ISO/DIS 3163
(Main)Adventure tourism -- Terminology
Adventure tourism -- Terminology
Titre manque
General Information
Standards Content (sample)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 3163
ISO/TC 228 Secretariat: UNE
Voting begins on: Voting terminates on:
2021-04-12 2021-07-05
Adventure tourism — Terminology
ICS: 03.080.30; 03.200.10; 01.040.03
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
This document is circulated as received from the committee secretariat.
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 3163:2021(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. ISO 2021
---------------------- Page: 1 ----------------------
ISO/DIS 3163:2021(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/DIS 3163:2021(E)
Contents Page
Foreword ........................................................................................................................................................................................................................................iv
Introduction ..................................................................................................................................................................................................................................v
1 Scope ................................................................................................................................................................................................................................. 1
2 Terms and definitions ..................................................................................................................................................................................... 1
Bibliography ................................................................................................................................................................................................................................ 6
© ISO 2021 – All rights reserved iii---------------------- Page: 3 ----------------------
ISO/DIS 3163:2021(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.This document was prepared by Technical Committee ISO/TC 228, Tourism and related services.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.iv © ISO 2021 – All rights reserved
---------------------- Page: 4 ----------------------
ISO/DIS 3163:2021(E)
Introduction
Adventure tourism
Adventure tourism is a global industry that is growing in importance. Whether provided on a
commercial, not for profit or charitable basis, adventure tourism activities involve an accepted,
inherent element of risk and challenge. Taking risks brings rewards but also brings dangers. In order
to maximize the rewards, adventure tourism activity providers should operate as safely as practicable.
ISO 20611, ISO 21101, ISO 21102 and ISO 21103 provide a basis for adventure tourism activity providers
to plan, deliver and inform about adventure tourism activities as safely as practicable.
Effective implementation of these documents will help consumers and other participants make
informed choices about activities and providers.Adventure tourism standards
The purpose of these documents is to set out the minimum requirements for safety management
systems and information to participants.The following four documents are independent entities since they apply to different aspects of
adventure tourism:— ISO 20611: provides requirements and recommendations on good practices for sustainability
(environmental, social and economic aspects) for adventure tourism activities;— ISO 21101: specifies how the adventure tourism organization manages its operations in terms
of safety.NOTE A practical guide for SMEs – ISO 21101, Adventure tourism — Safety management systems is a handbook
that offers step-by-step guidance and examples to help small and medium-sized adventure tourism operators
to develop, implement and continually improve a safety management system following the requirements of
ISO 21101.— ISO 21102: specifies the minimum requirements and recommendations of competencies and the
related expected results of competencies for adventure tourism activity leaders common to any
adventure tourism activity;— ISO 21103: specifies the minimum information that shall be communicated to participants and
potential participants before, during and after the activity.Purpose of this document
Adventure tourism terminology is an important way to align terms to enhance the safe delivery of
adventure tourism activities.This document specifies most common terms and their definitions used in adventure tourism
activities. This document was developed to make easier the understanding of adventure tourism
terms in this market.© ISO 2021 – All rights reserved v
---------------------- Page: 5 ----------------------
DRAFT INTERNATIONAL STANDARD ISO/DIS 3163:2021(E)
Adventure tourism — Terminology
1 Scope
This document establishes the terms commonly used in several adventure tourism activities, including
terms related to safety and services.2 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp— IEC Electropedia: available at http:// www .electropedia .org/
2.1
abseiling
rappeling
adventure tourism activity (2.3) with rope descending techniques, using specific equipment and
proceduresNote 1 to entry: Abseiling inside caves is included in vertical speleotourism (2.35).
2.2adventure speleotourism
adventure tourism activity in caves
2.3
adventure tourism activity
adventure activity for tourism purposes that involves a degree of instruction or leadership, safety
management and an accepted inherent risk...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.