iTeh Standards logo
EURUSD
Your shopping cart is empty.
ISO

ISO 6553:1980

(Main)

Automatic steam traps - Marking

Automatic steam traps - Marking

The purpose is to establish certain basic requirements for the marking of steam traps, and to give recommendations for additional information markings. Has, in general, to be considered in conjunction with the specific requirements which may be agreed between the partners concerned. Specifies mandatory and optional markings for steam traps.

Purgeurs automatiques de vapeurs d'eau — Marquage

La présente Norme internationale spécifie les marques obligatoires et les marques facultatives à porter sur les purgeurs automatiques de vapeur d'eau.

General Information

Status
Withdrawn
Publication Date
30-Sep-1980
Withdrawal Date
30-Sep-1980
ICS
23.060.01 - Valves in general
Technical Committee
ISO/TC 153 - Valves
Drafting Committee
ISO/TC 153 - Valves
Current Stage
9599 - Withdrawal of International Standard
Start Date
08-Dec-2016
Completion Date
13-Dec-2025
Ref Project

Relations

Revised
ISO 6553:2016 - Automatic steam traps - Marking
Effective Date
10-Aug-2013
ISO 6553:1980 - Automatic steam traps -- MarkingISO 6553:1980 - Automatic steam traps -- Marking
PreviousNext
Standard
ISO 6553:1980 - Automatic steam traps -- Marking
English language
1 pages
sale 15% off
Preview
sale 15% off
Preview
ISO 6553:1980 - Purgeurs automatiques de vapeurs d'eau -- MarquageISO 6553:1980 - Purgeurs automatiques de vapeurs d'eau -- Marquage
PreviousNext
Standard
ISO 6553:1980 - Purgeurs automatiques de vapeurs d'eau -- Marquage
French language
1 pages
sale 15% off
Preview
sale 15% off
Preview
ISO 6553:1980 - Purgeurs automatiques de vapeurs d'eau -- MarquageISO 6553:1980 - Purgeurs automatiques de vapeurs d'eau -- Marquage
PreviousNext
Standard
ISO 6553:1980 - Purgeurs automatiques de vapeurs d'eau -- Marquage
French language
1 pages
sale 15% off
Preview
sale 15% off
Preview

Frequently Asked Questions

ISO 6553:1980 is a standard published by the International Organization for Standardization (ISO). Its full title is "Automatic steam traps - Marking". This standard covers: The purpose is to establish certain basic requirements for the marking of steam traps, and to give recommendations for additional information markings. Has, in general, to be considered in conjunction with the specific requirements which may be agreed between the partners concerned. Specifies mandatory and optional markings for steam traps.

The purpose is to establish certain basic requirements for the marking of steam traps, and to give recommendations for additional information markings. Has, in general, to be considered in conjunction with the specific requirements which may be agreed between the partners concerned. Specifies mandatory and optional markings for steam traps.

ISO 6553:1980 is classified under the following ICS (International Classification for Standards) categories: 23.060.01 - Valves in general. The ICS classification helps identify the subject area and facilitates finding related standards.

ISO 6553:1980 has the following relationships with other standards: It is inter standard links to ISO 6553:2016. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

You can purchase ISO 6553:1980 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of ISO standards.

Standards Content (Sample)


