Modular taper interface with ball track system — Part 1: Dimensions and designation of shanks

ISO 26622-1:2008 specifies the dimensions for a modular taper interface with ball track system: tapered shanks for automatic and manual tool exchange to be applied on machine tools (e.g. lathe machines, drilling machines, milling machines and turn/milling machine centres). A range of shank sizes is specified.

Interfaces à cône modulaire avec système de serrage à billes — Partie 1: Dimensions et désignation des queues

L'ISO 26622-1:2008 spécifie les dimensions des interfaces à cône modulaire à système de serrage à billes: queues coniques pour changements automatique et manuel d'outil à utiliser sur des machines-outils (par exemple machines de tournage, machines de perçage, machines de fraisage et machines de tournage-fraisage). Une gamme de dimensions des queues est spécifiée.

General Information

Status
Withdrawn
Publication Date
05-Nov-2008
Withdrawal Date
05-Nov-2008
Technical Committee
Drafting Committee
Current Stage
9599 - Withdrawal of International Standard
Completion Date
27-Apr-2017
Ref Project

Relations

Buy Standard

Standard
ISO 26622-1:2008 - Modular taper interface with ball track system
English language
11 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 26622-1:2008 - Modular taper interface with ball track system
English language
11 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 26622-1:2008 - Interfaces à cône modulaire avec système de serrage à billes
French language
11 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 26622-1:2008 - Interfaces a cône modulaire avec systeme de serrage a billes
French language
11 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 26622-1
First edition
2008-11-15
Corrected version
2009-07-01

Modular taper interface with ball track
system —
Part 1:
Dimensions and designation of shanks
Interfaces à cône modulaire avec système de serrage à billes —
Partie 1: Dimensions et désignation des queues




Reference number
ISO 26622-1:2008(E)
©
ISO 2008

---------------------- Page: 1 ----------------------
ISO 26622-1:2008(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


COPYRIGHT PROTECTED DOCUMENT


©  ISO 2008
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2008 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 26622-1:2008(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
ISO 26622-1 was prepared by Technical Committee ISO/TC 29, Small tools.
ISO 26622 consists of the following parts, under the general title Modular taper interface with ball track
system:
⎯ Part 1: Dimensions and designation of shanks
⎯ Part 2: Dimensions and designation of receivers
This corrected version of ISO 26622-1:2008 incorporates the following corrections, in the drawings of
Figure 1:
⎯ gauge diameter d
2
⎯ tool changer groove diameter d
3
⎯ ball track dimensioning, related to b , w and d
2 2 9
⎯ flange hole dimensioning, related to l and d
24 13
⎯ taper undercut depth
⎯ divers other corrections in the drawings
© ISO 2008 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 26622-1:2008(E)
Introduction
The modular taper with ball track system design originated from a joint development effort between two
prominent tooling manufacturers in 1985. The benefits to be achieved by the joint development effort were to
offer a complete, but flexible, tooling system–to-machine connection by joining the strengths of two tooling
suppliers for the European and North American markets. The modular taper with ball track system product
was first introduced at EMO (exposition mondiale de la machine-outil) in Milan in 1987.
Since its introduction, this tooling system has become a globally accepted design for both static and rotating
applications. The design characteristics of the modular taper interface with ball track system allow it to be
used equally well on both turning and rotating applications. The high mechanical advantage of the modular
taper with ball track system design application allows for small springs, small bearings and high spindle
speeds. This tool interface uses three areas of contact (one face and two on the taper) that provide a very
simple, but rigid, tool design. These features have made the modular taper with ball track system the
quick-change tooling of choice on many tens of thousands of machine tools throughout the world.
The purpose of this part of ISO 26622 is to ensure compliance of the manufacturing accuracy and quality of
the modular taper with the ball track system tool interface.
The International Organization for Standardization (ISO) draws attention to the fact that it is claimed that
compliance with this document may involve the use of a patent concerning the modular taper with ball track
system.
ISO takes no position concerning the evidence, validity and scope of this patent right.
The holder of this patent right has assured ISO that he/she is willing to waive the exercise of this patent right
throughout the world. In this respect, the statement of the holder of this patent right is registered with ISO.
Information may be obtained from:
ISO Central Secretariat
International Organization for Standardization (ISO)
1, chemin de la Voie-Creuse, Case postale 56
CH-1211 Geneva 20, Switzerland
Attention is drawn to the possibility that some of the elements in this document may be the subject of patent
rights other than that identified above. ISO shall not be held responsible for identifying any or all such patent
rights.

