Telecommunications and exchange between information technology systems — Requirements for local and metropolitan area networks — Part 3: Standard for Ethernet — Amendment 3: Media access control parameters for 50 Gb/s and physical layers and management parameters for 50 Gb/s, 100 Gb/s, and 200 Gb/s operation

Télécommunications et échange entre systèmes informatiques — Exigences pour les réseaux locaux et métropolitains — Partie 3: Norme pour Ethernet — Amendement 3: Paramètres de commande d'accès media pour 50 Gb/s et couches physiques et paramètres de gestion pour fonctionnement à 50 Gb/s, 100 Gb/s et 200 Gb/s

General Information

Status
Published
Publication Date
22-Dec-2021
Current Stage
6060 - International Standard published
Start Date
23-Dec-2021
Due Date
02-Nov-2022
Completion Date
23-Dec-2021
Ref Project

Relations

Buy Standard

Draft
ISO/IEC/IEEE 8802-3:2021/FDAmd 3 - Media access control parameters for 50 Gb/s and physical layers and management parameters for 50 Gb/s, 100 Gb/s, and 200 Gb/s operation
English language
365 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

FINAL
ISO/IEC/IEEE
AMENDMENT
DRAFT
8802-3:2021
FDAM 3
ISO/IEC JTC 1/SC 6
Telecommunications and exchange
Secretariat: KATS
between information technology
Voting begins on:
2021-06-24 systems — Requirements for local and
metropolitan area networks —
Voting terminates on:
2021-11-11
Part 3:
Standard for Ethernet
AMENDMENT 3: Media access control
parameters for 50 Gb/s and physical
layers and management parameters
for 50 Gb/s, 100 Gb/s, and 200 Gb/s
operation
Télécommunications et échange entre systèmes informatiques —
Exigences pour les réseaux locaux et métropolitains —
Partie 3: Norme pour Ethernet
AMENDEMENT 3
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/IEC/IEEE 8802-3:2021/FDAM 3:2021(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
©
NATIONAL REGULATIONS. IEEE 2019

---------------------- Page: 1 ----------------------
ISO/IEC/IEEE 8802-3:2021/FDAM 3:2021(E)

COPYRIGHT PROTECTED DOCUMENT
© IEEE 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from IEEE at the address below.
Institute of Electrical and Electronics Engineers, Inc
3 Park Avenue, New York
NY 10016-5997, USA
Email: stds.ipr@ieee.org
Website: www.ieee.org
Published in Switzerland
ii © IEEE 2019 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC/IEEE 8802-3:2021/FDAM 3:2021(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are
members of ISO or IEC participate in the development of International Standards through technical
committees established by the respective organization to deal with particular fields of technical activity.
ISO and IEC technical committees collaborate in fields of mutual interest. Other international
organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the
work.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO/IEC documents should be noted.
IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating
Committees of the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its
standards through a consensus development process, approved by the American National Standards
Institute, which brings together volunteers representing varied viewpoints and interests to achieve the
final product. Volunteers are not necessarily members of the Institute and serve without compensation.
While the IEEE administers the process and establishes rules to promote fairness in the consensus
development process, the IEEE does not independently evaluate, test, or verify the accuracy of any of the
information contained in its standards.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Details
of any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents) or the IEC list of patent
declarations received (see patents.iec.ch).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the World
Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT),
see www.iso.org/iso/foreword.html. In the IEC, see www.iec.ch/understanding-standards.
ISO/IEC/IEEE 8802-3:2021/Amd.3 was prepared by the LAN/MAN of the IEEE Computer Society (as
IEEE Std 802.3cd-2018) and drafted in accordance with its editorial rules. It was adopted, under the “fast-
track procedure” defined in the Partner Standards Development Organization cooperation agreement
between ISO and IEEE, by Joint Technical Committee ISO/IEC JTC 1, Information technology,
Subcommittee SC 6, Telecommunications and information exchange between systems.
A list of all parts in the ISO/IEC/IEEE 8802 series can be found on the ISO and IEC websites.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html and www.iec.ch/national-
committees.
© IEEE 2019 – All rights reserved iii

