Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 4: Polycarbonate (PC) moulding and extrusion materials

Plastiques — Détermination de la viscosité des polymères en solution diluée à l'aide de viscosimètres à capillaires — Partie 4: Matériaux polycarbonates (PC) pour moulage et extruction

Polimerni materiali - Določanje viskoznostnega števila in mejnega viskoznostnega števila - 4. del: Polikarbonatni materiali (PC) za oblikovanje in ekstrudiranje

General Information

Status

Replaced

Publication Date

18-Jun-1986

Withdrawal Date

18-Jun-1986

ICS

83.080.20 - Thermoplastic materials

Technical Committee

ISO/TC 61/SC 9 - Thermoplastic materials

Drafting Committee

ISO/TC 61/SC 9/WG 15 - Polycarbonate

Current Stage

9599 - Withdrawal of International Standard

Completion Date

11-Mar-1999

Ref Project

SIST ISO 1628-4:1996 - Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 4: Polycarbonate (PC) moulding and extrusion materials

Relations

Revised

ISO 1628-4:1999 - Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 4: Polycarbonate (PC) moulding and extrusion materials

Effective Date

15-Apr-2008

Buy Standard

Standard

ISO 1628-4:1996

English language

5 pages

sale 10% off

Preview

sale 10% off

Preview

e-Library read for

1 day

Standards Content (Sample)

ISO 1628-4:1996

SLOVENSKI STANDARD
SIST ISO 1628-4:1996
01-junij-1996
3ROLPHUQLPDWHULDOL'RORþDQMHYLVNR]QRVWQHJDãWHYLODLQPHMQHJDYLVNR]QRVWQHJD
ãWHYLODGHO3ROLNDUERQDWQLPDWHULDOL3&]DREOLNRYDQMHLQHNVWUXGLUDQMH
Plastics -- Determination of the viscosity of polymers in dilute solution using capillary
viscometers -- Part 4: Polycarbonate (PC) moulding and extrusion materials
Plastiques -- Détermination de la viscosité des polymères en solution diluée à l'aide de
viscosimètres à capillaires -- Partie 4: Matériaux polycarbonates (PC) pour moulage et
extruction
Ta slovenski standard je istoveten z: ISO 1628-4:1986
ICS:
83.080.10 Duromeri Thermosetting materials
83.080.20 Plastomeri Thermoplastic materials
SIST ISO 1628-4:1996 en
2003-01.Slovenski inštitut za stand
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO

ISO 4504:2023(Main)

Plastics — Polyethylene (PE) — Determination of co-monomer content by solution state 13C-NMR spectrometry

This document specifies two methods for the determination of co-monomer contents of polyethylene products by solution state 13C-NMR spectrometry (nuclear magnetic resonance spectrometry): — method A: inverse gated decoupling method. — method B: insensitive nuclei enhanced by polarization transfer method; This document is applicable to copolymers of ethylene having a content of other 1-olefinic monomers of less than a mass fraction of 50 %. This document is not applicable to ethylene homopolymers or copolymers in which ethylene is polymerized with two or more type 1-olefin comonomers.

Standard
25 pages
English language
sale 15% off
Draft
25 pages
English language
sale 15% off

ISO

ISO 293:2023(Main)

Plastics — Compression moulding of test specimens of thermoplastic materials

This document specifies the general principles and the procedures to be followed with thermoplastics in the preparation of compression-moulded test specimens, and sheets from which test specimens can be machined or stamped. NOTE In order to obtain mouldings in a reproducible state, the main steps of the procedure, including eight different cooling methods, are standardized. For each material, the required moulding temperature and cooling methods are given in the appropriate International Standard for the material or as agreed between the interested parties. This document is not applicable to reinforced thermoplastics.

Standard
7 pages
English language
sale 15% off
Standard
8 pages
French language
sale 15% off
Draft
7 pages
English language
sale 15% off
Draft
7 pages
English language
sale 15% off
Draft
10 pages
French language
sale 15% off

ISO

ISO 11337:2023(Main)

Plastics — Polyamides — Determination of ε-caprolactam and ω-laurolactam by gas chromatography

This document specifies a method for determining ε‑caprolactam and ω‑laurolactam in polyamides by gas chromatography. It is applicable particularly to the determination of ε‑caprolactam in polyamide 6 and ω‑laurolactam in polyamide 12. Two variants of the basic method are specified. — Method A is an extraction method with boiling methanol, and the extract is injected into a gas chromatograph. — Method B is a method using a solvent, and the solution is injected into a gas chromatograph.

Standard
11 pages
English language
sale 15% off
Standard
12 pages
French language
sale 15% off
Draft
11 pages
English language
sale 15% off
Draft
11 pages
English language
sale 15% off
Draft
14 pages
French language
sale 15% off

ISO

ISO 24048:2022(Main)

Plastics — Determination of bound acrylonitrile content in the continuous phase of acrylonitrile-butadiene-styrene (ABS) by Dumas combustion method

This document specifies a method for the determination of bound acrylonitrile content in the continuous phase of acrylonitrile-butadiene-styrene (ABS) copolymer using Dumas combustion method. This document is applicable to ABS resin with a mass fraction of bound acrylonitrile content in continuous phase between 5 % and 50 %.

