ISO 11286:2004
(Main)Tea — Classification of grades by particle size analysis
Tea — Classification of grades by particle size analysis
ISO 11286:2004 specifies a method for the classification of grades of tea according to an analysis of their particle size. It is not applicable to large, leafy grades of tea. This method may not be suitable for blends of tea.
Thé — Classification par catégories par analyse granulométrique
General Information
Relations
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 11286
Second edition
2004-02-15
Tea — Classification of grades by particle
size analysis
Thé — Classification par catégories par analyse granulométrique
Reference number
ISO 11286:2004(E)
©
ISO 2004
---------------------- Page: 1 ----------------------
ISO 11286:2004(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2004
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2004 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 11286:2004(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 11286 was prepared by Technical Committee ISO/TC 34, Food products, Subcommittee SC 8, Tea.
This second edition cancels and replaces the first edition (ISO 11286:1997), of which it constitutes a minor
revision. The Scope has been modified to exclude large leafy grades of tea.
© ISO 2004 – All rights reserved iii
---------------------- Page: 3 ----------------------
ISO 11286:2004(E)
Introduction
For many years the tea trade has used various systems for the grading nomenclature of teas according to the
sieves used for sorting the teas. However, a designation given in one country does not always have the same
meaning in another and it was considered by some countries, in particular tea-producing countries, that a
single, international method of classifying tea grades according to their particle size distributions would
facilitate international trade.
The method given in this International Standard provides such a system to supplement the existing traditional
systems.
iv © ISO 2004 – All rights reserved
---------------------- Page: 4 ----------------------
INTERNATIONAL STANDARD ISO 11286:2004(E)
Tea — Classification of grades by particle size analysis
1 Scope
This International Standard specifies a method for the classification of grades of tea according to an analysis
of their particle size. It is not applicable to large, leafy grades of tea.
This method may not be suitable for blends of tea.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 3310-1:1990, Test sieves — Technical requirements and testing — Part 1: Test sieves of metal wire cloth
3 Principle
The tea is separated into diffe
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.