ISO/IEC/IEEE 8802-15-4:2010

Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 15-4: Wireless medium access control (MAC) and physical layer (PHY) specifications for low-rate wireless personal area networks (WPANs)

ISO/IEC/IEEE 8802-15-4:2010 defines the physical layer (PHY) and medium access control (MAC) sublayer specifications for low-data-rate wireless connectivity with fixed, portable, and moving devices with no battery or very limited battery consumption requirements typically operating in the personal operating space (POS) of 10 m.

Technologies de l'information — Télécommunications et échange d'information entre systèmes — Réseaux locaux et métropolitains — Exigences spécifiques — Partie 15-4: Spécifications du contrôle d'accès du milieu sans fil (MAC) et de la couche physique (PHY) pour les réseaux personnels sans fil de faible débit (WPAN)

General Information

• Status: Withdrawn
• Publication Date: 13-Oct-2010
• Withdrawal Date: 13-Oct-2010
• ICS: 35.110 - Networking
• Technical Committee: ISO/IEC JTC 1/SC 6 - Telecommunications and information exchange between systems
• Drafting Committee: ISO/IEC JTC 1/SC 6 - Telecommunications and information exchange between systems
• Current Stage: 9599 - Withdrawal of International Standard
• Completion Date: 08-Mar-2018

Relations

• Revised: ISO/IEC/IEEE 8802-15-4:2018 - Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 15-4: Wireless medium access control (MAC) and physical layer (PHY) specifications for low-rate wireless personal area networks (WPANs)
• Effective Date: 04-Mar-2017

Standards Content (Sample)

INTERNATIONAL ISO/IEC/
STANDARD IEEE
8802-15-4
First edition
2010-10-15

Information technology —
Telecommunications and information
exchange between systems — Local and
metropolitan area networks — Specific
requirements —
Part 15-4:
Wireless medium access control (MAC)
and physical layer (PHY) specifications
for low-rate wireless personal area
networks (WPANs)
Technologies de l'information — Télécommunications et échange
d'information entre systèmes — Réseaux locaux et métropolitains —
Exigences spécifiques —
Partie 15-4: Spécifications du contrôle d'accès du milieu sans fil (MAC)
et de la couche physique (PHY) pour les réseaux personnels sans fil de
faible débit (WPAN)




Reference number
ISO/IEC/IEEE 8802-15-4:2010(E)

©
IEEE 2010

---------------------- Page: 1 ----------------------
ISO/IEC/IEEE 8802-15-4:2010(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. Neither the ISO Central
Secretariat nor IEEE accepts any liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies
and IEEE members. In the unlikely event that a problem relating to it is found, please inform the ISO Central Secretariat or IEEE at the
address given below.

COPYRIGHT PROTECTED DOCUMENT


©  IEEE 2010
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO or IEEE at the respective
address below.
ISO copyright office Institute of Electrical and Electronics Engineers, Inc.
Case postale 56 • CH-1211 Geneva 20 3 Park Avenue, New York • NY 10016-5997, USA
Tel. + 41 22 749 01 11 E-mail [e-mail]
Fax + 41 22 749 09 47 Web www.ieee.org
E-mail [e-mail]
Web www.iso.org
Published in Switzerland

