Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 1Q: Bridges and bridged networks

ISO/IEC/IEEE 8802-1Q:2016 Bridges that interconnect individual LANs, each supporting the IEEE 802 MAC Service using a different or identical media access control method, to provide Bridged Networks and VLANs.

Technologies de l'information — Télécommunications et échange d'information entre systèmes — Réseaux locaux et métropolitains — Exigences spécifiques — Partie 1Q: Ponts et réseaux pontés

General Information

Status
Withdrawn
Publication Date
10-Mar-2016
Withdrawal Date
10-Mar-2016
Current Stage
9599 - Withdrawal of International Standard
Completion Date
21-Aug-2020
Ref Project

Relations

Buy Standard

Standard
ISO/IEC/IEEE 8802-1Q:2016 - Information technology -- Telecommunications and information exchange between systems -- Local and metropolitan area networks -- Specific requirements
English language
1800 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO/IEC/
STANDARD IEEE
8802-1Q
First edition
2016-03-15
Information technology —
Telecommunications and information
exchange between systems — Local and
metropolitan area networks — Specific
requirements —
Part 1Q:
Bridges and bridged networks
Technologies de l'information — Télécommunications et échange
d'information entre systèmes — Réseaux locaux et métropolitains —
Exigences spécifiques
Partie 1Q: Ponts et réseaux pontés
Reference number
ISO/IEC/IEEE 8802-1Q:2016(E)
©
IEEE 2014

---------------------- Page: 1 ----------------------
ISO/IEC/IEEE 8802-1Q:2016(E)
COPYRIGHT PROTECTED DOCUMENT
©  IEEE 2014
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from ISO, IEC or IEEE at the respective
address below.
ISO copyright office IEC Central Office Institute of Electrical and
Case postale 56 3, rue de Varembé Electronics Engineers, Inc.
CH-1211 Geneva 20 CH-1211 Geneva 20 3 Park Avenue, New York
Tel. + 41 22 749 01 11 Switzerland NY 10016-5997, USA
Fax + 41 22 749 09 47 E-mail inmail@iec.ch E-mail stds.ipr@ieee.org
E-mail copyright@iso.org Web www.iec.ch Web www.ieee.org
Web www.iso.org
Published in Switzerland.
ii © IEEE 2014 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC/IEEE 8802-1Q:2016(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are members of
ISO or IEC participate in the development of International Standards through technical committees established
by the respective organization to deal with particular fields of technical activity. ISO and IEC technical
committees collaborate in fields of mutual interest. Other international organizations, governmental and non-
governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO
and IEC have established a joint technical committee, ISO/IEC JTC 1.
IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating
Committees of the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its standards
through a consensus development process, approved by the American National Standards Institute, which
brings together volunteers representing varied viewpoints and interests to achieve the final product. Volunteers
are not necessarily members of the Institute and serve without compensation. While the IEEE administers the
process and establishes rules to promote fairness in the consensus development process, the IEEE does not
independently evaluate, test, or verify the accuracy of any of the information contained in its standards.
The main task of ISO/IEC JTC 1 is to prepare International Standards. Draft International Standards adopted
by the joint technical committee are circulated to national bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the national bodies casting a vote.
Attention is called to the possibility that implementation of this standard may require the use of subject matter
covered by patent rights. By publication of this standard, no position is taken with respect to the existence or
validity of any patent rights in connection therewith. ISO/IEEE is not responsible for identifying essential
patents or patent claims for which a license may be required, for conducting inquiries into the legal validity or
scope of patents or patent claims or determining whether any licensing terms or conditions provided in
connection with submission of a Letter of Assurance or a Patent Statement and Licensing Declaration Form, if
any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly
advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is
entirely their own responsibility. Further information may be obtained from ISO or the IEEE Standards
Association.
ISO/IEC/IEEE 8802-1Q was prepared by the LAN/MAN of the IEEE Computer Society (as
IEEE 802.1Q-2014). It was adopted by Joint Technical Committee ISO/IEC JTC 1, Information technology,
Subcommittee SC 6, Telecommunications and information exchange between systems, in parallel with its
approval by the ISO/IEC national bodies, under the “fast-track procedure” defined in the Partner Standards
Development Organization cooperation agreement between ISO and IEEE. IEEE is responsible for the
maintenance of this document with participation and input from ISO/IEC national bodies.
ISO/IEC/IEEE 8802 consists of the following parts, under the general title Information technology —
Telecommunications and information exchange between systems — Local and metropolitan area networks —
Specific requirements
— Part 1: Overview of Local Area Network Standards
— Part 2: Logical link control
— Part 5: Token ring access method and physical layer specifications
— Part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) specifications
— Part 1X: Port-based network access control
— Part 1AB: Station and media access control connectivity discovery
© IEEE 2014 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO/IEC/IEEE 8802-1Q:2016(E)
— Part 1AE: Media access control (MAC) security
— Part 1AR: Secure device identity
— Part 1AS: Timing and synchronization for time-sensitive applications in bridged local area networks
— Part 15-4: Wireless medium access control (MAC) and physical layer (PHY) specifications for low-rate
wireless personal area networks (WPANs)
iv © IEEE 2014 – All rights reserved

