iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO/FDIS 16961

(Main)

Oil and gas industries including lower carbon energy — Internal coating and lining of steel storage tanks

Oil and gas industries including lower carbon energy — Internal coating and lining of steel storage tanks

Industries du pétrole et du gaz y compris les énergies à faible teneur en carbone — Revêtement intérieur et doublure interne des réservoirs de stockage en acier

General Information

Status
Not Published
ICS
75.200 - Petroleum products and natural gas handling equipment
Technical Committee
ISO/TC 67 - Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
Drafting Committee
ISO/TC 67/WG 11 - Coating and lining of structures and equipment
Current Stage
5020 - FDIS ballot initiated: 2 months. Proof sent to secretariat
Start Date
16-Feb-2024
Completion Date
16-Feb-2024
Ref Project

Relations

Consolidates
ISO 8222:2020 - Petroleum measurement systems — Calibration — Volumetric measures, proving tanks and field measures (including formulae for properties of liquids and materials)
Effective Date
06-Jun-2022
Revises
ISO 16961:2015 - Petroleum, petrochemical and natural gas industries — Internal coating and lining of steel storage tanks
Effective Date
23-Apr-2020

Buy Standard

ISO/FDIS 16961 - Oil and gas industries including lower carbon energy — Internal coating and lining of steel storage tanks Released:2. 02. 2024ISO/FDIS 16961 - Oil and gas industries including lower carbon energy — Internal coating and lining of steel storage tanks Released:2. 02. 2024
PreviousNext
Draft
ISO/FDIS 16961 - Oil and gas industries including lower carbon energy — Internal coating and lining of steel storage tanks Released:2. 02. 2024
English language
35 pages
sale 15% off
Preview
sale 15% off
Preview
REDLINE ISO/FDIS 16961 - Oil and gas industries including lower carbon energy — Internal coating and lining of steel storage tanks Released:2. 02. 2024REDLINE ISO/FDIS 16961 - Oil and gas industries including lower carbon energy — Internal coating and lining of steel storage tanks Released:2. 02. 2024
PreviousNext
Draft
REDLINE ISO/FDIS 16961 - Oil and gas industries including lower carbon energy — Internal coating and lining of steel storage tanks Released:2. 02. 2024
English language
35 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

FINAL DRAFT
International
Standard
ISO/FDIS 16961
ISO/TC 67
Oil and gas industries including
Secretariat: NEN
lower carbon energy — Internal
Voting begins on:
coating and lining of steel storage
2024-02-16
tanks
Voting terminates on:
2024-04-12
Industries du pétrole et du gaz y compris les énergies à faible
teneur en carbone - Revêtement intérieur et doublure interne des
réservoirs de stockage en acier
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO­
ISO/CEN PARALLEL PROCESSING LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
Reference number
ISO/FDIS 16961:2024(en) © ISO 2024

---------------------- Page: 1 ----------------------
FINAL DRAFT
ISO/FDIS 16961:2024(en)
International
Standard
ISO/FDIS 16961
ISO/TC 67
Oil and gas industries including
Secretariat: NEN
lower carbon energy — Internal
Voting begins on:
coating and lining of steel storage
tanks
Voting terminates on:
Industries du pétrole et du gaz y compris les énergies à faible
teneur en carbone - Revêtement intérieur et doublure interne des
réservoirs de stockage en acier
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
COPYRIGHT PROTECTED DOCUMENT
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
© ISO 2024
IN ADDITION TO THEIR EVALUATION AS
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO­
ISO/CEN PARALLEL PROCESSING
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
or ISO’s member body in the country of the requester.
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/FDIS 16961:2024(en) © ISO 2024

© ISO 2024 – All rights reserved
ii

---------------------- Page: 2 ----------------------
ISO/FDIS 16961:2024(en)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms, definitions and abbreviated terms . 3
3.1 Terms and definitions .3
3.2 Abbreviated terms .5
4 Conformance . 6
4.1 Rounding .6
4.2 Conformance to this document .
...

