Textiles — Tests for colour fastness — Part X06: Colour fastness to soda boiling

Textiles — Essais de solidité des teintures — Partie X06: Solidité des teintures au débouillissage à l'air libre

General Information

Status
Withdrawn
Publication Date
16-Dec-1987
Withdrawal Date
16-Dec-1987
Current Stage
9599 - Withdrawal of International Standard
Completion Date
25-Aug-1994
Ref Project

Relations

Buy Standard

Standard
ISO 105-X06:1987 - Textiles -- Tests for colour fastness
English language
2 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

[SO
INTERNATIONAL STANDARD
105x06
rhird edition
1987- 12-1 5
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION
ORGANISATION INTERNATIONALE DE NORMALISATION
MEXAYHAPOAHAR OPrAHM3AuMR fl0 CTAHAAPTMBAL&lM
Textiles - Tests for colour fastness -
Part XO6:
Colour fastness to soda boiling
Textiles - Essais de solidité des teintures -
Partie XO6: Solidit6 des teintures au débouillissage A l’air libre
Reference number
IS0 105-XO6: 1987 (E)

---------------------- Page: 1 ----------------------
Foreword
IS0 (the International Organization for Standardization) is a worldwide federation of
national standards bodies (IS0 member bodies). The work of preparing International
Standards is normally carried out through IS0 technical committees. Each member
body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the IS0 Council. They are approved in accordance with IS0 procedures requiring at
least 75 % approval by the member bodies voting.
International Standard IS0 105-XO6 was prepared by Technical Committee ISO/TC 38,
Textiles.
This third edition cancels and replaces the second edition (included in IS0 105-X:
19841, of which it constitutes a minor revision.
IS0 105 was previously published in thirteen "parts", each designated by a letter (e.g.
"Part A"), with publication dates between 1978 and 1985. Each part contained a series
of "sections" each designated by the respective part letter and by a two-digit serial
number (e.g. "Section A01"). These sections are now being republished as separate
documents, themselves designated "parts" but retaining their earlier alphanumeric
designations. A complete list of these parts is given in IS0 105-AOI .
Users should note that all International Standards undergo revision from time to time
and that any reference made herein to any other International Standard implies its
latest edition, unless otherwise stated.
O International Organization for Standardization, 1987 O
Printed in Switzerland

---------------------- Page: 2 ----------------------
I NTE R NAT1 O N AL STAN DARD
Textiles - Tests for colour fastness -
Part X06 :
Colour fastness to soda boiling
4.4 Adjacent fabric, measuring 10 cm x 4 cm, of the type
1 Scope and field of application
under test (or if fibre or yarn is being tested, adjacent fabric
made from the same kind of fibre).
1.1 This part of IS0 105 specifies a method for determining
the resistance of the colour of textiles of all kinds and in all
Sodium carbonate, solution containing 10 g of anhy-
4.5
forms to the action of boiling dilute sodium carbonate solution.
drous sodium carbonate per litre.
The method is mainly applicable to natural and regenerated
cellulose materials.
4.6 Sodium carbonate, solution containing 10 g of
anhydrous sodium carbonate and 4 g of sodium m-nitro-
Two tests are provided : one with and the other without
1.2
benzenesulfonate per litre.
the addition of a reduction inhibitor.
4.7 Test controls : dyeings of CI Vat Red 1 (Colour Index,
3rd Edition) (see clause 8).
2 References
4.8 Grey scales for assessing change in colour and
IS0 105, Textiles - Tests for colour fastness -
staining (see clause 2).
Part A01 : General principles of testing.
5 Test specimens
Part A02 : Grey scale for assessing change in colour.
5.1 Two composite test specimens, prepared as follows, are
Part A03 : Grey scale for assessing staining.
required for the tests with and without the addition of a reduc-
tion inhibitor.
5.2 If the textile to be tested is fabric, place a specimen
3 Principle
measuring 10 cm x 4 cm between one piece of undyed cotton
fabric (4.3) and one piece of adjacent fabric (4.4) and sew along
A specimen of the textile between specified undyed cloths is
rolled around a glass rod and treated with boiling sodium car- one of the shorter sides to form a composite specimen.
bonate solution with and without the addition of a reduction
inhibitor. The composite specimen is rinsed and dried. The
5.3 If the textile to be tested is yarn, knit it into fabric and
change in colour of the specimen and the st
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.