ISO 21094:2008
(Main)Optics and photonics — Telescopic systems — Specifications for night vision devices
Optics and photonics — Telescopic systems — Specifications for night vision devices
ISO 21094:2008 applies to night vision devices such as binoculars, monoculars and goggles that are used for observation activities at night such as rescue actions under low light conditions, urgent repairs in the dark and night time surveillance.
Optique et photonique — Systèmes télescopiques — Spécifications pour dispositifs de vision de nuit
General Information
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 21094
First edition
2008-02-15
Optics and photonics — Telescopic
systems — Specifications for night vision
devices
Optique et photonique — Systèmes télescopiques — Spécifications
pour dispositifs de vision de nuit
Reference number
ISO 21094:2008(E)
©
ISO 2008
---------------------- Page: 1 ----------------------
ISO 21094:2008(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
COPYRIGHT PROTECTED DOCUMENT
© ISO 2008
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2008 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 21094:2008(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 21094 was prepared by Technical Committee ISO/TC 172, Optics and photonics, Subcommittee SC 4,
Telescopic systems.
© ISO 2008 – All rights reserved iii
---------------------- Page: 3 ----------------------
INTERNATIONAL STANDARD ISO 21094:2008(E)
Optics and photonics — Telescopic systems — Specifications
for night vision devices
1 Scope
This International Standard applies to night vision devices such as binoculars, monoculars and goggles that
are used for observation activities at night such as rescue actions under low light conditions, urgent repairs in
the dark and night time surveillance.
The International Standard does not cover thermal imaging technology.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 14132-1, Optics and optical instruments — Vocabulary for telescopic systems — Part 1: General terms
and alphabetical indexes of terms in ISO 14132
ISO 14132-2, Optics and optical instruments — Vocabulary for telescopic systems — Part 2: Terms for
binoculars, monoculars and spotting scopes
1)
ISO 14132-5 , Optics and optical instruments — Vocabulary for telescopic systems — Part 5: Terms for night
vision devices
1)
ISO 14490-8 , Optics and photonics — Test methods for telescopic systems — Part 8: Test methods for
night-vision devices
3 Terms and definitions
For terms and definitions that apply to night vision devices refer to ISO 14132-5.
For terms and definitions and reference of letter symbols that apply to telescopic systems in general refer to
ISO 14132-1.
For terms and definitions th
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.