---------------------- Page: 4 ----------------------
IEEE Standard for
    Local and metropolitan area networks—
Bridges and Bridged Networks
IEEE Computer Society
Sponsored by the
LAN/MAN Standards Committee
IEEE
IEEE Std 802.1Q™-2014
3 Park Avenue
(Revision of
New York, NY 10016-5997
IEEE Std 802.1Q-2011)
USA

---------------------- Page: 5 ----------------------
ISO/IEC/IEEE 8802 1Q:2016(E)
IEEE Std 802.1Q™-2014
(Revision of
IEEE Std 802.1Q-2011)
IEEE Standard for
Local and metropolitan area networks—
Bridges and Bridged Networks
Sponsor
LAN/MAN Standards Committee
of the
IEEE Computer Society
Approved 3 November 2014
IEEE-SA Standards Board

---------------------- Page: 6 ----------------------
ISO/IEC/IEEE 8802 1Q:2016(E)
Abstract: This standard specifies how the Media Access Control (MAC) Service is supported by
Bridged Networks, the principles of operation of those networks, and the operation of MAC Bridges
and VLAN Bridges, including management, protocols, and algorithms
Keywords: Bridged Network, IEEE 802.1Q™, LAN, local area network, MAC Bridge, metropolitan
area networks, MSTP, Multiple Spanning Tree Protocol, Rapid Spanning Tree Protocol, RSTP,
PBN, Provider Bridged Network, Shortest Path Bridging Protocol, SPB Protocol, Virtual Bridged
Network, virtual LAN, VLAN Bridge
The Institute of Electrical and Electronics Engineers, Inc.
3 Park Avenue, New York, NY 10016-5997, USA
Copyright © 2014 by The Institute of Electrical and Electronics Engineers, Inc.
All rights reserved. Published 19 December 2014. Printed in the United States of America.
IEEE and 802 are registered trademarks in the U.S. Patent & Trademark Office, owned by The Institute of Electrical and Electronics
Engineers, Incorporated.
PDF: ISBN 978-0-7381-9433-2 STD20044
Print: ISBN 978-0-7381-9434-9 STDPD20044
IEEE prohibits discrimination, harassment and bullying. For more information, visit http://www.ieee.org/web/aboutus/whatis/policies/p9-26.html.
No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission
of the publisher.

