ISO 16484-1:2024

Building automation and control systems (BACS) — Part 1: Project specification and implementation

This document specifies guiding principles for project design and implementation and for the integration of other systems into the building automation and control systems (BACS). This document specifies the phases required for the BACS project, including — design (determination of project requirements and production of design documents including technical specifications), — engineering (detailed function and hardware design), — installation (installing and commissioning of the BACS), and — completion (handover, acceptance and project finalization). This document also specifies the requirements for as-built documentation and training. This document is not applicable to operation and maintenance, nor is it applicable to retro or continuous commissioning, including a commissioning authority.

Systèmes de gestion technique du bâtiment (SGTB) — Partie 1: Spécifications et mise en œuvre d'un projet

Le présent document spécifie les principes directeurs pour la conception et la mise en œuvre du projet ainsi que pour l’intégration d’autres systèmes dans les systèmes de gestion technique du bâtiment (SGTB). Le présent document spécifie les phases requises pour le projet de SGTB, telles que — la conception (détermination des exigences du projet et production des documents de conception incluant les spécifications techniques), — l’ingénierie (conception détaillée des fonctions et du matériel), — l’installation (installation et mise en service du SGTB), et — la finalisation (réception technique, acte de réception technique et achèvement technique du projet). Le présent document spécifie également les exigences relatives à la documentation et à la formation conformes à l’exécution. Le présent document ne s’applique pas au fonctionnement et à la maintenance, ni à la mise en service rétroactive ou à la mise en service continue impliquant une autorité de mise en service.

General Information

• Status: Published
• Publication Date: 15-Jan-2024
• ICS: 35.240.67 - IT applications in building and construction industry
• ICS: 91.040.01 - Buildings in general
• Technical Committee: ISO/TC 205 - Building environment design
• Drafting Committee: ISO/TC 205 - Building environment design
• Current Stage: 6060 - International Standard published
• Start Date: 16-Jan-2024
• Due Date: 03-May-2024
• Completion Date: 16-Jan-2024

Relations

• Consolidates: ISO 2812-3:2019 - Paints and varnishes — Determination of resistance to liquids — Part 3: Method using an absorbent medium
• Effective Date: 25-Jun-2022
• Revises: ISO 16484-1:2010 - Building automation and control systems (BACS) — Part 1: Project specification and implementation
• Effective Date: 06-Jun-2022

Standards Content (Sample)

FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 16484-1
ISO/TC 205
Building automation and control
Secretariat: ANSI
systems (BACS) —
Voting begins on:
2023-09-27
Part 1:
Voting terminates on:
Project specification and
2023-11-22
implementation
Systèmes de gestion technique du bâtiment (SGTB) —
Partie 1: Spécifications et mise en oeuvre d'un projet
ISO/CEN PARALLEL PROCESSING
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 16484-1:2023(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS. © ISO 2023

---------------------- Page: 1 ----------------------
ISO/FDIS 16484-1:2023(E)
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 16484-1
ISO/TC 205
Building automation and control
Secretariat: ANSI
systems (BACS) —
Voting begins on:
Part 1:
Voting terminates on:
Project specification and
implementation
Systèmes de gestion technique du bâtiment (SGTB) —
Partie 1: Spécifications et mise en oeuvre d'un projet
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
ISO/CEN PARALLEL PROCESSING
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
RECIPIENTS OF THIS DRAFT ARE INVITED TO
ISO copyright office
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
CP 401 • Ch. de Blandonnet 8
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
CH-1214 Vernier, Geneva
DOCUMENTATION.
Phone: [phone]
IN ADDITION TO THEIR EVALUATION AS
Reference number
Email: [e-mail]
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 16484-1:2023(E)
Website: www.iso.org
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
Published in Switzerland
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
ii
  © ISO 2023 – All rights reserved
NATIONAL REGULATIONS. © ISO 2023

---------------------- Page: 2 ----------------------
ISO/FDIS 16484-1:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Abbreviated terms . 3
5 Requirements and recommendations . 4
5.1 Overview . 4
5.1.1 General . 4
5.1.2 Phases of the BACS project . 4
5.1.3 Documentation. 5
5.1.4 Trainin
...

ISO/FDIS 16484--1:2023(E)
Date: 2023-05
ISO /TC 205/WG 3
Secretariat: ANSI
Date: 2023-09-13
Building automation and control systems (BACS) —
Part 1:
Project specification and implementation
Systèmes de gestion technique du bâtiment (SGTB) —
Partie 1: Spécifications et mise en oeuvre d'un projet
FDIS stage

---------------------- Page: 1 ----------------------
ISO/FDIS 16484--1:2023(E)
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this
publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical,
including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can
be requested from either ISO at the address below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
EmailE-mail: [e-mail]
Website: www.iso.orgwww.iso.org
Published in Switzerland
ii © ISO 2023 – All rights reserved
ii © ISO 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/FDIS 16484--1:2023(E)
Contents
Foreword . vi
Introduction . viii
Part 1: Project specification and implementation . 1
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Abbreviated terms . 4
5 Requirements and recommendations . 4
5.1 Overview . 4
5.1.1 General . 4
5.1.2 Phases of the BACS project . 4
5.1.3 Documentation . 5
5.1.4 Training . 5
5.1.5 Reviewing and improving building performance . 5
5.1.6 Graphical overview . 6
5.2 Design phase . 8
5.2.1 General . 8
5.2.2 Determination of project requirements . 8
5.2.3 Project planning and organization . 12
5.2.4 Design documents and technical specification . 14
5.2.5 Contract . 15
5.3 Engin
...