Ships and marine technology — Marine environment protection: performance testing of oil skimmers — Part 3: High viscosity oil

ISO 21072-3:2010 specifies a methodology for establishing quantitative performance data for oil skimmers for recovery of oil with high viscosity, so the end user can objectively judge, compare and evaluate the design and performance of different skimmers. The methodology applies to testing in a basin and requires control of oil properties and oil slick characteristics. The method is applicable to all types of skimmer provided that the equipment dimensions are within the physical limitations of the test basin. The test procedure provides full-scale test results for the unit tested, under controlled conditions, and for one or more classes of highly viscous oil. Attention is drawn to the care required when applying the test results to predict a realistic skimmer performance under field conditions. For dedicated/inbuilt systems the test procedures outlined in this part of ISO 21072 are only applicable to the skimming device as such, not the entire skimming system.

Navires et technologie maritime — Protection de l'environnement marin: essais de performance des écumeurs du pétrole — Partie 3: Pétrole haute densité

General Information

Status
Withdrawn
Publication Date
22-Feb-2010
Withdrawal Date
22-Feb-2010
Current Stage
9599 - Withdrawal of International Standard
Completion Date
18-Sep-2020
Ref Project

Relations

Buy Standard

Standard
ISO 21072-3:2010 - Ships and marine technology -- Marine environment protection: performance testing of oil skimmers
English language
10 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 21072-3
First edition
2010-03-01

Ships and marine technology — Marine
environment protection: performance
testing of oil skimmers —
Part 3:
High viscosity oil
Navires et technologie maritime — Protection de l'environnement marin:
essais de performance des écumeurs du pétrole —
Partie 3: Pétrole haute densité




Reference number
ISO 21072-3:2010(E)
©
ISO 2010

---------------------- Page: 1 ----------------------
ISO 21072-3:2010(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


COPYRIGHT PROTECTED DOCUMENT


©  ISO 2010
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2010 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 21072-3:2010(E)
Contents Page
Foreword .iv
Introduction.v
1 Scope.1
2 Normative references.1
3 Terms and definitions .1
4 Test facility requirements.2
4.1 General .2
4.2 Oil properties .2
4.3 Air and water temperature.3
4.4 Oil slick thickness .3
4.5 Measuring tanks .3
5 Clearance requirements.3
6 Test parameters.3
6.1 General .3
6.2 Test oil properties .3
6.3 Oil slick thickness .4
6.4 Skimmer operating parameters .4
6.5 Debris interference.4
6.6 Skimmer movement through slick.5
7 Test procedures.5
7.1 Preparations prior to testing .5
7.2 Actions during testing period .6
7.3 Actions after testing.6
8 Performance parameters .6
8.1 General .6
8.2 Fluid recovery rate .6
8.3 Oil recovery testing rate .7
8.4 Oil recovery efficiency .7
9 Measurements and reporting .7
9.1 General .7
9.2 Oil properties .7
9.3 Environmental parameters .7
9.4 Skimmer operating parameters .7
9.5 Other test parameters .8
9.6 Recovery parameters.8
9.7 Performance parameters (calculated parameters) .8
9.8 Equipment specification and test documentation .8
10 Quality control .8
10.1 Test duration and fluid volume .8
10.2 Repetitions .9
Bibliography.10

© ISO 2010 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 21072-3:2010(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 21072-3 was prepared by Technical Committee ISO/TC 8, Ships and marine technology, Subcommittee
SC 2, Marine environment protection.
ISO 21072 consists of the following parts, under the general title Ships and marine technology — Marine
environment protection: performance testing of oil skimmers:
⎯ Part 1: Moving water conditions
⎯ Part 2: Static water conditions
⎯ Part 3: High viscosity oil
iv © ISO 2010 – All rights reserved

---------------------- Page: 4 ----------------------
ISO 21072-3:2010(E)
Introduction
ISO 21072 standardizes performance testing of oil skimmers used in marine pollution control.
Some oil skimmers have previously been performance tested under non-standard conditions and procedures,
with declared performance parameters being of limited value to the end user, especially under field conditions.
ISO 21072 provides for carrying out and recording the results of full-scale tests for a skimmer under a variety
of test conditions.

© ISO 2010 – All rights reserved v

---------------------- Page: 5 ----------------------
INTERNATIONAL STANDARD ISO 21072-3:2010(E)

Ships and marine technology — Marine environment
protection: performance testing of oil skimmers —
Part 3:
High viscosity oil
1 Scope
This part of ISO 21072 specifies a methodology for establishing quantitative performance data for oil
skimmers for recovery of oil with high viscosity, so the end user can objectively judge, compare and evaluate
the design and performance of different skimmers. The methodology applies to testing in a basin and requires
control of oil properties and oil slick characteristics.
The method is applicable to all types of skimmer provided that the equipment dimensions are within the
physical limitations of the test basin. The test procedure provides full-scale test results for the unit tested,
under controlled conditions, and for one or more classes of highly viscous oil. Attention is drawn to the care
required when applying the test results to predict a realistic skimmer performance under field conditions.
For dedicated/inbuilt systems the test procedures outlined in this part of ISO 21072 are only applicable to the
skimming device as such, not the entire skimming system.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 16165, Ships and marine technology — Marine environment protection — Terminology relating to oil spill
response
ISO 21072-1, Ships and marine technology — Marine environment protection: performance testing of oil
skimmers — Part 1: Moving water conditions
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 16165, ISO 21072-1 and the
following apply.
3.1
high viscosity oil
oil that due to its properties does not readily flow to a skimmer
© ISO 2010 – All rights reserved 1

---------------------- Page: 6 ----------------------
ISO 21072-3:2010(E)
4 Test facility requirements
4.1 General
This part of ISO 21072 is applicable to any test arrangement that allows for the control and monitoring of the
test conditions specified.
Figure 1 gives examples of test arrangements.

a)  Test tank set-up prior to commencement of test and under test conditions

b)  Skimme
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.