2023-11-21
ISO/FDIS 16961:2023(E)
ISO/TC 67/WG 11
Secretariat: NEN
Petroleum, petrochemical,Date: 2024-02-02
Oil and natural gas industries including lower carbon energy —
Internal coating and lining of steel storage tanks
Industries du pétrole et du gaz y compris les énergies à faible teneur en carbone - Revêtement intérieur et
doublure interne des réservoirs de stockage en acier
FDIS stage
© ISO 2023 – All rights reserved

---------------------- Page: 1 ----------------------
ISO/FDIS 19691:2023(E)
© ISO 2022 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this
publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical,
including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can
be requested from either ISO at the address below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
EmailE-mail: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/FDIS 16961:2023(E)
Contents
Foreword . v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms, definitions and abbreviated terms . 3
3.1 Terms and definitions . 4
3.2 Abbreviated terms . 6
4 Conformance . 7
4.1 Rounding . 7
4.2 Conformance to this document . 7
5 Pre-work requirements . 7
5.1 General . 7
5.2 Safety precautions in flammable atmosphere . 7
5.3 Qualification of coating/lining application and inspection personnel . 8
5.4 Positive isolation and ventilation . 8
6 Coating/lining materials . 8
6.1 General . 8
6.2 Approvals . 9
6.3 Prequalification of coating/lining system. 9
6.4 Holding (blast) primer . 9
6.5 Caulking (putty) and filler compounds .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 19277:2018(Main)
Petroleum, petrochemical and natural gas industries — Qualification testing and acceptance criteria for protective coating systems under insulation

This document describes various corrosion under insulation (CUI) environments in refineries and other related industries and environments, and establishes CUI environmental categories including operating temperature ranges from −45 °C to 204 °C for topside and aboveground service only. This document specifies both established and other test methods for the assessment of coatings used for prevention of CUI for each given environment. This document also provides acceptance criteria for each CUI environment. NOTE The test results and acceptance criteria can be considered an aid in the selection of suitable coating systems. For service or peak temperatures below −45 °C an optional cryogenic test can be incorporated and for over 204 °C testing acceptance criteria can be agreed between interested parties. Additional or other test and acceptance measures are possible, but require particular agreement between the interested parties. This document covers spray-applied coatings applied on new carbon and austenitic stainless steel for use in CUI service. This document does not cover testing of sacrificial coatings, such as inorganic zinc, as these coatings can be consumed quickly in wet environments. Developing accelerated corrosion testing for what can be continuous wet service with sacrificial coatings is beyond the scope of this document. "Non-through porosity" thermal spray aluminium coatings with greater than 250 µm dry film thickness can be tested and qualified in accordance with this document. This document does not cover tape and sheet applied products for use in preventing CUI. This document does not deal with other aspects of coating degradation, such as those caused by abrasion, erosion, ultraviolet degradation or other methods that can exist given specific environment and construction methods.

  • Standard
    27 pages
    English language
    sale 15% off
ISO
ISO 20815:2018(Main)
Petroleum, petrochemical and natural gas industries — Production assurance and reliability management

This document describes the concept of production assurance within the systems and operations associated with exploration drilling, exploitation, processing and transport of petroleum, petrochemical and natural gas resources. This document covers upstream (including subsea), midstream and downstream facilities, petrochemical and associated activities. It focuses on production assurance of oil and gas production, processing and associated activities and covers the analysis of reliability and maintenance of the components. This includes a variety of business categories and associated systems/equipment in the oil and gas value chain. Production assurance addresses not only hydrocarbon production, but also associated activities such as drilling, pipeline installation and subsea intervention. This document provides processes and activities, requirements and guidelines for systematic management, effective planning, execution and use of production assurance and reliability technology. This is to achieve cost-effective solutions over the life cycle of an asset development project structured around the following main elements: — production assurance management for optimum economy of the facility through all of its life cycle phases, while also considering constraints arising from health, safety, environment, and quality; — planning, execution and implementation of reliability technology; — application of reliability and maintenance data; — reliability-based technology development, design and operational improvement. The IEC 60300-3 series addresses equipment reliability and maintenance performance in general. This document designates 12 processes, of which seven are defined as core production assurance processes and addressed in this document. The remaining five processes are denoted as interacting processes and are outside the scope of this document. The interaction of the core production assurance processes with these interacting processes, however, is within the scope of this document as the information flow to and from these latter processes is required to ensure that production assurance requirements can be fulfilled. The only requirement mandated by this document is the establishment and execution of the production assurance programme (PAP). It is important to reflect the PAP in the overall project management in the project for which it applies. This document recommends that the listed processes and activities be initiated only if they can be considered to add value.

