Ships and marine technology — Marine evacuation systems — Testing under conditions of icing

This document provides specifications for a test of marine evacuation systems (MES) under conditions of icing in support of the requirement in paragraph 6.2.2.1.8 of the International Life-saving Appliance (LSA) Code.

Navires et technologie maritime — Systèmes d'évacuation maritimes — Conditions de prise de la glace

General Information

Status
Published
Publication Date
04-Jun-2019
Current Stage
6060 - International Standard published
Start Date
05-Jun-2019
Completion Date
05-Jun-2019
Ref Project

Buy Standard

Standard
ISO 19897:2019 - Ships and marine technology -- Marine evacuation systems -- Testing under conditions of icing
English language
4 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (sample)

INTERNATIONAL ISO
STANDARD 19897
First edition
2019-06
Ships and marine technology —
Marine evacuation systems — Testing
under conditions of icing
Navires et technologie maritime — Systèmes d'évacuation maritimes
— Conditions de prise de la glace
Reference number
ISO 19897:2019(E)
ISO 2019
---------------------- Page: 1 ----------------------
ISO 19897:2019(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2019

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 19897:2019(E)
Contents Page

Foreword ........................................................................................................................................................................................................................................iv

Introduction ..................................................................................................................................................................................................................................v

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ...................................................................................................................................................................................... 1

3 Terms and definitions ..................................................................................................................................................................................... 1

4 Test arrangements and functions to be tested ...................................................................................................................... 2

4.1 Deployment ................................................................................................................................................................................................ 2

4.2 Stowage container ................................................................................................................................................................................ 2

4.3 Bowsing/retaining system ............................................................................................................................................................ 2

4.4 Access to the passage ........................................................................................................................................................................ 2

5 Test procedure ........................................................................................................................................................................................................ 2

5.1 Ice accretion procedure ................................................................................................................................................................... 2

5.2 Reference device .................................................................................................................................................................................... 3

Bibliography ................................................................................................................................................................................................................................ 4

© ISO 2019 – All rights reserved iii
---------------------- Page: 3 ----------------------
ISO 19897:2019(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www .iso .org/patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to the

World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso

.org/iso/foreword .html.

This document was prepared by ISO/TC 8, Ships and marine technology, Subcommittee SC 1,

Maritime safety.

Any feedback or questions on this document should be directed to the user’s national standards body. A

complete listing of these bodies can be found at www .iso .org/members .html.
iv © ISO 2019 – All rights reserved
---------------------- Page: 4 ----------------------
ISO 19897:2019(E)
Introduction

The International Life-saving Appliance (LSA) Code states in paragraph 6.2.2.1.8 that a marine

evacuation system shall be designed to, as far as practicable, remain effective under conditions of icing.

This document is intended to provide uniform test speci
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.