---------------------- Page: 3 ----------------------
IEEE Std 802.3cd™-2018
(Amendment to IEEE Std 802.3™-2018
as amended by IEEE Std 802.3cb™-2018
and IEEE Std 802.3bt™-2018)
IEEE Standard for Ethernet
Amendment 3:
Media Access Control Parameters 
for 50 Gb/s and Physical Layers and
Management Parameters for 50 Gb/s,
100 Gb/s, and 200 Gb/s Operation
Sponsor
LAN/MAN Standards Committee
of the
IEEE Computer Society
Approved 5 December 2018
IEEE-SA Standards Board

---------------------- Page: 4 ----------------------
ISO/IEC/IEEE 8802-3:2021/Amd.3:2021(E)
Abstract: Clause 131 through Clause 140 and Annex 135A through Annex 136D are added t o
IEEE Std 802.3-2018 by this amendment to specify IEEE 802.3 Media Access Control (MAC)
parameters, Physical Layer specifications, and management parameters for the transfer of IEEE
802.3 format frames at 50 Gb/s, 100 Gb/s, and 200 Gb/s.
Keywords: 50GAUI-1, 50GAUI-2, 50GBASE-CR, 50GBASE-FR, 50GBASE-KR, 50GBASE-LR,
50GBASE-SR, 50 Gigabit Ethernet, 50GMII, 100GAUI-2, 100GAUI-4, 100GBASE-CR2,
100GBASE-DR, 100GBASE-KR2, 100GBASE-SR2, 100 Gigabit Ethernet, 200GBASE-CR4,
200GBASE-KR4, 200GBASE-SR4, 200 Gigabit Ethernet, amendment, EEE, Energy-Efficien t
Ethernet, Ethernet, FEC, forward error correction, IEEE 802.3™, IEEE 802.3cd™, LAUI-2, MMF,
SMF
The Institute of Electrical and Electronics Engineers, Inc.
3 Park Avenue, New York, NY 10016-5997, USA
Copyright © 2019 by The Institute of Electrical and Electronics Engineers, Inc.
All rights reserved. Published 15 February 2019. Printed in the United States of America.
IEEE and 802 are registered trademarks in the U.S. Patent & Trademark Office, owned by The Institute of Electrical and
Electronics Engineers, Incorporated.
PDF: ISBN 978-1-5044-5357-8 STD23441
Print: ISBN 978-1-5044-5358-5 STDPD23441
IEEE prohibits discrimination, harassment and bullying.
For more information, visit http://www.ieee.org/web/aboutus/whatis/policies/p9-26.html.
No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission
of the publisher.

---------------------- Page: 5 ----------------------
ISO/IEC/IEEE 8802-3:2021/Amd.3:2021(E)
Important Notices and Disclaimers Concerning IEEE Standards
Documents
IEEE documents are made available for use subject to important notices and legal disclaimers. These notices and
disclaimers, or a reference to this page, appear in all standards and may be found under the heading “Important Notices
and Disclaimers Concerning IEEE Standards Documents.” They can also be obtained on request from IEEE or viewed at
http://standards.ieee.org/ipr/disclaimers.html.
Notice and Disclaimer of Liability Concerning the Use of IEEE Standards
Documents
IEEE Standards documents (standards, recommended practices, and guides), both full-use and trial-use, are developed
within IEEE Societies and the Standards Coordinating Committees of the IEEE Standards Association (“IEEE-SA”)
Standards Board. IEEE (“the Institute”) develops its standards through a consensus development process, approved by
the American National Standards Institute (“ANSI”), which brings together volunteers representing varied viewpoints
and interests to achieve the final product. IEEE Standards are documents developed through scientific, academic, and
industry-based technical working groups. Volunteers in IEEE working groups are not necessarily members of the
Institute and participate without compensation from IEEE. While IEEE administers the process and establishes rules to
promote fairness in the consensus development process, IEEE does not independently evaluate, test, or verify the
accuracy of any of the information or the soundness of any judgments contained in its standards.
IEEE Standards do not guarantee or ensure safety, security, health, or environmental protection, or ensure against
interference with or from other devices or networks. Implementers and users of IEEE Standards documents are
responsible for determining and complying with all appropriate safety, security, environmental, health, and interference
protection practices and all applicable laws and regulations.
IEEE does not warrant or represent the accuracy or content of the material contained in its standards, and expressly
disclaims all warranties (express, implied and statutory) not included in this or any other document relating to the
standard, including, but not limited to, the warranties of: merchantability; fitness for a particular purpose; non-
infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, IEEE disclaims
any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and
“WITH ALL FAULTS.”
Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other
ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE
standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change
brought about through developments in the state of the art and comments received from users of the standard.
In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for,
or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to
another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in
the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competen t
professional in determining the appropriateness of a given IEEE standard.
IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE.
Translations
The IEEE consensus development process involves the review of documents in English only. In the event that an IEEE
standard is translated, only the English version published by IEEE should be considered the approved IEEE standard.
3
Copyright © 2019 IEEE. All rights reserved.