---------------------- Page: 7 ----------------------
ISO/IEC/IEEE 8802 1Q:2016(E)
Important Notices and Disclaimers Concerning IEEE Standards Documents
IEEE documents are made available for use subject to important notices and legal disclaimers. These notices
and disclaimers, or a reference to this page, appear in all standards and may be found under the heading
“Important Notice” or “Important Notices and Disclaimers Concerning IEEE Standards Documents.”
Notice and Disclaimer of Liability Concerning the Use of IEEE Standards
Documents
IEEE Standards documents (standards, recommended practices, and guides), both full-use and trial-use, are
developed within IEEE Societies and the Standards Coordinating Committees of the IEEE Standards
Association (“IEEE-SA”) Standards Board. IEEE (“the Institute”) develops its standards through a
consensus development process, approved by the American National Standards Institute (“ANSI”), which
brings together volunteers representing varied viewpoints and interests to achieve the final product.
Volunteers are not necessarily members of the Institute and participate without compensation from IEEE.
While IEEE administers the process and establishes rules to promote fairness in the consensus development
process, IEEE does not independently evaluate, test, or verify the accuracy of any of the information or the
soundness of any judgments contained in its standards.
IEEE does not warrant or represent the accuracy or content of the material contained in its standards, and
expressly disclaims all warranties (express, implied and statutory) not included in this or any other
document relating to the standard, including, but not limited to, the warranties of: merchantability; fitness
for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of
material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort.
IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.”
Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there
are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to
the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and
issued is subject to change brought about through developments in the state of the art and comments
received from users of the standard.
In publishing and making its standards available, IEEE is not suggesting or rendering professional or other
services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any
other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his
or her own independent judgment in the exercise of reasonable care in any given circumstances or, as
appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE
standard.
IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO:
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON
ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND
REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE.
Translations
The IEEE consensus development process involves the review of documents in English only. In the event
that an IEEE standard is translated, only the English version published by IEEE should be considered the
approved IEEE standard.

---------------------- Page: 8 ----------------------
ISO/IEC/IEEE 8802 1Q:2016(E)
Official statements
A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board
Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its
committees and shall not be considered to be, or be relied on as, a formal position of IEEE. At lectures,
symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall
make it clear that his or her views should be considered the personal views of that individual rather than the
formal position of IEEE.
Comments on standards
Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of
membership affiliation with IEEE. However, IEEE does not provide consulting information or advice
pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a
proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a
consensus of concerned interests, it is important that any responses to comments and questions also receive
the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and
Standards Coordinating Committees are not able to provide an instant response to comments or questions
except in those cases where the matter has previously been addressed. For the same reason, IEEE does not
respond to interpretation requests. Any person who would like to participate in revisions to an IEEE
standard is welcome to join the relevant IEEE working group.
Comments on standards should be submitted to the following address:
Secretary, IEEE-SA Standards Board
445 Hoes Lane
Piscataway, NJ 08854 USA
Laws and regulations
Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the
provisions of any IEEE Standards document does not imply compliance to any applicable regulatory
requirements. Implementers of the standard are responsible for observing or referring to the applicable
regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not
in compliance with applicable laws, and these documents may not be construed as doing so.
Copyrights
IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws.
They are made available by IEEE and are adopted for a wide variety of both public and private uses. These
include both use, by reference, in laws and regulations, and use in private self-regulation, standardization,
and the promotion of engineering practices and methods. By making these documents available for use and
adoption by public authorities and private users, IEEE does not waive any rights in copyright to the
documents.
Photocopies
Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to
photocopy portions of any individual standard for company or organizational internal use or individual, non-
commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center,
Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to
photocopy portions of any individual standard for educational classroom use can also be obtained through
the Copyright Clearance Center.

---------------------- Page: 9 ----------------------
ISO/IEC/IEEE 8802 1Q:2016(E)
Updating of IEEE Standards documents
Users of IEEE Standards documents should be aware that these documents may be superseded at any time
by the issuance of new editions or may be amended from time to time through the issuance of amendments,
corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the
document together with any amendments, corrigenda, or errata then in effect.
Every IEEE standard is subjected to review at least every ten years. When a document is more than ten years
old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of
some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that
they have the latest edition of any IEEE standard.
In order to determine whether a given document is the current edition and whether it has been amended
through the issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at http://
ieeexplore.ieee.org/xpl/standards.jsp or contact IEEE at the address listed previously. For more information
about the IEEE-SA or IEEE’s standards development process, visit the IEEE-SA Website at http://
standards.ieee.org.
Errata
Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http://
standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata
periodically.
Patents
Attention is called to the possibility that implementation of this standard may require use of subject matter
covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the
existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has
filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-
SA Website at http://standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate
whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or
under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair
discrimination to applicants desiring to obtain such licenses.
Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not
responsible for identifying Essential Patent Claims for which a license may be required, for conducting
inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or
conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing
agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that
determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their
own responsibility. Further information may be obtained from the IEEE Standards Association.