Standard
8 pages
English language
sale 15% off

ISO

ISO 16396-1:2022(Main)

Plastics — Polyamide (PA) moulding and extrusion materials — Part 1: Designation system and basis for specifications

This document establishes a system of designation for polyamide (PA) moulding and extrusion materials, which can be used as the basis for specifications. The types of polyamide plastics are differentiated from each other by a classification system based on appropriate levels of the designatory properties a) viscosity number, b) tensile modulus, and c) nucleating additive, and on information about composition, intended application and/or method of processing, important properties, additives, colorants, fillers, and reinforcing materials. The designation system is applicable to all polyamide homopolymers, copolymers, and blends. It is applicable to unmodified materials ready for normal use and materials modified, for example, by colorants, additives, fillers, reinforcing materials, and polymer modifiers. This document does not apply to the following materials: — monomer casting-type polyamides of PA 6; — monomer casting-type polyamides of PA 12. It is not intended to imply that materials having the same designation give the same performance. This document does not provide engineering data, performance data, or data on processing conditions which can be required to specify a material. If such additional properties are required, they can be determined according to the test methods specified in ISO 16396-2, if suitable. In order to specify a thermoplastic material for a particular application, additional requirements can be given in data block 5 (see 4.1).

Standard
16 pages
English language
sale 15% off
Standard
19 pages
French language
sale 15% off

ISO

ISO 16396-2:2022(Main)

Plastics — Polyamide (PA) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties

This document specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of polyamide moulding and extrusion materials. It gives the requirements for handling test material and for conditioning both the test material before moulding and the specimens before testing. This document specifies procedures and conditions for the preparation of test specimens and procedures for measuring properties of the materials from which these specimens are made are given. It lists the properties and test methods that are suitable and necessary to characterize polyamide moulding and extrusion materials. The properties have been selected from the general test methods in ISO 10350‑1. Other test methods in wide use for, or of particular significance to, these moulding and extrusion materials are also included in this document, as are the designatory properties viscosity number and tensile modulus given in ISO 16396‑1.

Standard
10 pages
English language
sale 15% off
Standard
11 pages
French language
sale 15% off

ISO

ISO 8985:2022(Main)

Plastics — Ethylene/vinyl acetate copolymer (EVAC) thermoplastics — Determination of vinyl acetate content

This document specifies two categories of method for the determination of the vinyl acetate (VAC) content of ethylene/vinyl acetate (EVAC) copolymer, for use in the designation of such copolymers according to ISO 21301-1. One category is referred to as “reference methods”, the other as “test methods”. The “reference methods” are used to calibrate the method used for the determination of the vinyl acetate content of ethylene/vinyl acetate copolymers. The “test methods” are other methods which can be used for the determination if they are calibrated using one of the reference methods described in Clause 4, provided they show a certain permissible repeatability.

Standard
24 pages
English language
sale 15% off
Standard
24 pages
English language
sale 15% off
Standard
24 pages
French language
sale 15% off
Standard
24 pages
French language
sale 15% off
Draft
23 pages
English language
sale 15% off
Draft
23 pages
French language
sale 15% off

ISO

ISO 24047:2021(Main)

Plastics — Polyethylene (PE) and polypropylene (PP) thermoplastics — Determination of metal content by ICP-OES

This document specifies a method for the determination of metal content in polyethylene (PE) and polypropylene (PP) by inductively coupled plasma optical emission spectrometry (ICP-OES). This document is applicable to the determination of the content of magnesium (Mg), aluminium (Al), calcium (Ca), zinc (Zn), chromium (Cr), titanium (Ti), iron (Fe), antimony (Sb), copper (Cu), lead (Pb), cadmium (Cd), etc. This document is not applicable to the determination of mercury (Hg) due to its volatility. This method is suitable for base polymers of PE, PP, PE/PP copolymer and their blends.

Standard
9 pages
English language
sale 15% off
Draft
9 pages
English language
sale 15% off

ISO

ISO 24024-1:2021(Main)

Plastics — Homopolymer and copolymer resins of vinyl chloride — Part 1: Designation system and basis for specifications

1.1 This document establishes a system of designation for vinyl chloride thermoplastic resins which can be used as the basis for specifications. 1.2 The types of vinyl chloride plastics are differentiated from each other by a classification system based on appropriate levels of the designatory properties: a) reduced viscosity; b) apparent density; c) retention on a 63 µm mesh sieve; d) plasticizer absorption at room temperature (for general-purpose resins); e) the viscosity and the type of rheological behaviour of a standard paste (for paste resins only); and on information about basic polymer parameters, polymerization processes and intended applications. 1.3 This document is applicable to resins in powder form which consist of homopolymers of the monomer vinyl chloride and copolymers, terpolymers, etc., of vinyl chloride with one or more other monomers, but where vinyl chloride is the main constituent. The resins can contain small amounts of non-polymerized substances (e.g. emulsifying or suspending agents, catalyst residues, etc.) and other substances added during the course of polymerization. 1.4 It is not intended to imply that materials having the same designation give necessarily the same performance. This document does not provide engineering data, performance data or data on processing conditions which can be required to specify a material for a particular application and/or method of processing. If such additional properties are required, they are determined in accordance with the test methods specified in ISO 24024-2, if suitable. 1.5 In order to specify a resin for a particular application or to ensure reproducible processing, additional requirements can be given in data block 5 (see 4.1).

Standard
9 pages
English language
sale 15% off
Standard
9 pages
French language
sale 15% off
Draft
9 pages
English language
sale 15% off
Draft
11 pages
French language
sale 15% off

ISO

ISO 24024-2:2021(Main)

Plastics — Homopolymer and copolymer resins of vinyl chloride — Part 2: Preparation of test samples and determination of properties

This document specifies the methods of preparation of test samples and the test methods to be used in determining the properties of PVC resins. Requirements for handling test material and for conditioning the material before testing are given here. In addition, properties and test methods which are suitable and necessary to characterize PVC resins are listed.

Standard
4 pages
English language
sale 15% off
Standard
4 pages
French language
sale 15% off
Draft
4 pages
English language
sale 15% off
Draft
5 pages
French language
sale 15% off