  • Standard
    99 pages
    English language
    sale 15% off
  • Standard
    107 pages
    French language
    sale 15% off
ISO
ISO 14224:2016(Main)
Petroleum, petrochemical and natural gas industries — Collection and exchange of reliability and maintenance data for equipment

ISO 14224:2016 provides a comprehensive basis for the collection of reliability and maintenance (RM) data in a standard format for equipment in all facilities and operations within the petroleum, natural gas and petrochemical industries during the operational life cycle of equipment. It describes data collection principles and associated terms and definitions that constitute a "reliability language" that can be useful for communicating operational experience. The failure modes defined in the normative part of this International Standard can be used as a "reliability thesaurus" for various quantitative as well as qualitative applications. This International Standard also describes data quality control and assurance practices to provide guidance for the user. Standardization of data collection practices facilitates the exchange of information between parties, e.g. plants, owners, manufacturers and contractors. This International Standard establishes requirements that any in-house or commercially available RM data system is required to meet when designed for RM data exchange. Examples, guidelines and principles for the exchange and merging of such RM data are addressed. This International Standard also provides a framework and guidelines for establishing performance objectives and requirements for equipment reliability and availability performance. Annex A contains a summary of equipment that is covered by this International Standard. ISO 14224:2016 defines a minimum amount of data that is required to be collected, and it focuses on two main issues: - data requirements for the categories of data to be collected for use in various analysis methodologies; - standardized data format to facilitate the exchange of reliability and maintenance data between plants, owners, manufacturers and contractors. The following main categories of data are to be collected: a) equipment data, e.g. equipment taxonomy, equipment attributes; b) failure data, e.g. failure cause, failure consequence; c) maintenance data, e.g. maintenance action, resources used, maintenance consequence, down time. NOTE Clause 9 gives further details on data content and data format. The main areas where such data are used are the following: 1) reliability, e.g. failure events and failure mechanisms; 2) availability/efficiency, e.g. equipment availability, system availability, plant production availability; 3) maintenance, e.g. corrective and preventive maintenance, maintenance plan, maintenance supportability; 4) safety and environment, e.g. equipment failures with adverse consequences for safety and/or environment. ISO 14224:2016 does not apply to the following: i. data on (direct) cost issues; ii. data from laboratory testing and manufacturing (e.g. accelerated lifetime testing), see also 5.2; iii. complete equipment data sheets (only data seen relevant for assessing the reliability performance are included); iv. additional on-service data that an operator, on an individual basis, can consider useful for operation and maintenance; v. methods for analysing and applying RM data (however, principles for how to calculate some basic reliability and maintenance parameters are included in the annexes).

  • Standard
    272 pages
    English language
    sale 15% off
  • Standard
    272 pages
    English language
    sale 15% off
  • Standard
    285 pages
    French language
    sale 15% off
ISO
ISO 16961:2015(Main)
Petroleum, petrochemical and natural gas industries — Internal coating and lining of steel storage tanks

ISO 16961:2015 specifies the minimum requirements for surface preparation, materials, application, inspection and testing of internal coating lining systems that are intended to be applied on internal surfaces of steel storage tanks of crude oil, hydrocarbons and water for corrosion protection. It covers both new construction and maintenance works of tank internal coating and lining as well as the repair of defective and deteriorated systems. ISO 16961:2015 also provides the minimum requirements for shop performance testing of the coated/lined samples and the criteria for their approval.

