ISO 140-3:1995/Amd 1:2004

Acoustics — Measurement of sound insulation in buildings and of building elements — Part 3: Laboratory measurements of airborne sound insulation of building elements — Amendment 1: Installation guidelines for lightweight twin leaf partitions

Acoustique — Mesurage de l'isolement acoustique des immeubles et des éléments de construction — Partie 3: Mesurage en laboratoire de l'affaiblissement des bruits aériens par les éléments de construction — Amendement 1: Conditions particulières de montage des cloisons à doubles parements légers

General Information

• Status: Withdrawn
• Publication Date: 30-Nov-2004
• Withdrawal Date: 30-Nov-2004
• ICS: 91.120.20 - Acoustics in building. Sound insulation
• Technical Committee: ISO/TC 43/SC 2 - Building acoustics
• Drafting Committee: ISO/TC 43/SC 2/WG 18 - Measurement of sound insulation in buildings and of building elements
• Current Stage: 9599 - Withdrawal of International Standard
• Completion Date: 17-Aug-2010

Relations

• Revised: ISO 10140-5:2010 - Acoustics — Laboratory measurement of sound insulation of building elements — Part 5: Requirements for test facilities and equipment
• Effective Date: 15-Apr-2008
• Revised: ISO 10140-2:2010 - Acoustics — Laboratory measurement of sound insulation of building elements — Part 2: Measurement of airborne sound insulation
• Effective Date: 15-Apr-2008
• Revised: ISO 10140-4:2010 - Acoustics — Laboratory measurement of sound insulation of building elements — Part 4: Measurement procedures and requirements
• Effective Date: 15-Apr-2008
• Revised: ISO 10140-3:2010 - Acoustics — Laboratory measurement of sound insulation of building elements — Part 3: Measurement of impact sound insulation
• Effective Date: 15-Apr-2008
• Revised: ISO 10140-1:2010 - Acoustics — Laboratory measurement of sound insulation of building elements — Part 1: Application rules for specific products
• Effective Date: 15-Apr-2008
• Amends: ISO 140-3:1995 - Acoustics — Measurement of sound insulation in buildings and of building elements — Part 3: Laboratory measurements of airborne sound insulation of building elements
• Effective Date: 06-Jun-2022
• Consolidates: ISO 105-N01:1993 - Textiles — Tests for colour fastness — Part N01: Colour fastness to bleaching: Hypochlorite
• Effective Date: 06-Jun-2022
• Child: ISO 140-3:1995 - Acoustics — Measurement of sound insulation in buildings and of building elements — Part 3: Laboratory measurements of airborne sound insulation of building elements
• Effective Date: 15-Apr-2008
• Consolidated By: ISO 14451-4:2013 - Pyrotechnic articles — Pyrotechnic articles for vehicles — Part 4: Requirements and categorization for micro gas generators
• Effective Date: 06-Jun-2022

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 140-3
Second edition
1995-05-15
AMENDMENT 1
2004-12-01



Acoustics — Measurement of sound
insulation in buildings and of building
elements —
Part 3:
Laboratory measurements of airborne
sound insulation of building elements
AMENDMENT 1: Installation guidelines for
lightweight twin leaf partitions
Acoustique — Mesurage de l'isolement acoustique des immeubles et
des éléments de construction —
Partie 3: Mesurage en laboratoire de l'affaiblissement des bruits aériens
par les éléments de construction
AMENDEMENT 1: Conditions particulières de montage des cloisons à
doubles parements légers





Reference number
ISO 140-3:1995/Amd.1:2004(E)
©
ISO 2004

---------------------- Page: 1 ----------------------
ISO 140-3:1995/Amd.1:2004(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2004
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland

ii © ISO 2004 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 140-3:1995/Amd.1:2004(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
...