ii © IEEE 2010 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC/IEEE 8802-15-4:2010(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are members of
ISO or IEC participate in the development of International Standards through technical committees established
by the respective organization to deal with particular fields of technical activity. ISO and IEC technical
committees collaborate in fields of mutual interest. Other international organizations, governmental and non-
governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO
and IEC have established a joint technical committee, ISO/IEC JTC 1.
IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating
Committees of the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its standards
through a consensus development process, approved by the American National Standards Institute, which
brings together volunteers representing varied viewpoints and interests to achieve the final product. Volunteers
are not necessarily members of the Institute and serve without compensation. While the IEEE administers the
process and establishes rules to promote fairness in the consensus development process, the IEEE does not
independently evaluate, test, or verify the accuracy of any of the information contained in its standards.
The main task of ISO/IEC JTC 1 is to prepare International Standards. Draft International Standards adopted
by the joint technical committee are circulated to national bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the national bodies casting a vote.
Attention is called to the possibility that implementation of this standard may require the use of subject matter
covered by patent rights. By publication of this standard, no position is taken with respect to the existence or
validity of any patent rights in connection therewith. ISO/IEEE is not responsible for identifying essential
patents or patent claims for which a license may be required, for conducting inquiries into the legal validity or
scope of patents or patent claims or determining whether any licensing terms or conditions provided in
connection with submission of a Letter of Assurance or a Patent Statement and Licensing Declaration Form, if
any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly
advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is
entirely their own responsibility. Further information may be obtained from ISO or the IEEE Standards
Association.
ISO/IEC/IEEE 8802-15-4 was prepared by the LAN/MAN Standards Committee of the IEEE Computer Society
(as IEEE Std 802.15.4-2006). It was adopted by Joint Technical Committee ISO/IEC JTC 1, Information
technology, Subcommittee SC 6, Telecommunications and information exchange between systems, in parallel
with its approval by the ISO/IEC national bodies, under the “fast-track procedure” defined in the Partner
Standards Development Organization cooperation agreement between ISO and IEEE. IEEE is responsible for
the maintenance of this document with participation and input from ISO/IEC national bodies.
ISO/IEC/IEEE 8802 consists of the following parts, under the general title Information technology —
Telecommunications and information exchange between systems — Local and metropolitan area networks —
Specific requirements:
— Part 15-4: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for Low-Rate
Wireless Personal Area Networks (WPANs).
© IEEE 2010 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO/IEC/IEEE 8802-15-4:2010(E)

(blank page)
iv © IEEE 2010 – All rights reserved

---------------------- Page: 4 ----------------------
ISO/IEC/IEEE 8802-15-4:2010(E)

IEEE Standard for
Information technology—
Telecommunications and information
exchange between systems—
Local and metropolitan area networks—
Specific requirements
Part 15.4: Wireless Medium Access Control
(MAC) and Physical Layer (PHY)
Specifications for Low-Rate Wireless
Personal Area Networks (WPANs)
IEEE Computer Society
Sponsored by the
LAN/MAN Standards Committee
I E E E
™
3 Park Avenue IEEE Std 802.15.4 -2006
New York, NY 10016-5997, USA (Revision of
IEEE Std 802.15.4-2003)
8 September 2006
© IEEE 2010 – All rights reserved v

---------------------- Page: 5 ----------------------
ISO/IEC/IEEE 8802-15-4:2010(E)

(blank page)
vi © IEEE 2010 – All rights reserved

---------------------- Page: 6 ----------------------
ISO/IEC/IEEE 8802-15-4:2010(E)

IEEE Std 802.15.4™-2006
(Revision of
IEEE Std 802.15.4-2003)
IEEE Standard for
Information technology—
Telecommunications and information exchange
between systems—
Local and metropolitan area networks—
Specific requirements—
Part 15.4: Wireless Medium Access Control
(MAC) and Physical Layer (PHY)
Specifications for Low-Rate Wireless
Personal Area Networks (WPANs)
Sponsor
LAN/MAN Standards Committee
of the
IEEE Computer Society
Approved 7 June 2006
IEEE-SA Standards Board
Abstract: IEEE Std 802.15.4-2003 defined the protocol and compatible interconnection for data
communication devices using low-data-rate, low-power, and low-complexity short-range radio
frequency (RF) transmissions in a wireless personal area network (WPAN). This revision extends
the market applicability of IEEE Std 802.15.4, removes ambiguities in the standard, and makes
improvements revealed by implementations of IEEE Std 802.15.4-2003.
Keywords: ad hoc network, low data rate, low power, LR-WPAN, mobility, PAN, personal area
network, radio frequency, RF, short range, wireless, wireless personal area network, WPAN
The Institute of Electrical and Electronics Engineers, Inc.
3 Park Avenue, New York, NY 10016-5997, USA
Copyright © 2006 by the Institute of Electrical and Electronics Engineers, Inc.
All rights reserved. Published 8 September 2006. Printed in the United States of America.
IEEE and 802 are registered trademarks in the U.S. Patent & Trademark Office, owned by the Institute of Electrical and
Electronics Engineers, Incorporated.
Print: ISBN 0-7381-4996-9 SH95552
PDF: ISBN 0-7381-4997-7 SS95552
No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior
written permission of the publisher.
© IEEE 2010 – All rights reserved vii