International Standard
INTERNATlONAL ORGANIZATION FOR STANDARDIZATION.MEXJlYHAPO~HAfl OPl-AHM3ALWlfl fl0 CTAH~APTM3ALWl@ORGANISATION INTERNATIONALE DE NORMALlSATlON
Automatic steam traps - Marking
Purgeurs automatiques de vapeur d’eau - Marquage
First edition - 1980-10-15
Ref. No. ISO 65534980 (E)
UDC 621.186.6
Descriptors : industrial valves, traps, steam, marking.
Price based O;I 1 page
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of
national Standards institutes (ISO member bedies). The work of developing Inter-
national Standards is carried out through ISO technical committees. Every member
body interested in a subject for which a technical committee has been set up has the
right to be represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the ISO Council.
International Standard ISO 6553 was developed by Technical Committee ISO/TC 153,
Genera/ purpose industrial valves, and was circulated to the member bodies in
March 1979.
It has been approved by the member bodies of the following countries :
Austria India Romania
Belgium Italy Sweden
Canada Japan Switzerla nd
Chile Korea, Rep. of United Kingdom
Denmark Libyan Arab Jamahiriya USA
Finland Netherlands USSR
France Norway
Germany, F. R. Poland
The mem ber countries expressed disapproval of the document
bodies of the following
on techni cal grounds :
Australia
Czechoslovakia
South Africa, Rep. of
0 International Organkation for Standardkation,. 1980
Printed in Switzerland
ISO 65534980 (IE)
INTERNATIONAL STANDARD
Automatic steam traps - Marking
0 introduc
...


Norme internationale
INTERNATIONAL ORGANIZATION FOR STANDARDIZATIONWblE~YHAPOfiHAR OPI-AHM3A~MR fl0 CTAH&WTM3A~MM@ORGANISATION INTERNATIONALE DE NORMALISATION
Purgeurs automatiques de vapeur d’eau - Marquage
Automa tic steam traps - Marking
Première édition - 19804045
Réf. no : ISO 65534980 (F)
CDU 621.186.6
Descripteurs : robinetterie industrielle, purgeur, vapeur d’eau sous pression, marquage.
Prix basé sur 1 page
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I’ISO). L’élaboration
des Normes internationales est confiée aux comités techniques de I’ISO. Chaque
comite membre intéressé par une étude a le droit de faire partie du comité technique
correspondant. Les organisations internationales, gouvernementales et non gouverne-
mentales, en liaison avec I’ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont soumis
aux comités membres pour approbation, avant leur acceptation comme Normes inter-
nationales par le Conseil de I’ISO.
La Norme internationale ISO 6553 a été élaborée par le comité technique ISO/TC 153,
Robinetterie industrielle pour les usages courants, et a été soumise aux comités mem-
bres en mars 1979.
Les comités membres des pays suivants l’ont approuvée :
Allemagne, R. F. France Roumanie
Autriche Inde
Royaume-Uni
Belgique Italie Suéde
Canada
Jamahiriya arabe libyenne Suisse
Chili Japon URSS
Corée, Rép. de Norvége USA
Danemark
Pays-Bas
Finlande Pologne
Les comités membres des désapprouvée
suivants l’ont pour des raisons techni-
Pays
ques :
Afrique du Sud, Rép. d’
Australie
Tchécoslovaquie
0 Organisation internationale de normalisation, 1980
Imprimé en Suisse
ISO 6553-1980 (F)
NORME INTERNATIONALE
Purgeurs automatiques de vapeur d’eau - Marquage
4 Marquage obligatoire
0 Introduction
Le but de la présente Norme internationale est d’établir certai- Les informations suivantes doivent être obligato
...


Norme internationale
INTERNATIONAL ORGANIZATION FOR STANDARDIZATIONWblE~YHAPOfiHAR OPI-AHM3A~MR fl0 CTAH&WTM3A~MM@ORGANISATION INTERNATIONALE DE NORMALISATION
Purgeurs automatiques de vapeur d’eau - Marquage
Automa tic steam traps - Marking
Première édition - 19804045
Réf. no : ISO 65534980 (F)
CDU 621.186.6
Descripteurs : robinetterie industrielle, purgeur, vapeur d’eau sous pression, marquage.
Prix basé sur 1 page
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I’ISO). L’élaboration
des Normes internationales est confiée aux comités techniques de I’ISO. Chaque
comite membre intéressé par une étude a le droit de faire partie du comité technique
correspondant. Les organisations internationales, gouvernementales et non gouverne-
mentales, en liaison avec I’ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont soumis
aux comités membres pour approbation, avant leur acceptation comme Normes inter-
nationales par le Conseil de I’ISO.
La Norme internationale ISO 6553 a été élaborée par le comité technique ISO/TC 153,
Robinetterie industrielle pour les usages courants, et a été soumise aux comités mem-
bres en mars 1979.
Les comités membres des pays suivants l’ont approuvée :
Allemagne, R. F. France Roumanie
Autriche Inde
Royaume-Uni
Belgique Italie Suéde
Canada
Jamahiriya arabe libyenne Suisse
Chili Japon URSS
Corée, Rép. de Norvége USA
Danemark
Pays-Bas
Finlande Pologne
Les comités membres des désapprouvée
suivants l’ont pour des raisons techni-
Pays
ques :
Afrique du Sud, Rép. d’
Australie
Tchécoslovaquie
0 Organisation internationale de normalisation, 1980
Imprimé en Suisse
ISO 6553-1980 (F)
NORME INTERNATIONALE
Purgeurs automatiques de vapeur d’eau - Marquage
4 Marquage obligatoire
0 Introduction
Le but de la présente Norme internationale est d’établir certai- Les informations suivantes doivent être obligato
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

