ISO 105-E10:1987
(Main)Textiles — Tests for colour fastness — Part E10: Colour fastness to decatizing
Textiles — Tests for colour fastness — Part E10: Colour fastness to decatizing
Textiles — Essais de solidité des teintures — Partie E10: Solidité des teintures au décatissage
General Information
Relations
Buy Standard
Standards Content (Sample)
IS0
INTERNATIONAL STANDARD 105-El0
Second edition
1987-1 2-1 5
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION
ORGANISATION INTERNATIONALE DE NORMALISATION
MEXaYHAPOAHAR OPrAHM3AuMR flO CTAHAAPTMBAuMM
Textiles - Tests for colour fastness -
Part E10:
Colour fastness to decatizing
Textiles - Essais de solidit4 des teintures -
Partie E70: Solidité des teintures au décatissage
Reference number
IS0 105-EI0: 1987 (E)
---------------------- Page: 1 ----------------------
Foreword
IS0 (the International Organization for Standardization) is a worldwide federation of
national standards bodies (IS0 member bodies). The work of preparing International
Standards is normally carried out through IS0 technical committees. Each member
body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the IS0 Council. They are approved in accordance with IS0 procedures requiring at
least 75 YO approval by the member bodies voting.
International Standard IS0 105-El0 was prepared by Technical Committee ISO/IC 38,
Textiles.
This second edition cancels and replaces the first edition (included in IS0 105-E: 19781,
of which it constitutes a minor revision.
IS0 105 was previously published in thirteen "parts", each designated by a letter (e.g.
"Part A"), with publication dates between 1978 and 1985. Each part contained a series
of "sections" each designated by the respective part letter and by a two-digit serial
number (e.g. "Section A01"). These sections are now being republished as separate
documents, themselves designated "parts" but retaining their earlier alphanumeric
designations. A complete list of these parts is given in IS0 105-AOl.
Users should note that all International Standards undergo revision from time to time
and that any reference made herein to any other International Standard implies its
latest edition, unless otherwise stated.
'c, International Organization for Standardization, 1987 0
Printed in Swttzerland
---------------------- Page: 2 ----------------------
IS0 105-El0 : 1987 (E)
INTERNATIONAL STANDARD
Textiles - Tests for colour fastness -
Part E10 :
Colour fastness to decatizing
Cotton blanket cloth, boiled off, napped on both sides,
4.2
Scope and field of application
1
of mass per unit area about 400 g/d.
This part of IS0 105 specifies a method for determining the
resistance of the colour of textiles to the action of steam, as
4.3 Two cotton adjacent fabrics, each measuring
employed in the decatizing of wool fabrics. Two tests, mild and
10 cm x 4 cm.
severe, are given.
Test control : a dyeing of CI Mordant Brown 33 (Colour
4.4
Index, 3rd edition; see 8.2).
2 References
4.5 Grey scale for assessing change in colour (see
IS0 105, Textiles - Tests for colour fastness -
clause 2).
Part AN: General principles of testing
Part A02: Grey scale for assessing change in colour. 5 Test specimen
5.1 If the textile to be tested is fabric, use a specimen
10 cm x 4 cm.
3 Principle
A specimen of the textile is wrapped round a perforated
5.2 If the textile to be tested is yarn, knit it into fabric and use
\
cylinder, and steam passed through it for 15 min. The change
a 10 cm x 4 cm specimen, or form a layer of parallel lengths of
in colour of the dried specimen is assessed with the grey scale.
it, place it between two cotton adjacent fabrics (4.3) and sew
Correct handling of the method is controlled by use of a test-
around all four sides to hold the yarn in place.
control specimen tested under identical conditions.
5.3 If the textile to be tested is loose fibre, comb
...