---------------------- Page: 7 ----------------------
ISO/IEC/IEEE 8802-15-4:2010(E)

IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating
Committees of the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its standards
through a consensus development process, approved by the American National Standards Institute, which brings
together volunteers representing varied viewpoints and interests to achieve the final product. Volunteers are not
necessarily members of the Institute and serve without compensation. While the IEEE administers the process and
establishes rules to promote fairness in the consensus development process, the IEEE does not independently
evaluate, test, or verify the accuracy of any of the information contained in its standards.
Use of an IEEE Standard is wholly voluntary. The IEEE disclaims liability for any personal injury, property or
other damage, of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or
indirectly resulting from the publication, use of, or reliance upon this, or any other IEEE Standard document.
The IEEE does not warrant or represent the accuracy or content of the material contained herein, and expressly
disclaims any express or implied warranty, including any implied warranty of merchantability or fitness for a
specific purpose, or that the use of the material contained herein is free from patent infringement. IEEE Standards
documents are supplied “AS IS.”
The existence of an IEEE Standard does not imply that there are no other ways to produce, test, measure,
purchase, market, or provide other goods and services related to the scope of the IEEE Standard. Furthermore, the
viewpoint expressed at the time a standard is approved and issued is subject to change brought about through
developments in the state of the art and comments received from users of the standard. Every IEEE Standard is
subjected to review at least every five years for revision or reaffirmation. When a document is more than five
years old and has not been reaffirmed, it is reasonable to conclude that its contents, although still of some value,
do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest
edition of any IEEE Standard.
In publishing and making this document available, the IEEE is not suggesting or rendering professional or other
services for, or on behalf of, any person or entity. Nor is the IEEE undertaking to perform any duty owed by any
other person or entity to another. Any person utilizing this, and any other IEEE Standards document, should rely
upon the advice of a competent professional in determining the exercise of reasonable care in any given
circumstances.
Interpretations: Occasionally questions may arise regarding the meaning of portions of standards as they relate to
specific applications. When the need for interpretations is brought to the attention of IEEE, the Institute will
initiate action to prepare appropriate responses. Since IEEE Standards represent a consensus of concerned
interests, it is important to ensure that any interpretation has also received the concurrence of a balance of
interests. For this reason, IEEE and the members of its societies and Standards Coordinating Committees are not
able to provide an instant response to interpretation requests except in those cases where the matter has previously
received formal consideration. At lectures, symposia, seminars, or educational courses, an individual presenting
information on IEEE standards shall make it clear that his or her views should be considered the personal views of
that individual rather than the formal position, explanation, or interpretation of the IEEE.
Comments for revision of IEEE Standards are welcome from any interested party, regardless of membership
affiliation with IEEE. Suggestions for changes in documents should be in the form of a proposed change of text,
together with appropriate supporting comments. Comments on standards and requests for interpretations should
be addressed to:
Secretary, IEEE-SA Standards Board
445 Hoes Lane
Piscataway, NJ 08854
USA
Authorization to photocopy portions of any individual standard for internal or personal use is granted by the
Institute of Electrical and Electronics Engineers, Inc., provided that the appropriate fee is paid to Copyright
Clearance Center. To arrange for payment of licensing fee, please contact Copyright Clearance Center, Customer
Service, 222 Rosewood Drive, Danvers, MA 01923 USA; [phone]. Permission to photocopy portions of
any individual standard for educational classroom use can also be obtained through the Copyright Clearance
Center.
viii © IEEE 2010 – All rights reserved

---------------------- Page: 8 ----------------------
ISO/IEC/IEEE 8802-15-4:2010(E)

