a register system used to achieve accurate image positioning on a printing forme during the plate-making operations undertaken during the printing forme preparation process. It is also applicable to plate-bending equipment and transfer systems required to convert between register pin systems. ISO 11084-2:2006 is applicable to prepress pin registering system for plate making using printing formes equal to or larger than 420 mm by 594 mm (A2). It is applicable by analogy to the pin register systems of printing presses.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This International Standard specifies the aim and tolerance values for the nominal widths of rolls of black-and-white and colour photographic papers for use in contact and projection printers. It also specifies splice parameters, core dimensions, requirements for winding, and package marking.

  • Standard
    8 pages
    English language
    sale 15% off
  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Specifies the positions and dimensions for the pins and holes of three-pin register systems to achieve accurate positioning of originals, separations and printing plates on press and prepress equipment. Applies to punched materials, e.g. photographic materials, foils and papers; machines and devices for punching the above materials; machines and devices using register systems. Does not apply to punched metallic materials.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Specifies the positions and dimensions for the pins and holes of three-pin register systems to achieve accurate positioning of originals, separations and printing plates on press and prepress equipment. Applies to punched materials, e.g. photographic materials, foils and papers; machines and devices for punching the above materials; machines and devices using register systems. Does not apply to punched metallic materials.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard applies to remanufactured and compatible ink cartridges for operation in a typical office
environment. The objective of the standard is to provide two areas for common testing:
1. Provide test methodologies to assess potential cartridge/ink interactions with the printer/printhead and
to safeguard the continuous functioning of the printer and printhead.
2. Measurement of yield
No other claims can be made from this testing regarding image quality, reliability, etc.
In general throughout the text, only printers and prints are mentioned for the purpose of simplification.
Nevertheless this standard also applies to copiers, fax machines and multifunction machines as well as to
the copies and facsimiles produced by them however the methods described in this standard are for use on
the digital input printing part of any of these systems.

  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document applies to remanufactured and compatible toner cartridges for operation in a typical office environment.
The objective of the standard is to provide two areas for common testing:
1) Provide test methodologies to asses cartridge interactions with the printer and to safeguard the continuous functioning of the printer
2) Measurement of yield
No other claims can be made from this testing regarding image quality, reliability, etc.
In general throughout the text, only printers and prints are mentioned for the purpose of simplification. Nevertheless this standard also applies to copiers, fax machines and multifunction machines as well as to the copies and facsimiles produced by them however the methods described in this standard are for use on the digital input printing part of any of these systems.

  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    7 pages
    English language
    sale 15% off
  • Standard
    7 pages
    French language
    sale 15% off
  • Standard
    8 pages
    English language
    sale 15% off
  • Standard
    8 pages
    French language
    sale 15% off
  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off
  • Standard
    7 pages
    English language
    sale 15% off
  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    7 pages
    French language
    sale 15% off
  • Standard
    7 pages
    English language
    sale 15% off
  • Standard
    7 pages
    French language
    sale 15% off
  • Standard
    7 pages
    French language
    sale 15% off
  • Standard
    7 pages
    English language
    sale 15% off
  • Standard
    7 pages
    French language
    sale 15% off
  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day