iv © ISO 2008 – All rights reserved

---------------------- Page: 4 ----------------------
INTERNATIONAL STANDARD ISO 26622-1:2008(E)

Modular taper interface with ball track system —
Part 1:
Dimensions and designation of shanks
1 Scope
This part of ISO 26622 specifies the dimensions for modular taper interface with ball track system: tapered
shanks for automatic and manual tool exchange to be applied on machine tools (e.g. lathe machines, drilling
machines, milling machines and turn/milling machine centres). A range of shank sizes is specified, with details
of the coolant-sealing O-ring being given in Annex A.
The shank incorporates a flange with a groove to enable automatic tool exchange. The tools can also be
exchanged manually. The clamping of the shank can be realized by the use of locking balls of a standard size
and by a variety of mechanisms.
The torque is transmitted at the tail end of the shank by friction, locking elements and keys.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition o
...

INTERNATIONAL ISO
STANDARD 26622-1
First edition
2008-11-15

Modular taper interface with ball track
system —
Part 1:
Dimensions and designation of shanks
Interfaces à cône modulaire avec système de serrage à billes —
Partie 1: Dimensions et désignation des queues




Reference number
ISO 26622-1:2008(E)
©
ISO 2008

---------------------- Page: 1 ----------------------
ISO 26622-1:2008(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


COPYRIGHT PROTECTED DOCUMENT


©  ISO 2008
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2008 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 26622-1:2008(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
ISO 26622-1 was prepared by Technical Committee ISO/TC 29, Small tools.
ISO 26622 consists of the following parts, under the general title Modular taper interface with ball track
system:
⎯ Part 1: Dimensions and designation of shanks
⎯ Part 2: Dimensions and designation of receivers
© ISO 2008 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 26622-1:2008(E)
Introduction
The modular taper with ball track system design originated from a joint development effort between two
prominent tooling manufacturers in 1985. The benefits to be achieved by the joint development effort were to
offer a complete, but flexible, tooling system–to-machine connection by joining the strengths of two tooling
suppliers for the European and North American markets. The modular taper with ball track system product
was first introduced at EMO (exposition mondiale de la machine-outil) in Milan in 1987.
Since its introduction, this tooling system has become a globally accepted design for both static and rotating
applications. The design characteristics of the modular taper interface with ball track system allow it to be
used equally well on both turning and rotating applications. The high mechanical advantage of the modular
taper with ball track system design application allows for small springs, small bearings and high spindle
speeds. This tool interface uses three areas of contact (one face and two on the taper) that provide a very
simple, but rigid, tool design. These features have made the modular taper with ball track system the
quick-change tooling of choice on many tens of thousands of machine tools throughout the world.
The purpose of this part of ISO 26622 is to ensure compliance of the manufacturing accuracy and quality of
the modular taper with the ball track system tool interface.
The International Organization for Standardization (ISO) draws attention to the fact that it is claimed that
compliance with this document may involve the use of a patent concerning the modular taper with ball track
system.
ISO takes no position concerning the evidence, validity and scope of this patent right.
The holder of this patent right has assured ISO that he/she is willing to waive the exercise of this patent right
throughout the world. In this respect, the statement of the holder of this patent right is registered with ISO.
Information may be obtained from:
ISO Central Secretariat
International Organization for Standardization (ISO)
1, chemin de la Voie-Creuse, Case postale 56
CH-1211 Geneva 20, Switzerland
Attention is drawn to the possibility that some of the elements in this document may be the subject of patent
rights other than that identified above. ISO shall not be held responsible for identifying any or all such patent
rights.

iv © ISO 2008 – All rights reserved

---------------------- Page: 4 ----------------------
INTERNATIONAL STANDARD ISO 26622-1:2008(E)

Modular taper interface with ball track system —
Part 1:
Dimensions and designation of shanks
1 Scope
This part of ISO 26622 specifies the dimensions for modular taper interface with ball track system: tapered
shanks for automatic and manual tool exchange to be applied on machine tools (e.g. lathe machines, drilling
machines, milling machines and turn/milling machine centres). A range of shank sizes is specified, with details
of the coolant-sealing O-ring being given in Annex A.
The shank incorporates a flange with a groove to enable automatic tool exchange. The tools can also be
exchanged manually. The clamping of the shank can be realized by the use of locking balls of a standard size
and by a variety of mechanisms.
The torque is transmitted at the tail end of the shank by friction, locking elements and keys.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 1101, Geometrical Product Specifications (GPS) — Geometrical tolerancing — Tolerances of form,
orientation, loc
...