This May Also Interest You

ISO
ISO 12101:2025(Main)
Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Classification system and qualification procedures for type testing of stem seals for valves

This document covers the type testing of valve stem seals using a test fixture that is designed and fully defined to be representative of the performance of a valve using similar geometry. This document is applicable to stem seals for multi-turn, linear and quarter turn valves. It is intended to provide comparative type test results confirming the performance of seal manufacturers’ stem seal designs. This document is not intended to replace type testing of complete valve assemblies or valve production testing. Compliance with this document is not intended to be a mandatory qualification test to be completed for a stem seal design prior to testing a valve to the requirements of ISO 15848-1. Compressible seals with and without live loading, elastomers and pressure energized seals are in the scope of this document. Corrosion tests are not included in this document.

  • Standard
    24 pages
    English language
    sale 15% off
ISO
ISO 5640:2024(Main)
Industrial valves - Mounting kits for part-turn valve actuator attachment

This document provides requirements for metallic mounting kits for part-turn valves and actuator attachments. It includes all components transmitting torques from actuators to valves with a maximum flange torque up to 16 000 Nm (up to F30 flange type). It applies to mounting kits for part-turn valves and actuators with integral attachment flanges and drive components as described in ISO 5211, when direct mounting of the actuator on valve is not practical. Stacking of mounting kits/intermediate supports is not within the scope of this document. This document specifies methods for design and environmental corrosion protection. When a reference is made to this document, all the requirements apply, unless otherwise agreed between the purchaser and the manufacturer/supplier, prior to order. In this document, the term "valve" covers valve or shaft extension top-flange, and the term “actuator” covers part-turn actuator or combination of multi-turn actuator and gearbox. Control valves are excluded from this document.

  • Standard
    16 pages
    English language
    sale 15% off
  • Standard
    17 pages
    French language
    sale 15% off
  • Standard
    17 pages
    French language
    sale 15% off
ISO
ISO 5115:2023(Main)
Industrial valves - Part-turn valve actuation

This document applies to part-turn actuated valve assemblies comprising valve (e.g. ball valve, butterfly valve, and plug valve), actuator and, when required, a mounting kit supplied as a package. It defines the design considerations necessary for automating valves, the responsibilities for the information required and tasks to be completed, to ensure suitable actuator and mounting kit sizing, selection and assembly on the valve. It applies to pneumatic, hydraulic, electro-hydraulic and electric actuators. An actuator coupled to a gearbox, as defined in ISO 5211, is included in the scope of this document. Lever or manual gearbox operated valves are excluded.

  • Standard
    25 pages
    English language
    sale 15% off
  • Standard
    30 pages
    French language
    sale 15% off
ISO
ISO 5210:2023(Main)
Industrial valves - Multi-turn valve actuator attachments

This document specifies the requirements for the attachment of multi-turn actuators to valves. Throughout this document, “actuator” can be understood as “actuator and/or gearbox” providing a multi-turn and/or linear output. It specifies: - flange dimensions necessary for the attachment of actuators to industrial valves [see Figure 1 a)] or to intermediate supports [see Figure 1 b)]; - those driving component dimensions of actuators which are necessary to attach them to the driven components; - reference values for torque and thrust for flanges having the dimensions specified in this document.