---------------------- Page: 10 ----------------------
ISO/IEC/IEEE 8802 1Q:2016(E)
Participants
At the time this standard was submitted to the IEEE-SA Standards Board for approval, the IEEE 802.1
Working Group had the following membership:
Glenn Parsons, Chair
John Messenger, Vice Chair
Tony Jeffree, Editor
Stephen Haddock, Chair, Interworking Task Group
Ting Ao Hitoshi Hayakawa Dan Romascanu
Christian Boiger Jeremy Hitt Jessy V. Rouyer
Paul Bottorff Rahil Hussain Panagiotis Saltsidis
David Chen Michael Johas Teener Behcet Sarikaya
Feng Chen Peter Jones Michael Seaman
Weiying Cheng Hal Keen Daniel Sexton
Diego Crupnicoff Marcel Kiessling Johannes Specht
Rodney Cummings Yongbum Kim Kevin B. Stanton
Patrick Diamond Philippe Klein Wilfried Steiner
Aboubacar Kader Diarra Jouni Korhonen Vahid Tabatabaee
Janos Farkas Jeff Lynch Patricia Thaler
Norman Finn Ben Mack-Crane Jeremy Touve
Geoffrey Garner Christophe Mangin Karl Weber
Anoop Ghanwani James McIntosh Yuehua Wei
Mark Gravel Eric Multanen Brian Weis
Eric W. Gray Donald Pannell Jordon Woods
Craig Gunther Karen Randall Juan-Carlos Zuniga
Maximilian Riegel
The following members of the individual balloting committee voted on this standard. Balloters may have
voted for approval, disapproval, or abstention.
Thomas Alexander Tony Jeffree Benjamin Rolfe
Butch Anton Michael Johas Teener Dan Romascanu
Hugh Barrass Peter Jones Jessy Rouyer
Christian Boiger Shinkyo Kaku John Santhoff
William Byrd Piotr Karocki Peter Saunderson
Juan Carreon Stuart Kerry Bartien Sayogo
Keith Chow Jeff Koftinoff Michael Seaman
Charles Cook Bruce Kraemer Shusaku Shimada
Rodney Cummings Hyeong Ho Lee Kapil Sood
Darold Davis John Lemon Kevin Stanton
Sourav Dutta Elvis Maculuba Thomas Starai
Donald Eastlake Roger Marks Rene Struik
Richard Edgar Jeffery Masters Walter Struppler
Donald Fedyk Jonathon Mclendon Joseph Tardo
Yukihiro Fujimoto John Messenger William Taylor
Randall Groves Jose Morales Patricia Thaler
Robert Grow Michael Newman Dmitri Varsanofiev
Craig Gunther Nick S. A. Nikjoo Prabodh Varshney
Chris Guy Satoshi Obara Hung-Yu Wei
Marek Hajduczenia David Olsen Andreas Wolf
Werner Hoelzl Glenn Parsons Michael Wright
Rahil Hussain Jean Pierre Picard Oren Yuen
Noriyuki Ikeuchi Maximilian Riegel Daidi Zhong
Atsushi Ito Robert Robinson Zhen Zhou
vi Copyright © 2014 IEEE. All rights reserved.

