ISO 1206:2023/Amd 1:2024

Rolling bearings — Needle roller bearings with machined rings — Boundary dimensions, geometrical product specifications (GPS) and tolerance values — Amendment 1

Roulements — Roulements à aiguilles avec bagues usinées — Dimensions d'encombrement, spécification géométrique des produits (GPS) et valeurs de tolérance — Amendement 1

General Information

• Status: Published
• Publication Date: 05-Sep-2024
• ICS: 21.100.20 - Rolling bearings
• Technical Committee: ISO/TC 4/SC 5 - Needle, cylindrical and spherical roller bearings
• Drafting Committee: ISO/TC 4/SC 5 - Needle, cylindrical and spherical roller bearings
• Current Stage: 6060 - International Standard published
• Start Date: 06-Sep-2024
• Due Date: 29-Nov-2024
• Completion Date: 06-Sep-2024

Relations

• Amends: ISO 1206:2023 - Rolling bearings — Needle roller bearings with machined rings — Boundary dimensions, geometrical product specifications (GPS) and tolerance values
• Effective Date: 03-Jun-2023

Standards Content (Sample)

International
Standard
ISO 1206
Fifth edition
Rolling bearings — Needle roller
2023-01
bearings with machined rings —
Boundary dimensions, geometrical
AMENDMENT 1
product specifications (GPS) and
2024-09
tolerance values
AMENDMENT 1
Roulements — Roulements à aiguilles avec bagues usinées —
Dimensions d'encombrement, spécification géométrique des
produits (GPS) et valeurs de tolérance
AMENDEMENT 1
Reference number
ISO 1206:2023/Amd.1:2024(en) © ISO 2024

ISO 1206:2023/Amd.1:2024(en)
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
ISO 1206:2023/Amd.1:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards
...