  • Standard
    19 pages
    English language
    sale 15% off
  • Standard
    20 pages
    French language
    sale 15% off
ISO
ISO 5211:2023(Main)
Industrial valves - Part-turn actuator attachments

This document specifies requirements for the attachment of part-turn actuators, with or without gearboxes, to industrial valves. The attachment of part-turn actuators to control valves in accordance with the requirements of this document is subject to an agreement between the supplier and the purchaser. This document specifies: - flange dimensions necessary for the attachment of part-turn actuators to industrial valves [see Figures 1 a) and 1 c)] or to intermediate supports [see Figures 1 b) and 1 d)]; - driving component dimensions of part-turn actuators necessary to attach them to the driven components; - reference values for torques for interfaces and for couplings having the dimensions specified in this document. The attachment of the intermediate support to the valve is out of the scope of this document.

  • Standard
    28 pages
    English language
    sale 15% off
  • Standard
    28 pages
    French language
    sale 15% off
ISO
ISO 5117:2023(Main)
Automatic steam traps - Production and performance characteristic tests

This document specifies the production and performance relevant test requirements for automatic steam traps used for condensate removal/recovery services for optimized utilization of energy, in refinery, power generation or other general applications where steam is used as a medium of heat transfer. The tests can be classified as production tests and performance characteristic tests and can be conducted to ensure the correct functioning of a steam trap or to evaluate the performance of a particular design. This document specifies the tests performed relative to each one of these two categories and briefly describes the corresponding test methods.

  • Standard
    31 pages
    English language
    sale 15% off
  • Standard
    33 pages
    French language
    sale 15% off
ISO
ISO 10497:2022(Main)
Testing of valves - Fire type-testing requirements

This document specifies fire type-testing requirements and a fire type-test method for soft- and metal-seated isolation valves with one or more obturators. It is not applicable to the testing requirements for valve actuators other than manually operated gearboxes or similar mechanisms when these form part of the normal valve assembly. Other types of valve actuators (e.g. electrical, pneumatic or hydraulic) can need special protection to operate in the environment considered in this valve test, and the fire testing of such actuators is outside the scope of this document. This document specifies the measurement and assessment criteria for: a) through-seat leakage; b) external leakage; c) cavity overpressure relief of double-seated valves; d) operability. This document specifies the rules whereby the fire-type testing qualification for a valve can be extended to untested sizes, pressure ratings and materials of construction of the same basic design type. Fire test reports of valves tested according to previous editions of this document are acceptable when submitted together with the full and compliant fire test report as per 6.7 of the edition under which it was tested. Any data missing as required from 6.7 within the fire test report are accepted or rejected at the purchaser’s discretion. NOTE For the purposes of this document, the terms “fire type-test” and “fire test” are synonymous.

  • Standard
    18 pages
    English language
    sale 15% off
  • Standard
    21 pages
    French language
    sale 15% off
ISO
ISO 28921-1:2022(Main)
Industrial valves - Isolating valves for low-temperature applications - Part 1: Design, manufacturing and production testing