---------------------- Page: 6 ----------------------
ISO/IEC/IEEE 8802-3:2021/Amd.3:2021(E)
Official statements
A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual
shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considere d
to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, a n
individual presenting information on IEEE standards shall make it clear that his or her views should be considered the
personal views of that individual rather than the formal position of IEEE.
Comments on standards
Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership
affiliation with IEEE. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards
documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with
appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important that
any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE
and the members of its societies and Standards Coordinating Committees are not able to provide an instant response to
comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEE E
does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is
welcome to join the relevant IEEE working group.
Comments on standards should be submitted to the following address:
Secretary, IEEE-SA Standards Board 
445 Hoes Lane 
Piscataway, NJ 08854 USA
Laws and regulations
Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions
of any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of
the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the
publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents
may not be construed as doing so.
Copyrights
IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws. They are made
available by IEEE and are adopted for a wide variety of both public and private uses. These include both use, by
reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering
practices and methods. By making these documents available for use and adoption by public authorities and private
users, IEEE does not waive any rights in copyright to the documents.
Photocopies
Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions
of any individual standard for company or organizational internal use or individual, non-commercial use only. T o
arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Service, 222 Rosewood
Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for
educational classroom use can also be obtained through the Copyright Clearance Center.
4
Copyright © 2019 IEEE. All rights reserved.

---------------------- Page: 7 ----------------------
ISO/IEC/IEEE 8802-3:2021/Amd.3:2021(E)
Updating of IEEE Standards documents
Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the
issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda, or
errata. An official IEEE document at any point in time consists of the current edition of the document together with any
amendments, corrigenda, or errata then in effect.
Every IEEE standard is subjected to review at least every ten years. When a document is more than ten years old and has
not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do no t
wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of
any IEEE standard.
In order to determine whether a given document is the current edition and whether it has been amended through the
issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at http://ieeexplore.ieee.org or contact IEEE a t
the address listed previously. For more information about the IEEE SA or IEEE’s standards development process, visit
the IEEE-SA Website at http://standards.ieee.org.
Errata
Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL :
http://standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodically.
Patents
Attention is called to the possibility that implementation of this standard may require use of subject matter covered by
patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity o f
any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an
Accepted Letter of Assurance, then the statement is listed on the IEEE-SA Website a t
http://standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate whether the Submitter is
willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, wit h
reasonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtai n
such licenses.
Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not responsible for
identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity
or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with
submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users
of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringemen t
of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Standards
Association.
5
Copyright © 2019 IEEE. All rights reserved.