NORME ISO
INTERNATIONALE 26622-1
Première édition
2008-11-15
Version corrigée
2009-07-01


Interfaces à cône modulaire avec
système de serrage à billes —
Partie 1:
Dimensions et désignation des queues
Modular taper interface with ball track system —
Part 1: Dimensions and designation of shanks




Numéro de référence
ISO 26622-1:2008(F)
©
ISO 2008

---------------------- Page: 1 ----------------------
ISO 26622-1:2008(F)
PDF – Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier
peut être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence
autorisant l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées
acceptent de fait la responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute
responsabilité en la matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info
du fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir
l'exploitation de ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation,
veuillez en informer le Secrétariat central à l'adresse donnée ci-dessous.


DOCUMENT PROTÉGÉ PAR COPYRIGHT


©  ISO 2008
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous
quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit
de l'ISO à l'adresse ci-après ou du comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Publié en Suisse

ii © ISO 2008 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 26622-1:2008(F)
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux de
normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général confiée
aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire partie du
comité technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec
la Commission électrotechnique internationale (CEI) en ce qui concerne la normalisation électrotechnique.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives ISO/CEI,
Partie 2.
La tâche principale des comités techniques est d'élaborer les Normes internationales. Les projets de Normes
internationales adoptés par les comités techniques sont soumis aux comités membres pour vote. Leur
publication comme Normes internationales requiert l'approbation de 75 % au moins des comités membres
votants.
L'ISO 26622-1 a été élaborée par le comité technique ISO/TC 29, Petit outillage.
L'ISO 26622 comprend les parties suivantes, présentées sous le titre général Interfaces à cône modulaire
avec système de serrage à billes:
⎯ Partie 1: Dimensions et désignation des queues
⎯ Partie 2: Dimensions et désignation des nez de broche
La présente version corrigée de l'ISO 26622-1:2008 inclut les corrections suivantes à la Figure 1:
⎯ diamètre de référence, d ;
2
⎯ diamètre de la cannelure du changement d'outil, d ;
3
⎯ dimensionnement du serrage à billes, relié à b , w et d ;
2 2 9
⎯ dimensionnement du trou de bride, relié à l et d ;
24 13
⎯ profondeur du dégagement du cône;
⎯ diverses autres corrections dans les figures.
© ISO 2008 – Tous droits réservés iii