Introduction
This introduction is not part of IEEE Std 802.15.4-2006, IEEE Standard for Information technology—Telecom-
munications and information exchange between systems—Local and metropolitan area networks—Specific
requirements—Part 15.4: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for
Low-Rate Wireless Personal Area Networks (WPANs).
This standard defines the protocol and interconnection of devices via radio communication in a personal
area network (PAN). The standard uses carrier sense multiple access with collision avoidance (CSMA-CA)
medium access mechanism and supports star as well as peer-to-peer topologies. The media access is
contention based; however, using the optional superframe structure, time slots can be allocated by the PAN
coordinator to devices with time critical data. Connectivity to higher performance networks is provided
through a PAN coordinator.
This revision was initiated to incorporate additional features and enhancements as well as some
simplifications to the 2003 edition of this standard. The standard now includes two optional physical layers
(PHYs) yielding higher data rates in the lower frequency bands and, therefore, specifies the following four
PHYs:
— An 868/915 MHz direct sequence spread spectrum (DSSS) PHY employing binary phase-shift
keying (BPSK) modulation
— An 868/915 MHz DSSS PHY employing offset quadrature phase-shift keying (O-QPSK)
modulation
— An 868/915 MHz parallel sequence spread spectrum (PSSS) PHY employing BPSK and amplitude
shift keying (ASK) modulation
— A 2450 MHz DSSS PHY employing O-QPSK modulation
The 868/915 MHz PHYs support over-the-air data rates of 20 kb/s, 40 kb/s, and optionally 100kb/s and
250kb/s. The 2450 MHz PHY supports an over-the-air data rate of 250 kb/s. The PHY chosen depends on
local regulations and user preference.
This revision also incorporates the following additions and enhancements to the 2003 edition:
— Adds support for a shared time base through the addition of a data time stamping mechanism
— Adds extensions of the 2.4GHz derivative modulation yielding higher data rates at the lower
frequency bands
— Incorporates a mechanism for communicating the revision level on a frame-by-frame basis
— Adds support for beacon scheduling
— Allows synchronization of broadcast messages in beacon-enabled PANs
— Improves usage of security suite
Also, this revision incorporates the following changes and simplifications:
— Makes GTS support optional
— Removes restrictions for manually enabling the receiver
— Simplifies passive and active scan procedures
— Allows for more flexibility in the CSMA-CA algorithm
— Reduces association time in nonbeacon networks
This revision is backward-compatible to the 2003 edition; in other words, devices conforming to this
standard are capable of joining and functioning in a PAN composed of devices conforming to
IEEE Std 802.15.4-2003.
© IEEE 2010 – All rights reserved ix

---------------------- Page: 9 ----------------------
ISO/IEC/IEEE 8802-15-4:2010(E)

Notice to users
Errata
Errata, if any, for this and all other standards can be accessed at the following URL: http://
standards.ieee.org/reading/ieee/updates/errata/index.html. Users are encouraged to check this URL for
errata periodically.
Interpretations
Current interpretations can be accessed at the following URL: http://standards.ieee.org/reading/ieee/interp/
index.html.
Patents
Attention is called to the possibility that implementation of this standard may require use of subject matter
covered by patent rights. By publication of this standard, no position is taken with respect to the existence or
validity of any patent rights in connection therewith. The IEEE shall not be responsible for identifying
patents or patent applications for which a license may be required to implement an IEEE standard or for
conducting inquiries into the legal validity or scope of those patents that are brought to its attention.
x © IEEE 2010 – All rights reserved

