ISO/TS 17920:2015

Fibre ropes for offshore stationkeeping — Aramid

ISO/TS 17920:2015 specifies the main characteristics and test methods of new aramid fibre ropes used for offshore stationkeeping.

Cordages en fibres pour le maintien en position des structures marines — Aramide

General Information

• Status: Withdrawn
• Publication Date: 03-Aug-2015
• ICS: 59.080.50 - Ropes
• Technical Committee: ISO/TC 38 - Textiles
• Drafting Committee: ISO/TC 38/WG 21 - Ropes, cordage, slings and netting
• Current Stage: 9599 - Withdrawal of International Standard
• Completion Date: 01-Mar-2024

Relations

• Revised: ISO 18692-5:2024 - Fibre ropes for offshore stationkeeping — Part 5: Aramid
• Effective Date: 11-Feb-2023

Standards Content (Sample)

TECHNICAL ISO/TS
SPECIFICATION 17920
First edition
2015-08-01
Fibre ropes for offshore
stationkeeping — Aramid
Cordages en fibres pour le maintien en position des structures
marines — Aramide
Reference number
ISO/TS 17920:2015(E)
©
ISO 2015

---------------------- Page: 1 ----------------------
ISO/TS 17920:2015(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2015 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/TS 17920:2015(E)

Contents Page
Foreword .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Materials . 2
4.1 Rope core material . 2
4.2 Rope cover material . 2
4.3 Other materials . 2
5 Requirements — Rope properties . 2
5.1 Minimum breaking strength . 2
5.2 Minimum core tenacity . 3
5.3 Axial compression fatigue properties . 3
5.4 Particle ingress protection . 3
5.5 Cyclic loading performance . 3
6 Requirements — Rope layout and construction . 3
6.1 General . 3
6.2 Type of construction . 3
6.3 Rope core . 3
6.4 Protective cover . 4
6.5 Terminations .
...