---------------------- Page: 3 ----------------------
ISO 26622-1:2008(F)
Introduction
En 1985, l’effort commun de développement entre deux fabricants importants d’outils a abouti à la conception
des cônes modulaires avec systèmes de serrage à bille. Les avantages à réaliser par l’effort commun de
développement étaient d’offrir un système de connexion outil-machine complet, mais flexible, en joignant les
efforts de deux fournisseurs d’outils pour le marché européen et nord américain. Les systèmes de cônes
modulaires avec système de serrage à bille ont été introduits pour la première fois en 1987 à l’EMO
(Exposition mondiale de la machine-outil) de Milan.
Depuis cette introduction, ce système d’outil est devenu une conception globalement admise pour les
applications statiques et rotatives. Les caractéristiques de conception des interfaces à cône modulaire à
système de serrage à billes leur permettent d’être utilisés aussi bien pour des applications de tournage et
d’usinage rotatif. Les efforts mécaniques de conception des cônes modulaires à système de serrage à billes
tiennent compte des petits ressorts, des petits roulements à billes et de la grande vitesse des broches. Cette
interface d’outil utilise trois surfaces de contact (une sur une face et deux sur le cône) ce qui procure une
conception de l’outil très simple, mais rigide. Ces caractéristiques ont fait des cônes à système de serrage à
billes un changement d’outil de choix pour des dizaines de milliers de machines-outils dans le monde entier.
L’objet de la présente partie de l’ISO 26622 est d’assurer la conformité de l'exactitude de fabrication et la
qualité des interfaces à cône modulaire à système de serrage à billes.
L’organisation international de normalisation (ISO) attire l'attention sur le fait que la conformité à ce document
peut impliquer l'utilisation d'un brevet concernant le cône modulaire à système de serrage à billes.
L’ISO ne prend pas position en ce qui concerne la preuve, la validité et le domaine d’application de ces droits
de propriété intellectuelle.
Le porteur de ces droits de propriété intellectuelle a assuré l’ISO qu’il est disposé à renoncer à ses droits de
propriété intellectuelle dans le monde. À cet égard, la décision du porteur de ces droits de propriété
intellectuelle est enregistrée à l’ISO. Les informations peuvent être obtenues par:
Secrétariat Central de l’ISO
Organisation internationale de normalisation (ISO)
1, chemin de la Voie-Creuse, Case postale 56
CH-1211 Genève 20, Suisse
L’attention est attirée sur l’éventualité que certains des éléments du présent document peuvent être sujets à
des droits de propriété intellectuelle autres que ceux identifiés ci-dessus. L’ISO ne doit pas être tenue pour
responsable d’avoir identifié de tels droits de propriété intellectuelle.
iv © ISO 2008 – Tous droits réservés

---------------------- Page: 4 ----------------------
NORME INTERNATIONALE ISO 26622-1:2008(F)

Interfaces à cône modulaire avec système de serrage à billes —
Partie 1:
Dimensions et désignation des queues
1 Domaine d'application
La présente partie de l’ISO 26622 spécifie les dimensions des interfaces à cône modulaire à système de
serrage à billes: queues coniques pour changements automatique et manuel d’outil à utiliser sur des
machines-outils (par exemple machines de tournage, machines de perçage, machines de fraisage et
machines de tournage-fraisage). Une gamme de dimensions des queues est spécifiée.
La queue comprend une collerette rainurée permettant le changement automatique de l’outil. Les outils
peuvent également être changés manuellement. Le serrage de la queue peut être réalisé en utilisant des
billes de blocage de dimensions normalisées et divers mécanismes.
Le couple est transmis à l’extrémité de la queue par friction, au moyen d’éléments de verrouillage et au
moyen de rainures d’entraînement.
2 Références normatives
Les documents de référence suivants sont indispensables pour l'application du présent document. Pour les
références datées, seule l'édition citée s'applique.
...

NORME ISO
INTERNATIONALE 26622-1
Première édition
2008-11-15


Interfaces à cône modulaire avec
système de serrage à billes —
Partie 1:
Dimensions et désignation des queues
Modular taper interface with ball track system —
Part 1: Dimensions and designation of shanks




Numéro de référence
ISO 26622-1:2008(F)
©
ISO 2008

---------------------- Page: 1 ----------------------
ISO 26622-1:2008(F)
PDF – Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier
peut être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence
autorisant l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées
acceptent de fait la responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute
responsabilité en la matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info
du fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir
l'exploitation de ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation,
veuillez en informer le Secrétariat central à l'adresse donnée ci-dessous.


DOCUMENT PROTÉGÉ PAR COPYRIGHT


©  ISO 2008
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous
quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit
de l'ISO à l'adresse ci-après ou du comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Publié en Suisse

ii © ISO 2008 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 26622-1:2008(F)
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux de
normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général confiée
aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire partie du
comité technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec
la Commission électrotechnique internationale (CEI) en ce qui concerne la normalisation électrotechnique.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives ISO/CEI,
Partie 2.
La tâche principale des comités techniques est d'élaborer les Normes internationales. Les projets de Normes
internationales adoptés par les comités techniques sont soumis aux comités membres pour vote. Leur
publication comme Normes internationales requiert l'approbation de 75 % au moins des comités membres
votants.
L'ISO 26622-1 a été élaborée par le comité technique ISO/TC 29, Petit outillage.
L'ISO 26622 comprend les parties suivantes, présentées sous le titre général Interfaces à cône modulaire
avec système de serrage à billes:
⎯ Partie 1: Dimensions et désignation des queues
⎯ Partie 2: Dimensions et désignation des nez de broche
© ISO 2008 – Tous droits réservés iii