  • Standard
    38 pages
    English language
    sale 15% off
  • Standard
    40 pages
    French language
    sale 15% off
ISO
ISO/TR 12489:2013(Main)
Petroleum, petrochemical and natural gas industries — Reliability modelling and calculation of safety systems

ISO/TR 12489:2013 aims to close the gap between the state-of-the-art and the application of probabilistic calculations for the safety systems of the petroleum, petrochemical and natural gas industries. It provides guidelines for reliability and safety system analysts and the oil and gas industries. The elementary approaches (e.g. PHA, HAZID, HAZOP, FMECA) are out of the scope of ISO/TR 12489:2013. Yet they are of utmost importance as their results provide the input information essential to properly undertake the implementation of the approaches described in ISO/TR 12489:2013: analytical formulae, Boolean approaches (reliability block diagrams, fault trees, event trees, etc.), Markov graphs and Petri nets. ISO/TR 12489:2013 is focused on probabilistic calculations of random failures and, therefore, the non-random failures are out of the scope even if, to some extent, they are partly included into the reliability data collected from the field.

  • Technical report
    261 pages
    English language
    sale 15% off
ISO
ISO/FDIS 3845(Main)
Oil and gas industries including lower carbon energy — Full ring ovalization test method for the evaluation of the cracking resistance of steel line pipe in sour service
  • Draft
    53 pages
    English language
    sale 15% off
  • Draft
    53 pages
    English language
    sale 15% off
ISO
ISO 4437-5:2024(Main)
Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 5: Fitness for purpose of the system

This document specifies the requirements of fitness for purpose of assembled polyethylene (PE) piping systems in the field of the supply of gaseous fuels. It specifies the requirements for electrofusion, socket fusion, butt fusion and mechanical joints. It specifies the method of preparation of test piece joints and the tests to be carried out on these joints for assessing the fitness for purpose of the system under normal and extreme conditions. It specifies the test parameters for the test methods referred to in this document. This document is intended to be used only by the product manufacturer and test laboratories to assess the performance of components in accordance with ISO 4437-2, ISO 4437-3 and ISO 4437-4 when joined together under normal and extreme conditions in accordance with this document. It is not intended for on-site testing of pipe systems. In conjunction with ISO 4437-1, ISO 4437-2, ISO 4437-3 and ISO 4437-4, this document is applicable to PE pipes, fittings and valves, their joints, and joints with components of PE and other materials intended to be used under the following conditions: a) a maximum operating pressure (MOP), up to and including 10 bar[1], at a reference temperature of 20 °C for design purposes; b) an operating temperature between −20 °C and 40 °C. For operating temperatures between 20 °C and 40 °C, derating coefficients are defined in Annex A. The ISO 4437 series covers a range of MOPs and gives requirements concerning colours. [1] 1 bar = 0,1 MPa = 105 Pa; 1 MPa = 1 N/mm2.

  • Standard
    14 pages
    English language
    sale 15% off
  • Draft
    14 pages
    English language
    sale 15% off
  • Draft
    14 pages
    English language
    sale 15% off
ISO
ISO 4437-2:2024(Main)
Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 2: Pipes