---------------------- Page: 8 ----------------------
ISO/IEC/IEEE 8802-3:2021/Amd.3:2021(E)
Participants
The following individuals were officers and members of the IEEE 802.3 Working Group at the beginning of
the IEEE P802.3cd Working Group ballot.
David J. Law, IEEE 802.3 Working Group Chair
Adam Healey, IEEE 802.3 Working Group Vice-Chair
Pete Anslow, IEEE 802.3 Working Group Secretary
Steven B. Carlson, IEEE 802.3 Working Group Executive Secretary
Valerie Maguire, IEEE 802.3 Working Group Treasurer
Mark Nowell, IEEE P802.3cd Task Force Chair
Matt Brown, IEEE P802.3cd Task Force Editor-in-Chief
Arthur Marris, IEEE P802.3cd Task Force Editor
Gary Nicholl, IEEE P802.3cd Task Force Editor
Adee Ran, IEEE P802.3cd Task Force Editor
1
Jonathan King, IEEE P802.3cd Task Force Editor
Peter Stassar, IEEE P802.3cd Task Force Editor
Justin Abbott Eric DiBiaso Andrew Jimenez
David Abramson John Dillard
John Johnson
Dale Amason Chris Diminico
Chad Jones
Curtis Donahue
Eric Baden
Peter Jones
Amrik Bains Michael Dudek
Upen Kareti
Thananya Baldwin Frank Effenberger
Yasuaki Kawatsu
Denis Beaudoin John Ewen
Yongbum Kim
Christian Beia Ramin Farjad
Mark Kimber
Vipul Bhatt Shahar Feldman
Scott Kipp
Matthias Fritsche
William Bliss
Michael Klempa
Mark Bohm Richard Frosch
Curtis Knittle
Brad Booth Andrew Gardner
Shigeru Kobayashi
Martin Bouda Ali Ghiasi
Paul Kolesar
David Brandt Steven Gorshe
Toshihiko Kusano
Ralf-Peter Braun Steffen Graber
Hans Lackner
Theodore Brillhart Olaf Grau
Paul Brooks Robert M. Grow Jeffrey Lapak
Phillip Brownlee Yong Guo Mark Laubach
Chris Bullock Mark Gustlin Greg Le Cheminant
Jairo Bustos Heredia Marek Hajduczenia
Hanan Leizerovich
Adrian Butter Tomohiro Hashimoto
David Lewis
Anthony Calbone Akinori Hayakawa
Jon Lewis
Clark Carty Rajmohan Hegde
Mike Peng Li
Craig Chabot David Hess
Robert Lingle
Mandeep Chadha Yasuo Hidaka
Hai-Feng Liu
David Chalupsky David Hoglund
Zhenyu Liu
Jacky Chang Rita Horner
Moiz Lokhandwala
Xin Chang Bernd Horrmeyer
Miklos Lukacs
Chan Chen Xi Huang
Kent Lusted
Weiying Cheng Xingang Huang
Zahy Madgar
Golam Choudhury Yasuhiro Hyakutake
Jeffery Maki
Keng Hua Chuang Jonathan Ingham
David Malicoat
Christopher R. Cole Kazuhiko Ishibe
Takeo Masuda
John D’Ambrosia Hideki Isono
Piers J. G. Dawe Kirsten Matheus
Tom Issenhuth
Fred Dawson Kenneth Jackson Erdem Matoglu
1
Not a member of the IEEE 802.3 working group at the beginning of the working group ballot.
6
Copyright © 2019 IEEE. All rights reserved.

---------------------- Page: 9 ----------------------
ISO/IEC/IEEE 8802-3:2021/Amd.3:2021(E)
Mick McCarthy Alon Regev Yoshihiro Tsukamoto
Brett McClellan Duane Remein Ed Ulrichs
Thomas McDermott Salvatore Rotolo
Alexander Umnov
John McDonough Sam Sambasivan
Sterling A. Vaden
Larry McMillan Edward Sayre
Stefano Valle
Greg McSorley Fred Schindler
Paul Vanderlaan
Marcel Medina Masood Shariff
Dylan Walker
Richard Mei Kapil Shrikhande
Roy Wang
Richard Mellitz Jeff Slavick
Tongtong Wang
Phil Miguelez Daniel Smith
Xinyuan Wang
Paul Mooney Scott Sommers
Matthias Wendt
Ron Muir Dale Murray Yoshiaki Sone
Oded Wertheim
Henry Muyshondt Bryan Sparrowhawk
Natalie Wienckowski
Edward Nakamoto Atul Srivastava
Ludwig Winkel
Kevin Noll Heath Stewart
Peter Wu
David Ofelt David Stover
Dayin Xu
Thomas Palkert Ken-Ichi Suzuki
Yu Xu
Sujan Pandey Steve Swanson
Lennart Yseboodt
Andre Szczepanek
Sesha Panguluri
Hayato Yuki
Earl Parsons William Szeto
Andrew Zambell
Wanquan Peng Bharat Tailor
Huanlin Zhang
Ruben Perez De Aranda Alonso Takayuki Tajima
Qiwen Zhong
Michael Peters Tomoo Takahara
Yan Zhuang
Jean Picard Kohichi Tamura
George Zimmerman
David Piehler Nathan Tracy
Helge Zinner
Rick Pimpinella Matthew Traverso
David Tremblay Pavel Zivny
William Powell
Rick Rabinovich Stephen Trowbridge
The following members of the individual balloting committee voted on this amendment. Balloters may have
voted for approval, disapproval, or abstention.
Thomas Alexander Brian Franchuk Hyeong Ho Lee
Richard Alfvin Avraham Freedman Hanan Leizerovich
Arne Alping Yukihiro Fujimoto David Lewis
Pete Anslow Zhigang Gong Jon Lewis
Butch Anton Eric W. Gray Robert Lingle
Eric Baden Randall Groves Hai-Feng Liu
Mark Gustlin
John Ballingall Kent Lusted
Ralf-Peter Braun Adam Healey Michael Lynch
Nancy Bravin Marco Hernandez Elvis Maculuba
Theodore Brillhart David Hess Valerie Maguire
Matt Brown Yasuo Hidaka Jeffery Maki
Demetrio Bucaneg Werner Hoelzl Arthur Marris
Gary Burrell Rita Horner Michael Maytum
Jairo Bustos Heredia Noriyuki Ikeuchi Mick McCarthy
William Byrd Sergiu Iordanescu Brett McClellan
John Calvin Osamu Ishida Thomas McDermott
Steven B. Carlson Atsushi Ito Richard Mellitz
Juan Carreon Raj Jain Tremont Miao
Clark Carty SangKwon Jeong Charles Moorwood
Chan Chen Peter Jones Rick Murphy
Keith Chow Manabu Kagami Michael Newman
Keng Hua Chuang Piotr Karocki Charles Ngethe
Charles Cook Stuart Kerry Gary Nicholl
Piers J. G. Dawe Yongbum Kim Nick S. A. Nikjoo
Stephen Didde Jonathan King Mark Nowell
Michael Dudek Paul Kolesar Satoshi Obara
Sourav Dutta Mark Laubach Thomas Palkert
Jason Ellison David J. Law Bansi Patel
7
Copyright © 2019 IEEE. All rights reserved.