'-
IS0
NORME INTERNATIONALE
105-El0
Deuxième tdition
1987- 12- 1 5
I
,
IZATION FOR STANDARDIZATION
ATIONALE DE NORMALISATION
HM3AqMFI no CTAHAAPTM3AL(MM
O
Textiles - Essais de solidité des teintures -
Partie E10:
Solidité des teintures au décati J sage
Textiles - Tests for colour fastness -
Part EIO: Colour fastness to decatiring
O
I
Numéro de référence
IS0 105-ElO: 1987 (F)
---------------------- Page: 1 ----------------------
Avant-propos
comites membres votants.
La Norme internationale IS0 105-El0 a et6 Blaboree pa le cornite technique
ISO/TC 38, Textiles.
Cette deuxieme edition annule et remplace la premiere edition (incorporee dans
I’ISO 105-E : 19781, dont elle constitue une revision mineure. 1
L‘ISO 105 a et6 auparavant publiee en treize ((parties)), chacun designee par une lettre
(par exemple ((Partie A))), avec des dates de publication allant e 1978 B 1985. Chaque
partie contenait une serie de ((sections)) dont chacune etait d signee par la lettre cor-
respondant B la partie respective et par un numero de drie B de x chiffres (par exemple
((Section A01 n). Ces sections sont B present publiees B nouv au comme documents
separes, eux-m6mes designes ((parties)) mais en conservant I urs designations alpha-
numeriques anterieures. Une liste complbte de ces par j ies est donnee dans
I‘ISO 105-AOI.
I
L’attention des utilisateurs est attiree sur le fait que toutes les1 Normes internationales
sont de temps en temps soumises B revision et que toute ref rence faite B une autre
Norme internationale dans le present document implique qu’ e I s’agit, sauf indication
contraire, de la derniere edition.
@ Organisation internationale de normalisation, 1987 0
Imprime en Suisse
t II II 1 Il //I
---------------------- Page: 2 ----------------------
I
NORME INTERNATIONALE
IS0 105-EIO : 1987 (FI
Textiles - Essais de solidit6 des teintures -
.
Partie EIO:
1
Solidité des teintures au dé c atissage
4.2 Doublier de coton genre couverture, d6bouilli. gratte
1 Objet et domaine d'application
0
sur les deux faces et ayant une masse surfacique d'environ
400 g/m?
4.3 Deux tissus temoins de coton, chacun de 10 cm x 4 cm.
faible et fort - sont indiques.
Temoin de contrôle: teinture de CI Mordant Brown 33
4.4
(Colour Index, 3e edition; voir 8.2).
2 R6f6rences ~
4.5 Échelle de gris pour I'evaluation des degradations
IS0 105, Textiles - Essais de solidit6 des teintures -
(voir chapitre 2).
Partie AOl: Principes g6nkraux pour effectuer les
5 Éprouvette
Partie A02: Echelle de gris pour IVvaluation des
tions.
5.1 Si le textile B soumettre B l'essai est de 1'6toffe. utiliser
une Bprouvette de 10 cm x 4 cm.
3 Principe
5.2 Si le textile B soumettre B l'essai est du fil, le tricoter et
Une dprouvette du textile est enroulee autour d'un cylindr per-
utiliser une Bprouvette de 10 cm x 4 cm, ou bien former une
for6 qui est travers6 par la vapeur durant 15 min. La de rada-
nappe de fils parallhles, la placer entre deux tissus temoins de
tion de la coloration de 1'8prouvette skchee est Bvaluee avec
0
coton (4.3) et coudre le long des quatre côtes pour maintenir le
1'6chelle de gris. L'application correcte de la methode es veri-
fil en place.
fiee en utilisant un temoin de contrôle soumis B l'essai da s des
conditions identiques.
i
5.3 Si le textile A soumettre B l'essai est de la fibre en bourre,
en peigner et comprimer une quantite suffisante pour former
.
une nappe de 10 cm x 4 cm. Placer la nappe entre deux tissus
4 Appareillage et reactif i
temoins de coton (4.3) et coudre le long des
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.