ISO 10087:2022/Amd 1

Petits navires — Identification du bateau — Système de codage — Amendement 1

General Information

• Status: Not Published
• ICS: 47.080 - Small craft
• Technical Committee: ISO/TC 188 - Small craft
• Drafting Committee: ISO/TC 188/WG 9 - Main dimensions of the craft and identification of the hull
• Current Stage: 6000 - International Standard under publication
• Start Date: 07-May-2026
• Completion Date: 09-May-2026

Relations

• Consolidates: EN ISO 10087:2022/prA1 - Small craft - Craft identification - Coding system - Amendment 1 (ISO 10087:2022/DAM 1:2025)
• Effective Date: 12-Feb-2026
• Amends: ISO 10087:2022 - Small craft — Craft identification — Coding system
• Effective Date: 08-Mar-2025

Overview

ISO 10087:2022/Amd 1 is an International Standard developed by ISO Technical Committee 188 (ISO/TC 188) focusing on small craft. This amendment to ISO 10087:2022 addresses updates in the craft identification coding system, setting requirements for unique and consistent identification numbers for small watercraft, such as boats and personal watercraft. Craft identification numbers (CINs) are essential for traceability, safety, and regulatory compliance within the recreational boating sector.

Compliance with this standard supports boat manufacturers, regulatory bodies, and recognized organizations in aligning with essential requirements under relevant international and European directives, including EU Directive 2013/53/EU.

Key Topics

• Craft Identification Number Formatting
  • The standard specifies that a craft identification number consists of a unique combination of 14 consecutive characters plus a hyphen, as outlined by the updated rules. There should be no intervening spaces, slashes, or dashes other than the specified hyphen.
• Manufacturer’s Identification Code
  • Three characters within the identification number serve as the manufacturer's code. These codes are allocated by national authorities or recognized organizations and may include numerals and/or letters (excluding 0 and 1).
• Serial Number Structure
  • The identification scheme dictates that five characters are reserved for the serial number, which can contain numerals and/or letters, excluding the letters I, O, and Q for clarity.
• Correction Procedures
  • Manufacturers are required to correct any mistake in both the visible and hidden craft identification numbers, ensuring the craft is correctly and consistently identified.

Applications

The ISO 10087:2022/Amd 1 standard is vital for several practical applications in the marine and boating industry:

• Small Craft Manufacturing
  • Ensures standardized assignment and marking of craft identification numbers, supporting global traceability and accountability.
• Regulatory Compliance
  • Aligns small craft identification practices with international and regional legislation, particularly for compliance with the European Directive 2013/53/EU on recreational craft and personal watercraft.
• Market Access and Trade
  • Promotes smooth market access across regions by harmonizing identification procedures and recognizing the equivalence of conformity assessments.
• Safety and Theft Prevention
  • A unique and traceable craft identification system aids in accident investigations, theft recovery, and ownership verification.
• Inspection and Post-Construction Assessment
  • Supports authorities and third parties in verifying craft information, including during post-construction conformity assessment processes as required under Module PCA (post-construction assessment).

Related Standards

For a comprehensive approach to small craft identification and safety, consider these related standards and regulations:

• ISO 10087:2022 - Small craft - Craft identification - Coding system
• EU Directive 2013/53/EU - Requirements for recreational craft and personal watercraft
• Commission Implementing Regulation (EU) 2017/1 - Procedures for watercraft identification under Directive 2013/53/EU
• ISO/IEC Directives, Part 1 and Part 2 - General principles for drafting and maintaining ISO standards

---

By implementing ISO 10087:2022/Amd 1, organizations involved in the design, manufacture, compliance, or regulation of small craft will ensure their operations are up to date with the latest international expectations for craft identification and traceability. These standards enable safer waterways, more robust regulatory oversight, and smoother cross-border trade of marine vessels.

Standards Content (Sample)

DRAFT
Amendment
ISO 10087:2022/
DAM 1
ISO/TC 188
Small craft — Craft identification —
Secretariat: SIS
Coding system
Voting begins on:
AMENDMENT 1
2025-07-21
Petits navires — Identification du bateau — Système de codage Voting terminates on:
2025-10-13
AMENDEMENT 1
ICS: 47.080
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO 10087:2022/DAM 1:2025(en)
DRAFT
ISO 10087:2022/DAM 1:2025(en)
Amendment
ISO 10087:2022/
DAM 1
ISO/TC 188
Small craft — Craft identification —
Secretariat: SIS
Coding system
Voting begins on:
AMENDMENT 1
Petits navires — Identification du bateau — Système de codage Voting terminates on:
AMENDEMENT 1
ICS: 47.080
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2025
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: [phone]
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: [e-mail]
Website: www.iso.org
Published in Switzerland Reference number
ISO 10087:2022/DAM 1:2025(en)
ii
ISO 10087:2022/DAM 1:2025(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been establishe
...