---------------------- Page: 10 ----------------------
ISO/IEC/IEEE 8802-3:2021/Amd.3:2021(E)
Arumugam Paventhan Peter Stassar Dmitri Varsanofiev
Michael Peters Robert Stone George Vlantis
David Piehler Walter Struppler Khurram Waheed
Rick Pimpinella Mitsutoshi Sugawara Lisa Ward
Adee Ran Junqing Sun Keith Waters
R. K. Rannow Patrik Sundstrom Oded Wertheim
Alon Regev Andre Szczepanek Andreas Wolf
Maximilian Riegel Kohichi Tamura Chun Yu Charles Wong
Robert Robinson David Thompson Peter Wu
Alexander Rysin Geoffrey Thompson Xin Wu
Toshiaki Sakai Michael Thompson Jun Xu
Kapil Shrikhande David Tremblay Adrian Young
Jason Shriver Stephen Trowbridge Oren Yuen
Jeff Slavick Mark-Rene Uchida Andrew Zambell
Daniel Smith Alexander Umnov Zhen Zhou
Thomas Starai Paul Vanderlaan Pavel Zivny
When the IEEE-SA Standards Board approved this amendment on 5 December 2018, it had the following
membership:
Jean-Philippe Faure, Chair
Gary Hoffman, Vice Chair
John D. Kulick, Past Chair
Konstantinos Karachalios, Secretary
Ted Burse
Xiaohui Liu Robby Robson
Guido R. Hiertz Dorothy Stanley
Kevin Lu
Christel Hunter Daleep Mohla Mehmet Ulema
Phil Wennblom
Joseph L. Koepfinger* Andrew Myles
Thomas Koshy Paul Nikolich Philip Winston
Howard Wolfman
Hung Ling Ronald C. Petersen
Annette D. Reilly Jingyi Zhou
Dong Liu
*Member Emeritus
8
Copyright © 2019 IEEE. All rights reserved.

