ISO/TR 23107:2019

Criteria for assessment of new extinguishants for inclusion in the ISO 14520 series

This document addresses the subject of criteria for assessment of new extinguishants for inclusion in the ISO 14520 series.

Critères pour l'évaluation de nouveaux agents extincteurs destinés à être inclus dans la série ISO 14520

General Information

• Status: Withdrawn
• Publication Date: 16-Apr-2019
• Withdrawal Date: 16-Apr-2019
• ICS: 13.220.10 - Fire-fighting
• Technical Committee: ISO/TC 21/SC 8 - Gaseous media and firefighting systems using gas
• Drafting Committee: ISO/TC 21/SC 8/WG 6 - Physical properties and system design (extinguishants CF3I, FK-5-1-12, HCFC Blend A, HFC 125, HFC 227ea, HFC 23, HFC 236fa)
• Current Stage: 9599 - Withdrawal of International Standard
• Completion Date: 08-Jul-2021

Relations

• Revised: ISO/TR 23107:2021 - Criteria for assessment of new extinguishants for inclusion in the ISO 14520 series
• Effective Date: 23-Apr-2020
• Consolidated By: ISO 6346:2022 - Freight containers — Coding, identification and marking
• Effective Date: 06-Jun-2022

Standards Content (Sample)

TECHNICAL ISO/TR
REPORT 23107
First edition
2019-04
Criteria for assessment of new
extinguishants for inclusion in the ISO
14520 series
Critères pour l'évaluation de nouveaux agents extincteurs destinés à
être inclus dans la série ISO 14520
Reference number
ISO/TR 23107:2019(E)
©
ISO 2019

---------------------- Page: 1 ----------------------
ISO/TR 23107:2019(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/TR 23107:2019(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Check list . 1
© ISO 2019 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO/TR 23107:2019(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www .iso
.org/iso/foreword .html.
This document was prepared by Technical Committee ISO/TC 21, Equipment for fire protection and fire
fighting, Subcommittee SC 8, Gaseous media and firefighting systems using gas.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/members .html.
iv © ISO 2019 – All rights reserved

---------------------- Page: 4 ----------------------
ISO/TR 23107:2019(E)

Introduction
This document includes technical information related to the design and use of total flooding fire
extinguishing systems using liquefied or non-liquefied gaseous fire extinguishing agents. Suggested
minimum extinguishant information in
...