This document specifies the characteristics of pipes made from polyethylene (PE) for piping systems in the field of the supply of gaseous fuels. It also specifies the test parameters for the test methods referred to in this document. In conjunction with ISO 4437-1, ISO 4437-3, ISO 4437-4 and ISO 4437-5, this document is applicable to PE pipes, fittings and valves, their joints, and joints with components of PE and other materials intended to be used under the following conditions: a) a maximum operating pressure (MOP), up to and including 10 bar[1], at a reference temperature of 20 °C for design purposes; b) an operating temperature between −20 °C and 40 °C. For operating temperatures between 20 °C and 40 °C, derating coefficients are defined in ISO 4437-5. The ISO 4437 series covers a range of MOPs and gives requirements concerning colours. This document is applicable to three types of pipes: — PE pipes (outside diameter, dn) including any identification stripes; — PE pipes with co-extruded layers on either or both the outside and/or inside of the pipe (total outside diameter, dn) as specified in Annex A, where all PE layers have the same MRS rating; — PE pipes (outside diameter, dn) with a peelable and contiguous thermoplastics additional layer on the outside of the pipe ("coated pipe") as specified in Annex B. It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects, taking into account their particular requirements and any relevant national regulations and installation practices or codes. [1] 1 bar = 0,1 MPa = 105 Pa; 1 MPa = 1 N/mm2.

  • Standard
    23 pages
    English language
    sale 15% off
  • Draft
    25 pages
    English language
    sale 15% off
  • Draft
    25 pages
    English language
    sale 15% off
ISO
ISO 4437-1:2024(Main)
Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 1: General

This document specifies materials and the general aspects of polyethylene (PE) piping systems in the field of the supply of gaseous fuels. It also specifies the test parameters for the test methods referred to in this document. In conjunction with ISO 4437-2, ISO 4437-3, ISO 4437-4 and ISO 4437-5, this document is applicable to PE pipes, fittings and valves, their joints, and joints with components of PE and other materials intended to be used under the following conditions: a) a maximum operating pressure (MOP) up to and including 10 bar[1], at a reference temperature of 20 °C for design purposes; b) an operating temperature between −20 °C and 40 °C. For operating temperatures between 20 °C and 40 °C, derating coefficients are defined in ISO 4437-5. The ISO 4437 series covers a range of MOPs and gives requirements concerning colours. It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects, taking into account their particular requirements and any relevant national regulations and installation practices or codes. [1] 1 bar = 0,1 MPa = 105 Pa; 1 MPa = 1 N/mm2.

  • Standard
    20 pages
    English language
    sale 15% off
  • Draft
    20 pages
    English language
    sale 15% off
  • Draft
    20 pages
    English language
    sale 15% off
ISO
ISO 4437-3:2024(Main)
Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 3: Fittings

This document specifies the characteristics of fusion fittings made from polyethylene (PE) as well as of mechanical fittings for piping systems in the field of the supply of gaseous fuels. It also specifies the test parameters for the test methods referred to in this document. In conjunction with ISO 4437-1, ISO 4437-2, ISO 4437-4 and ISO 4437-5, this document is applicable to PE pipes, fittings and valves, their joints, and joints with components of PE and other materials intended to be used under the following conditions: a) a maximum operating pressure (MOP), up to and including 10 bar[1], at a reference temperature of 20 °C for design purposes; b) an operating temperature between −20 °C and 40 °C. For operating temperatures between 20 °C and 40 °C, derating coefficients are defined in ISO 4437-5. The ISO 4437 series covers a range of maximum operating pressures and gives requirements concerning colours. It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects, taking into account their particular requirements and any relevant national regulations and installation practices or codes. This document is applicable for fittings of the following types: — electrofusion socket fittings; — electrofusion saddle fittings; — spigot end fittings (for butt fusion using heated tools and electrofusion socket fusion); — socket fusion fittings; — mechanical fittings. NOTE 1 The fittings can be, for example, in the form of couplers, saddles, equal and reduced tees, reducers, elbows, bends or end caps. NOTE 2 Fabricated fittings are normally not used for gas applications except for larger dimensions or in the absence of other solutions. Guidance can be found in ISO 4427-3:2019, Annex B. [1] 1 bar = 0,1 MPa = 105 Pa; 1 MPa = 1 N/mm2.

  • Standard
    35 pages
    English language
    sale 15% off
  • Draft
    35 pages
    English language
    sale 15% off
  • Draft
    35 pages
    English language
    sale 15% off