---------------------- Page: 11 ----------------------
ISO/IEC/IEEE 8802 1Q:2016(E)
When the IEEE-SA Standards Board approved this standard on 3 November 2014, it had the following
membership:
John Kulick, Chair
Jon Walter Rosdahl, Vice-chair
Richard H. Hulett, Past Chair
Konstantinos Karachalios, Secretary
Peter Balma Michael Janezic Ron Peterson
Farooq Bari Jeffrey Katz Adrian Stephens
Peter Sutherland
Ted Burse Joseph L. Koepfinger*
David Law Yatin Trivedi
Clint Chaplain
Hung Ling Phil Winston
Stephen Dukes
Don Wright
Oleg Logvinov
Jean-Phillippe Faure
Yu Yuan
T. W. Olsen
Gary Hoffman
Glenn Parsons
*Member Emeritus
Also included are the following nonvoting IEEE-SA Standards Board liaisons:
Richard DeBlasio, DOE Representative
Michael Janezic, NIST Representative
Michelle Turner
IEEE-SA Content Publishing
Kathryn M. Bennett
IEEE-SA Standards Technical Community
Copyright © 2014 IEEE. All rights reserved. vii

---------------------- Page: 12 ----------------------
ISO/IEC/IEEE 8802 1Q:2016(E)
Historical participants
Since the initial publication, many IEEE standards have added functionality or provided updates to material
included in this standard. The following is a historical list of participants who have dedicated their valuable
time, energy, and knowledge to the creation of this material:
Officers at the time of
IEEE 802.1Q Standard Date approved by IEEE
Working Group Letter Ballot
William P. Lidinsky, Chair
8 December 1998
IEEE Std 802.1Q-1998
Mick Seaman, Chair, Interworking Task
Group
Tony Jeffree, Coordinating Editor
Anil Rijsinghani, Richard Hausmann,
Michele Wright, Paul Langille,
P. J. Singh, Editorial Team
Tony Jeffree, Chair
17 March 2001
IEEE Std 802.1u-2001
Neil Jarvis, Vice Chair
Mick Seaman, Chair, Interworking Task
Group
Tony Jeffree, Chair
17 March 2001
IEEE Std 802.1v-2001
Neil Jarvis, Vice Chair
Mick Seaman, Chair, Interworking Task
Group
David Delany, Editor
Andrew Smith, Editor
Tony Jeffree, Chair
11 December 2002
IEEE Std 802.1s-2002
Neil Jarvis, Vice Chair
Mick Seaman, Chair, Interworking Task
Group
Norman W. Finn, Editor
Tony Jeffree, Chair
28 March 2005
IEEE Std 802.1ad-2005
Paul Congdon, Vice Chair
Mick Seaman, Chair, Interworking Task
Group
Stephen R. Haddock, Editor
Tony Jeffree, Chair and Editor
7 December 2005
IEEE Std 802.1Q-2005
Paul Congdon, Vice Chair
Mick Seaman, Chair, Interworking Task
Group
Tony Jeffree, Chair and Editor
22 March 2007
IEEE Std 802.1ak-2007
Paul Congdon, Vice Chair
Mick Seaman, Chair, Interworking Task
Group
Tony Jeffree, Chair
27 September 2007
IEEE Std 802.1ag-2007
Paul Congdon, Vice Chair
Stephen R. Haddock, Chair,
Interworking Task Group
Norman W. Finn, Editor-in-Chief
David V. Elie-Dit-Cosaque, Dinesh
Mohan, Oscar Rodriguez, and Ali
Sajassi, Assistant Editors
viii Copyright © 2014 IEEE. All rights reserved.

