Coal — Determination of bulk density for the use in charging of coke ovens

ISO 23499:2013 provides description of a cone procedure for determining an uncompacted bulk density of crushed coal less than 37 mm in size, such as is charged into coke ovens. It focuses on the uncompacted bulk density of coal resulting from flowing the material into a measuring container (box) in the absence of compacting forces. ISO 23499:2013 does not cover procedures for determining a compacted coal bulk density nor to the testing of fine or powdered coal (for boiler or utility application) nor to the determination of bulk density of coal in storage piles.

Charbon — Détermination de la masse volumique en vrac à des fins d'enfournement dans les fours à coke

General Information

Status
Published
Publication Date
21-Jul-2013
Current Stage
9060 - Close of review
Start Date
04-Jun-2029
Ref Project

Relations

Buy Standard

Standard
ISO 23499:2013 - Coal -- Determination of bulk density for the use in charging of coke ovens
English language
6 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 23499
Second edition
2013-07-01
Coal — Determination of bulk density
for the use in charging of coke ovens
Charbon — Détermination de la masse volumique en vrac à des fins
d’enfournement dans les fours à coke
Reference number
ISO 23499:2013(E)
©
ISO 2013

---------------------- Page: 1 ----------------------
ISO 23499:2013(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 23499:2013(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normatives references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Samples and apparatus . 1
5.1 General . 1
5.2 Apparatus . 2
6 Sampling . 2
6.1 Test portion for bulk density . 2
6.2 Test sample . 2
7 Procedure. 2
8 Expression of results . 4
9 Reporting of results . 5
10 Precision . 5
10.1 Repeatability . 5
10.2 Reproducibility .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.