ISO 22090-3:2014

Ships and marine technology — Transmitting heading devices (THDs) — Part 3: GNSS principles

ISO 22090-3:2014 specifies general requirements, construction, performance, and testing of transmitting heading device using GNSS principle as required by chapter V, SOLAS 1974 (as amended).

Navires et technologie maritime — Dispositifs de transmission de données de pilotage — Partie 3: Principes pour un système global de navigation par satellites

General Information

• Status: Published
• Publication Date: 23-Feb-2014
• ICS: 47.020.70 - Navigation and control equipment
• Technical Committee: ISO/TC 8/SC 6 - Navigation and ship operations
• Drafting Committee: ISO/TC 8/SC 6 - Navigation and ship operations
• Current Stage: 9092 - International Standard to be revised
• Completion Date: 09-Nov-2023

Relations

• Revises: ISO 22090-3:2004 - Ships and marine technology — Transmitting heading devices (THDs) — Part 3: GNSS principles
• Effective Date: 02-Jun-2012

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 22090-3
Second edition
2014-03-01
Ships and marine technology —
Transmitting heading devices
(THDs) —
Part 3:
GNSS principles
Navires et technologie maritime — Dispositifs de transmission de
données de pilotage —
Partie 3: Principes pour un système global de navigation par satellites
Reference number
ISO 22090-3:2014(E)
©
ISO 2014

---------------------- Page: 1 ----------------------
ISO 22090-3:2014(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2014
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2014 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 22090-3:2014(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Performance and requirements . 3
4.1 Functionality . 3
4.2 Continuous operation . 4
4.3 Presentation of information . 4
4.4 Heading output alignment . 4
4.5 Compensation for brief GNSS signal interruption . 4
4.6 Settling time . 4
4.7 Heading information . 4
4.8 Alert signal . 4
4.9 Interface . 4
5 Accuracy . 5
5.1 General . 5
5.2 Accuracy of transmission data . 5
5.3 Static error (settle point error) . 5
5.4 Dynamic error .
...