---------------------- Page: 13 ----------------------
ISO/IEC/IEEE 8802 1Q:2016(E)
IEEE 802.1Q Standard Officers at the time of
Date approved by IEEE
Working Group Letter Ballot
Tony Jeffree, Chair
12 June 2008
IEEE Std 802.1ah-2008
Paul Congdon, Vice Chair
Stephen R. Haddock, Chair,
Interworking Task Group
Paul Bottorff, Stephen Haddock, and
Muneyoshi Suzuki, Editors
Tony Jeffree, Chair and Editor
26 September 2008
IEEE Std 802.1Q-2005/
Paul Congdon, Vice Chair
Cor-1-2008
Stephen R. Haddock, Chair,
Interworking Task Group
Tony Jeffree, Chair
10 December 2008
IEEE Std 802.1ap-2008
Paul Congdon, Vice Chair
Stephen R. Haddock, Chair,
Interworking Task Group
Glenn Parsons, Editor
David Levi, Assistant Editor
Tony Jeffree, Chair
17 June2009
IEEE Std 802.1Qaw-2009
Paul Congdon, Vice Chair
Stephen R. Haddock, Chair,
Interworking Task Group
Linda Dunbar, Editor
Tony Jeffree, Chair
17 June2009
IEEE Std 802.1Qay-2009
Paul Congdon, Vice Chair
Stephen R. Haddock, Chair,
Interworking Task Group
Panagiotis Saltsidis, Editor
Tony Jeffree, Chair
9 December 2009
IEEE Std 802.1aj-2009
Paul Congdon, Vice Chair
Stephen R. Haddock, Chair,
Interworking Task Group
John Messenger, Editor
Brian Hassink, MIB Editor
Tony Jeffree, Chair and Editor
9 November 2009
IEEE Std 802.1Qav-2009
Paul Congdon, Vice Chair
Michael Johas Teener, Chair, Audio
Video Bridging Task Group
Tony Jeffree, Chair
25 March 2010
IEEE Std 802.1Qau-2010
Paul Congdon, Vice Chair
Patricia Thaler, Chair, Data Center
BridgingTask Group
Norman W. Finn, Editor
Tony Jeffree, Chair
30 September 2010
IEEE Std 802.1Qat-2010
Paul Congdon, Vice Chair
Michael Johas Teener, Chair, Audio
Video Bridging Task Group
Craig Gunther, Editor
Copyright © 2014 IEEE. All rights reserved. ix

---------------------- Page: 14 ----------------------
ISO/IEC/IEEE 8802 1Q:2016(E)
IEEE 802.1Q Standard Officers at the time of
Date approved by IEEE
Working Group Letter Ballot
Tony Jeffree, Chair
16 June 2011
IEEE Std 802.1Qbe-2011
Paul Congdon, Vice Chair
Stephen Haddock, Chair, Interworking
Task Group
Norman Finn, Editor
Tony Jeffree, Chair
16 June 2011
IEEE Std 802.1Qbc-2011
Paul Congdon, Vice Chair
Stephen Haddock, Chair, Interworking
Task Group
Thomas Mack-Crane, Editor
Tony Jeffree, Chair
16 June 2011
IEEE Std 802.1Qbb-2011
Paul Congdon, Vice Chair
Patricia Thaler, Chair, Data Center
Bridging Task Group
Claudio DeSanti, Editor
Tony Jeffree, Chair
16 June 2011
IEEE Std 802.1Qaz-2011
Paul Congdon, Vice Chair
Patricia Thaler, Chair, Data Center
Bridging Task Group
Craig W. Carlson, Editor
Tony Jeffree, Chair
7 December 2011
IEEE Std 802.1Qbf-2011
Paul Congdon, Vice Chair
Stephen Haddock, Chair, Interworking
Task Group
Robert Sultan, Editor
Tony Jeffree, Chair
29 March 2012
IEEE Std 802.1aq-2012
Glenn Parsons, Vice Chair
Stephen Haddock, Chair, Interworking
Task Group
Donald Fedyk and Michael Seaman,
Editors
Tony Jeffree, Chair and Editor
14 May 2012
IEEE Std 802.1Qbg-2012
Paul Congdon, Vice Chair
Patricia Thaler, Chair, Data Center
Bridging Task Group
Paul Bottorff, Editor, Clauses 12 and 17
Tony Jeffree, Chair and Editor
19 October 2012
IEEE Std 802.1Q-2011/
Glenn Parsons, Vice Chair and Chair,
Cor-2-2012
Maintenance Task Group
Tony Jeffree, Chair
27 March 2014
IEEE Std 802.1Qbp-2014
Glenn Parsons, Vice Chair
Stephen Haddock, Chair, Interworking
Task Group
Ben Mack-Crane, Editor
x Copyright © 2014 IEEE. All rights reserved.