International
Standard
ISO 10087
Fifth edition
Small craft — Craft identification —
2022-01
Coding system
AMENDMENT 1
AMENDMENT 1
Petits navires — Identification du bateau — Système de codage
AMENDEMENT 1
PROOF/ÉPREUVE
Reference number
ISO 10087:2022/Amd.1:2026(en) © ISO 2026

ISO 10087:2022/Amd.1:2026(en)
© ISO 2026
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
PROOF/ÉPREUVE
ii
ISO 10087:2022/Amd.1:2026(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO’s adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 188, Small craft, in collaboration with
the European Committee for Standardization (CEN) Technical Committee CEN/TC 464, Small Craft, in
accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
PROOF/ÉPREUVE
iii
ISO 10087:2022/Amd.1:2026(en)
Small craft — Craft identification — Coding system
AMENDMENT 1
4.1
Replace 4.1 wit
...

ISO 10087:2022/AMD PRF Amd 1:2026(en)
ISO/TC 188/WG 9
Secretariat: SIS
Date: 2026-02-0416
Small craft — Craft identification — Coding system — Amendment
AMENDMENT 1
Petits navires — Identification du bateau — Système de codage
AMENDEMENT 1
PROOF
TTTThihhhiiis drs drs drs draaaafffftttt i i i is s s s ssususububbbmimmmiiitttttttteeeedd d d ttttoooo  aaaa  ppppaaaarrrraaaallellellellel l l l vvvvooootttteeee i i i innnn  IIIISSSSOOOO,,,,  CCCCEEEEN.N.N.N.

ISO 10087:2022/PRF Amd 1(en)
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication
may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying,
or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO
at the address below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
E-mail: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
ISO 10087:2022/PRF Amd 1(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of
ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent rights
in respect thereof. As of the date of publication of this document, ISO had not received notice of (a) patent(s)
which may be required to implement this document. However, implementers are cautioned that this may not
represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO’s adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 188, Small craft, in collaboration with the
European Committee for Standardization (CEN) Technical Committee CEN/TC 464, Small Craft, in accordance
with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
...

PROJET
Amendement
ISO 10087:2022/
DAM 1
ISO/TC 188
Petits navires — Identification du
Secrétariat: SIS
bateau — Système de codage
Début de vote:
AMENDEMENT 1
2025-07-21
Small craft — Craft identification — Coding system Vote clos le:
2025-10-13
AMENDMENT 1
ICS: 47.080
CE DOCUMENT EST UN PROJET DIFFUSÉ
POUR OBSERVATIONS ET APPROBATION. IL
EST DONC SUSCEPTIBLE DE MODIFICATION
ET NE PEUT ÊTRE CITÉ COMME NORME
INTERNATIONALE AVANT SA PUBLICATION EN
TANT QUE TELLE.
OUTRE LE FAIT D’ÊTRE EXAMINÉS POUR
Ce document n’a pas été rédigé par le Secrétariat central de l’ISO.
ÉTABLIR S’ILS SONT ACCEPTABLES À DES
FINS INDUSTRIELLES, TECHNOLOGIQUES ET
COMMERCIALES, AINSI QUE DU POINT DE VUE
DES UTILISATEURS, LES PROJETS DE NORMES
INTERNATIONALES DOIVENT PARFOIS ÊTRE
TRAITEMENT PARALLÈLE ISO/CEN
CONSIDÉRÉS DU POINT DE VUE DE LEUR
POSSIBILITÉ DE DEVENIR DES NORMES
POUVANT SERVIR DE RÉFÉRENCE DANS LA
RÉGLEMENTATION NATIONALE.
LES DESTINATAIRES DU PRÉSENT PROJET
SONT INVITÉS À PRÉSENTER, AVEC LEURS
OBSERVATIONS, NOTIFICATION DES DROITS
DE PROPRIÉTÉ DONT ILS AURAIENT
ÉVENTUELLEMENT CONNAISSANCE
ET À FOURNIR UNE DOCUMENTATION
EXPLICATIVE.
Numéro de référence
ISO 10087:2022/DAM 1:2025(fr)
ISO 10087:2022/DAM 1:2025(fr)
ISO/TC 188
ISO 10087:2022/DAM 1:2025(fr)
Secrétariat : SIS
Date : 2025-05-23
Petits navires — Identification du bateau — Système de codage — Amendement 1
Small craft — Craft identification — Coding system — Amendment 1
DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2025
Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en œuvre, aucune partie de cette
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,
y compris la photocopie, ou la diffusion sur l’internet ou sur un intranet, sans autorisation écrite préalable. Une autorisation peut
être demandée à l’ISO à l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Genève
Tél.: [phone]
E-mail: [e-mail]
Web: www.iso.org
Publié en Suisse

ii
ISO 10087:2022/DAM 1:2025(fr)
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale d’organismes
nationaux de normalisation (comités membres de l’ISO). L’élaboration des Normes internationales est en
général confiée aux comités techniques de l’ISO. Chaque comité membre intéressé par une étude a le droit
de faire partie du comité technique créé à cet effet. Les organisations internationales, gouvernementales
et non gouvernementales, en liaison avec l’ISO participent également aux travaux. L’ISO collabore
étroitement avec la Commission électrotechnique internationale (IEC) en ce qui concerne la
normalisation électrotechnique.
Les procédures utilisées pour élaborer le présent document et celles destinées à sa mise à jour sont
décrites dans les Directives ISO/IEC, Partie 1. Il convient, en particulier, de prendre note des différents
critères d’approbation requis pour les différents types de documents ISO. Le présent document a été
rédigé conformément aux règles de rédaction donnée
...