---------------------- Page: 10 ----------------------
ISO/IEC/IEEE 8802-15-4:2010(E)
Contents
1. Overview. 1
1.1 General. 1
1.2 Scope. 1
1.3 Purpose. 2
2. Normative references. 3
3. Definitions . 5
4. Acronyms and abbreviations . 9
5. General description . 13
5.1 Introduction. 13
5.2 Components of the IEEE 802.15.4 WPAN. 13
5.3 Network topologies. 14
5.3.1 Star network formation . 14
5.3.2 Peer-to-peer network formation. 15
5.4 Architecture . 15
5.4.1 Physical layer (PHY) . 17
5.4.2 MAC sublayer. 17
5.5 Functional overview . 17
5.5.1 Superframe structure. 17
5.5.2 Data transfer model.18
5.5.2.1 Data transfer to a coordinator . 19
5.5.2.2 Data transfer from a coordinator. 20
5.5.2.3 Peer-to-peer data transfers . 21
5.5.3 Frame structure . 21
5.5.3.1 Beacon frame . 21
5.5.3.2 Data frame. 22
5.5.3.3 Acknowledgment frame. 22
5.5.3.4 MAC command frame . 23
5.5.4 Improving probability of successful delivery . 23
5.5.4.1 CSMA-CA mechanism . 23
5.5.4.2 Frame acknowledgment. 24
5.5.4.3 Data verification . 24
5.5.5 Power consumption considerations . 24
5.5.6 Security . 24
5.6 Concept of primitives. 25
6. PHY specification . 27
6.1 General requirements and definitions . 27
6.1.1 Operating frequency range. 27
6.1.2 Channel assignments. 28
6.1.2.1 Channel numbering. 29
6.1.2.2 Channel pages . 29
6.1.3 Minimum long interframe spacing (LIFS) and short interframe spacing
(SIFS) periods . 30
© IEEE 2010 – All rights reserved xi
Copyright © 2006 IEEE. All rights reserved.

---------------------- Page: 11 ----------------------
ISO/IEC/IEEE 8802-15-4:2010(E)
6.1.4 RF power measurement . 31
6.1.5 Transmit power . 31
6.1.6 Out-of-band spurious emission. 31
6.1.7 Receiver sensitivity definitions. 31
6.2 PHY service specifications . 31
6.2.1 PHY data service .32
6.2.1.1 PD-DATA.request . 32
6.2.1.2 PD-DATA.confirm . 33
6.2.1.3 PD-DATA.indication. 34
6.2.2 PHY management service. 34
6.2.2.1 PLME-CCA.request. 35
6.2.2.2 PLME-CCA.confirm. 35
6.2.2.3 PLME-ED.request. 36
6.2.2.4 PLME-ED.confirm . 36
6.2.2.5 PLME-GET.request . 37
6.2.2.6 PLME-GET.confirm . 38
6.2.2.7 PLME-SET-TRX-STATE.request. 39
6.2.2.8 PLME-SET-TRX-STATE.confirm. 40
6.2.2.9 PLME-SET.request. 40
6.2.2.10 PLME-SET.confirm. 41
6.2.3 PHY enumerations description . 42
6.3 PPDU format. 43
6.3.1 Preamble field . 43
6.3.2 SFD field. 44
6.3.3 Frame Length field.45
6.3.4 PSDU field. 45
6.4 PHY constants and PIB attributes. 45
6.4.1 PHY constants. 45
6.4.2 PHY PIB attributes . 45
6.5 2450 MHz PHY specifications .47
6.5.1 Data rate. 47
6.5.2 Modulation and spreading . 47
6.5.2.1 Reference modulator diagram. 47
6.5.2.2 Bit-to-symbol mapping . 47
6.5.2.3 Symbol-to-chip mapping . 47
6.5.2.4 O-QPSK modulation. 48
6.5.2.5 Pulse shape. 49
6.5.2.6 Chip transmission order . 49
6.5.3 2450 MHz band radio specification. 49
6.5.3.1 Transmit power spectral density (PSD) mask. 49
6.5.3.2 Symbol rate . 49
6.5.3.3 Receiver sensitivity. 49
6.5.3.4 Receiver jamming resistance . 50
6.6 868/915 MHz band binary phase-shift keying (BPSK) PHY specifications . 50
6.6.1 868/915 MHz band data rates . 50
6.6.2 Modulation and spreading . 50
6.6.2.1 Reference modulator diagram. 50
6.6.2.2 Differential encoding . 51
6.6.2.3 Bit-to-chip mapping. 51
6.6.2.4 BPSK modulation .
...