---------------------- Page: 3 ----------------------
ISO 26622-1:2008(F)
Introduction
En 1985, l’effort commun de développement entre deux fabricants importants d’outils a abouti à la conception
des cônes modulaires avec systèmes de serrage à bille. Les avantages à réaliser par l’effort commun de
développement étaient d’offrir un système de connexion outil-machine complet, mais flexible, en joignant les
efforts de deux fournisseurs d’outils pour le marché européen et nord américain. Les systèmes de cônes
modulaires avec système de serrage à bille ont été introduits pour la première fois en 1987 à l’EMO
(Exposition mondiale de la machine-outil) de Milan.
Depuis cette introduction, ce système d’outil est devenu une conception globalement admise pour les
applications statiques et rotatives. Les caractéristiques de conception des interfaces à cône modulaire à
système de serrage à billes leur permettent d’être utilisés aussi bien pour des applications de tournage et
d’usinage rotatif. Les efforts mécaniques de conception des cônes modulaires à système de serrage à billes
tiennent compte des petits ressorts, des petits roulements à billes et de la grande vitesse des broches. Cette
interface d’outil utilise trois surfaces de contact (une sur une face et deux sur le cône) ce qui procure une
conception de l’outil très simple, mais rigide. Ces caractéristiques ont fait des cônes à système de serrage à
billes un changement d’outil de choix pour des dizaines de milliers de machines-outils dans le monde entier.
L’objet de la présente partie de l’ISO 26622 est d’assurer la conformité de l'exactitude de fabrication et la
qualité des interfaces à cône modulaire à système de serrage à billes.
L’organisation international de normalisation (ISO) attire l'attention sur le fait que la conformité à ce document
peut impliquer l'utilisation d'un brevet concernant le cône modulaire à système de serrage à billes.
L’ISO ne prend pas position en ce qui concerne la preuve, la validité et le domaine d’application de ces droits
de propriété intellectuelle.
Le porteur de ces droits de propriété intellectuelle a assuré l’ISO qu’il est disposé à renoncer à ses droits de
propriété intellectuelle dans le monde. À cet égard, la décision du porteur de ces droits de propriété
intellectuelle est enregistrée à l’ISO. Les informations peuvent être obtenues par:
Secrétariat Central de l’ISO
Organisation internationale de normalisation (ISO)
1, chemin de la Voie-Creuse, Case postale 56
CH-1211 Genève 20, Suisse
L’attention est attirée sur l’éventualité que certains des éléments du présent document peuvent être sujets à
des droits de propriété intellectuelle autres que ceux identifiés ci-dessus. L’ISO ne doit pas être tenue pour
responsable d’avoir identifié de tels droits de propriété intellectuelle.
iv © ISO 2008 – Tous droits réservés

---------------------- Page: 4 ----------------------
NORME INTERNATIONALE ISO 26622-1:2008(F)

Interfaces à cône modulaire avec système de serrage à billes —
Partie 1:
Dimensions et désignation des queues
1 Domaine d'application
La présente partie de l’ISO 26622 spécifie les dimensions des interfaces à cône modulaire à système de
serrage à billes: queues coniques pour changements automatique et manuel d’outil à utiliser sur des
machines-outils (par exemple machines de tournage, machines de perçage, machines de fraisage et
machines de tournage-fraisage). Une gamme de dimensions des queues est spécifiée.
La queue comprend une collerette rainurée permettant le changement automatique de l’outil. Les outils
peuvent également être changés manuellement. Le serrage de la queue peut être réalisé en utilisant des
billes de blocage de dimensions normalisées et divers mécanismes.
Le couple est transmis à l’extrémité de la queue par friction, au moyen d’éléments de verrouillage et au
moyen de rainures d’entraînement.
2 Références normatives
Les documents de référence suivants sont indispensables pour l'application du présent document. Pour les
références datées, seule l'édition citée s'applique. Pour les références non datées, la dernière édition du
document de référence s'applique (y compris les éventuels amendements).
ISO 1101, Spécification géométrique des produits (GPS) — Tolérancement géométr
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.