---------------------- Page: 15 ----------------------
ISO/IEC/IEEE 8802 1Q:2016(E)
IEEE 802.1Q Standard Officers at the time of
Date approved by IEEE
Working Group Letter Ballot
Tony Jeffree, Chair and Editor
9 February 2004
IEEE Std 802.1D-2004
Paul Congdon, Vice Chair
Mick Seaman, Chair, Interworking Task
Group and Editor
Copyright © 2014 IEEE. All rights reserved. xi

---------------------- Page: 16 ----------------------
ISO/IEC/IEEE 8802 1Q:2016(E)
Jade Chien
Osama Aboul-Magd Richard Graham
Hon Wah Chin
Steve Adams Mark Gravel
Jin-Seek Choi
Stephen Ades Michael A. Gravel
Chi Chong
Fumio Akashi Eric Gray
Chris Christ
Zehavit Alon Karanvir Grewal
Marc Cochran
Ken Alonge John Grinham
Paul Congdon
Ann Ambler Yingjie Gu
Glenn Connery
Paul D. Amer Craig Gunther
Alex Conta
Yafan An Mitch Gusat
Jim Corrigan
Ting Ao Stephen Haddock
Diego Crupnicoff
Charles Arnold Sharam Hakimi
David Cullerot
Peter Ashwood-Smith Mogens Hansen
Rodney Cummings
Siamack Ayandeh Harold Harrington
Uri Cummings
Floyd Backes John Hart
Ted Davies
Ann Ballard Scott Harvell
Andy Davis
Richard Bantel Mike Harvey
Peter Dawe
John Bartlett Takashi Hasegawa
Stan Degen
Sy Bederman Brian Hassink
Arjan de Heer
Alexei Beliaev Wayne Hathaway
Frank Deignan
Les Bell Brian Hausauer
David Delaney
Amatzia Ben-Artzi Richard Hausman
Prakash Desai
Avner Ben-Dor Hitoshi Hayakawa
Claudio DeSanti
Michael Berger Vic Hayes
Ron Dhondy
Caitlin Bestler Asif Hazarika
Jeffrey Dietz
Jan Bialkowski David Head
Russell Dietz
James S. Binder Gaby Hecht
Zhemin Ding
Robert Bledsoe Deepak Hegde
Kurt Dobbins
Rob Boatright Ariel Hendel
Eiji Doi
Kwami Boakaye Bob Herbst
Barbara J. Don Carlos
Christian Boiger John Hickey
Linda Dunbar
Brad Booth David Hollender
Craig Easley
Jean-Michel Bonnamy Steve Horowitz
Donald Eastlake, III
Mike Borza Bob Hott
Peter Ecclesine
Paul Bottorff Michelle Hsiung
J. J. Ekstrom
David Brady Charles Hudson
Anush Elangovan
Rudolf Brandner Jack R. Hung
Hesham M. Elbakoury
Martin Brewer Rita Hunt
Walter Eldon
Frank Bruns David Husak
David Elie-Dit-Cosaque
Juan Bulnes Altaf Hussain
Janos Farkas
Bill Bunch Thomas Hytry
Donald W. Fedyk
Jim Burns Romain Insler
Eldon D. Feist
Peter Carbone Ran Ish-Shalom
Felix Feifei Feng
Bob Cardinal Jay Israel
Norman Finn
Craig W. Carlson Atsushi Iwata
Len Fishler
Paul Carroll Vipin K. Jain
Kevin Flanagan
Marco Carugi Neil Jarvis
Yishai Fraenkel
Jeffrey Catlin Tony Jeffree
Paul Frantz
Dennis Cave Paul Hongkyu Jeong
David Frattura
Dirceu Cavendish Pankaj Jha
Robert Frazier
Alan Chambers Markus Jochim
Lars Henrik Frederiksen
Steve Chan Michael Johas Teener
Andre Fredette
David W. Chang Girault Jones
John Fuller
Xin Chang Shyam Kaluve
Ilango Ganga
Frank Chao Daya Kamath
Geoffrey Garner
Ken Chapman Abhay Karandikar
Anoop Ghanwani
Alice Chen Allen Kasey
Franz Goetz
Weiying Cheng Prakash Kashyap
Pat Gonia
Rao Cherukuri T
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.