This document specifies requirements for design, dimensions, material, fabrication and production testing of gate, globe, ball/plug and butterfly valve design types used as isolation valves and check valves for low-temperature applications. This document is applicable to isolation valves for use in low and cryogenic temperature service where the design low-temperature service is -50 °C down to –196 °C. This document does not apply to valves for cryogenic services, designed in accordance with ISO 21011, used with cryogenic vessels. Where the requirements of this document vary from those given in the valve product standards, the requirements of this document apply. This document is applicable to valves with body, bonnet, bonnet extension or cover made of metallic materials. This document is applicable to: - valves of nominal sizes DN: 10; 15; 20; 25; 32; 40; 50; 65; 80; 100; 125; 150; 200; 250; 300; 350; 400; 450; 500; 600; 650; 700; 750; 800; 850; 900; 950; 1 000; 1 050; 1 200; 1 350; 1 400; 1 500; 1 600; 1 650; 1 800, - corresponding to nominal pipe sizes NPS: ⅜; ½; ¾; 1; 1 ¼; 1 ½; 2; 2 ½; 3; 4; 5; 6; 8; 10; 12; 14; 16; 18; 20; 24; 26; 28; 30; 32; 34; 36; 38; 40; 42; 48; 54; 56; 60; 64; 66; 72, and applies to pressure designations: - PN 16; 25; 40; 100; 160; 250; 400, - Class 150; 300; 600; 800; 900; 1 500; 2 500. NOTE Not all type and size combination are available in all pressure ratings. This document does not apply to safety valves and control valves.

  • Standard
    27 pages
    English language
    sale 15% off
  • Standard
    27 pages
    French language
    sale 15% off
ISO
ISO 5752:2021(Main)
Metal valves for use in flanged pipe systems - Face-to-face and centre-to-face dimensions

This document specifies the basic series of face-to-face (FTF) and centre-to-face (CTF) dimensions for two-way metal valves of the gate, globe, diaphragm, ball, plug, butterfly design types used as isolating and check valves in flanged pipe systems. Each basic series of face-to-face and centre-to-face dimensions can be used as required with flanges of mating dimensions conforming to the equivalent EN or ASME flange series. This document covers valves with the following PN, Class, DN and NPS values: - PN 2,5; PN 6; PN 10; PN 16; PN 25; PN 40; PN 63; PN 100; PN 160; PN 250; PN 320; PN 400; - Class 125; Class 150; Class 250; Class 300; Class 600; Class 900; Class 1 500; Class 2 500; - DN 10; DN 15; DN 20; DN 25; DN 32; DN 40; DN 50; DN 65; DN 80; DN 100; DN 125; DN 150; DN 200; DN 250; DN 300; DN 350; DN 400; DN 450; DN 500; DN 600; DN 650; DN 700; DN 750; DN 800; DN 900; DN 1 000; DN 1 050; DN 1 200; DN 1 400; DN 1 600; DN 1 800; DN 2 000; - corresponding to nominal sizes NPS: ⅜; ½; ¾; 1; 1 ¼; 1 ½; 2; 2 ½; 3; 4; 5; 6; 8; 10; 12; 14; 16; 18; 20; 24; 26; 28; 30; 32; 36; 40; 42; 48; 56; 64; 72; 80. NOTE See Annex B for the relationship between DN and NPS.

  • Standard
    35 pages
    English language
    sale 15% off
ISO
ISO 23632:2021(Main)
Industrial valves - Design validation-testing of valves

Le présent document spécifie les exigences et les critères d’acceptation pour les essais de type, conformes aux conditions de conception, des robinets à tournant sphérique métalliques et robinets à papillon métalliques utilisés pour des services de sectionnement pour toutes les applications industrielles, et sert à valider la conception des produits sur 205 cycles. Le présent document exclut les essais de dispositifs de sécurité, de robinets de régulation, de robinets en matériaux thermoplastiques, et des robinets pour l’alimentation en eau destinée à la consommation humaine et en eaux usées (par exemple la série EN 1074). Le présent document définit la procédure permettant d’étendre la qualification de l’appareil de robinetterie soumis à l’essai à des désignations de dimensions et de pression non soumises à l’essai de la même gamme de produits. Cet essai de type a pour objet de valider la performance de siège pour la relation pression/température précisée par le fabricant, qui figure dans la documentation technique du produit donnée par le fabricant. Cet essai de type vérifie les exigences de couple et le couple de manœuvre maximale admissible (MAST), tels que donnés dans la documentation technique du fabricant. Cet essai de type valide la durabilité de la performance de siège et le couple de manœuvre grâce à des cycles mécaniques et thermiques.

  • Standard
    14 pages
    English language
    sale 15% off
  • Standard
    15 pages
    French language
    sale 15% off