---------------------- Page: 11 ----------------------
ISO/IEC/IEEE 8802-3:2021/Amd.3:2021(E)
Introduction
This introduction is not part of IEEE Std 802.3cd-2018, IEEE Standard for Ethernet. Amendment 3: Media Access
Control Parameters for 50 Gb/s and Physical Layers and Management Parameters for 50 Gb/s, 100 Gb/s, and
200 Gb/s Operation.
IEEE Std 802.3™ was first published in 1985. Since the initial publication, many projects have added
functionality or provided maintenance updates to the specifications and text included in the standard. Each
IEEE 802.3 project/amendment is identified with a suffix (e.g., IEEE Std 802.3ba™-2010).
The half duplex Media Access Control (MAC) protocol specified in IEEE Std 802.3-1985 is Carrier Sense
Multiple Access with Collision Detection (CSMA/CD). This MAC protocol was key to the experimental
Ethernet developed at Xerox Palo Alto Research Center, which had a 2.94 Mb/s data rate. Ethernet at
10 Mb/s was jointly released as a public specification by Digital Equipment Corporation (DEC), Intel and
Xerox in 1980. Ethernet at 10 Mb/s was approved as an IEEE standard by the IEEE Standards Board in 1983
and subsequently published in 1985 as IEEE Std 802.3-1985. Since 1985, new media options, new speeds o f
operation, and new capabilities have been added to IEEE Std 802.3. A full duplex MAC protocol was added
in 1997.
Some of the major additions to IEEE Std 802.3 are identified in the marketplace with their project number.
This is most common for projects adding higher speeds of operation or new protocols. For example, IEEE
Std 802.3u™ added 100 Mb/s operation (also called Fast Ethernet), IEEE Std 802.3z added 1000 Mb/s
operation (also called Gigabit Ethernet), IEEE Std 802.3ae added 10 Gb/s operation (also called 10 Gigabit
Ethernet), IEEE Std 802.3ah™ specified access network Ethernet (also called Ethernet in the First Mile) and
IEEE Std 802.3ba added 40 Gb/s operation (also called 40 Gigabit Ethernet) and 100 Gb/s operation (also
called 100 Gigabit Ethernet). These major additions are all now included in and are superseded by IEEE St d
802.3-2018 and are not maintained as separate documents.
At the date of publication for IEEE Std 802.3cd-2018, IEEE Std 802.3 was composed of the following
documents:
IEEE Std 802.3-2018
Section One—Includes Clause 1 through Clause 20 and Annex A through Annex H and Annex 4A.
Section One includes the specifications for 10 Mb/s operation and the MAC, frame formats and servic e
interfaces used for all speeds of operation.
Section Two—Includes Clause 21 through Clause 33 and Annex 22A through Annex 33E. Section
Two includes management attributes for multiple protocols and speed of operation as well as
specifications for providing power over twisted pair cabling for multiple operational speeds. It also
includes general information on 100 Mb/s operation as well as most of the 100 Mb/s Physical Layer
specifications.
Section Three—Includes Clause 34 through Clause 43 and Annex 36A through Annex 43C. Sectio n
Three includes general information on 1000 Mb/s operation as well as most of the 1000 Mb/s Physical
Layer specifications.
Section Four—Includes Clause 44 through Clause 55 and Annex 44A through Annex 55B. Sectio n
Four includes general information on 10 Gb/s operation as well as most of the 10 Gb/s Physical Layer
specifications.
Section Five—Includes Clause 56 through Clause 77 and Annex 57A through Annex 76A. Clause 56
through Clause 67 and Clause 75 through Clause 77, as well as associated annexes, specify subscriber
9
Copyright © 2019 IEEE. All rights reserved.

---------------------- Page: 12 ----------------------
ISO/IEC/IEEE 8802-3:2021/Amd.3:2021(E)
access and other Physical Layers and sublayers for operation from 512 kb/s to 10 Gb/s, and defines
services and protocol elements that enable the exchange of IEEE Std 802.3 format frames between
stations in a subscriber access network. Clause 68 specifies a 10 Gb/s Physical Layer specification.
Clause 69 through Clause 74 and associated annexes specify Ethernet operation over electrical
backplanes at speeds of 1000 Mb/s and 10 Gb/s.
Section Six—Includes Clause 78 through Clause 95 and Annex 83A through Annex 93C. Clause 78
specifies Energy-Efficient Ethernet. Clause 79 specifies IEEE 802.3 Organizationally Specific Link
Layer Discovery Protocol (LLDP) type, length, and value (TLV) information elements. Clause 80
through Clause 95 and associated annexes include general information on 40 Gb/s and 100 Gb/s
operation as well as 40 Gb/s and 100 Gb/s Physical Layer specifications. Clause 90 specifies Ethernet
support for
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.