Corrosion of metals and alloys — Performance test method for corrosion inhibitors used in chemical cleaning of industry equipment

This document specifies the performance evaluation test method for corrosion inhibitors used in chemical cleaning of industry equipment. It includes instruments, reagents, preparation and pretreatment of the specimen, test conditions, test methods, reports, etc. The performance evaluation test method includes the static or the dynamic test. This document is applicable to testing the performance of corrosion inhibitors used in chemical cleaning of industry equipment.

Corrosion des métaux et des alliages — Méthode d'essai de performance pour les inhibiteurs de corrosion utilisés dans le nettoyage chimique des équipements industriels

General Information

Status
Published
Publication Date
19-Oct-2023
Current Stage
6060 - International Standard published
Start Date
20-Oct-2023
Due Date
08-Nov-2024
Completion Date
20-Oct-2023
Ref Project

Buy Standard

Standard
ISO 9813:2023 - Corrosion of metals and alloys — Performance test method for corrosion inhibitors used in chemical cleaning of industry equipment Released:20. 10. 2023
English language
12 pages
sale 15% off
Preview
sale 15% off
Preview
Draft
ISO/PRF 9813 - Corrosion of metals and alloys — Performance test method for corrosion inhibitors used in chemical cleaning of industry equipment Released:15. 08. 2023
English language
10 pages
sale 15% off
Preview
sale 15% off
Preview
Draft
REDLINE ISO/PRF 9813 - Corrosion of metals and alloys — Performance test method for corrosion inhibitors used in chemical cleaning of industry equipment Released:15. 08. 2023
English language
10 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 9813
First edition
2023-10
Corrosion of metals and alloys —
Performance test method for
corrosion inhibitors used in chemical
cleaning of industry equipment
Corrosion des métaux et des alliages — Méthode d'essai de
performance pour les inhibiteurs de corrosion utilisés dans le
nettoyage chimique des équipements industriels
Reference number
ISO 9813:2023(E)
© ISO 2023

---------------------- Page: 1 ----------------------
ISO 9813:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
  © ISO 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 9813:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Apparatus . 2
4.1 Container used in the static test below 100 °C . 2
4.2 Container used in the static test above 100 °C . 2
4.3 Dynamic test device . 2
4.4 Specimen suspending device . 3
4.5 Constant temperature device . 3
4.6 Oven. 3
4.7 Analytical balance . 4
4.8 Vernier caliper . 4
4.9 Magnifier . 4
4.10 Colorimetric tube . 4
4.11 Pipette . 4
5 Reagents and materials . 4
5.1 Experimental w
...

INTERNATIONAL ISO
STANDARD 9813
First edition
Corrosion of metals and alloys —
Performance test method for
corrosion inhibitors used in chemical
cleaning of industry equipment
PROOF/ÉPREUVE
Reference number
ISO 9813:2023(E)
© ISO 2023

---------------------- Page: 1 ----------------------
ISO 9813:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
PROOF/ÉPREUVE © ISO 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 9813:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Apparatus . 1
4.1 Container used in the static test below 100 °C . 1
4.2 Container used in the static test above 100 °C . 2
4.3 Dynamic test device . 2
4.4 Specimen suspending device . 3
4.5 Constant temperature device . 3
4.6 Oven. 3
4.7 Analytical balance . 3
4.8 Vernier caliper . 3
4.9 Magnifier . 3
4.10 Colorimetric tube . 3
4.11 Pipette . 3
5 Reagents and materials . 3
5.1 Experimental water .
...

ISO/TC156 N7422
ISOPRF 9813:2023(E)
2023-07-14
ISO /TC 156
Secretariat: SAC
Date: 2023-08-14
Corrosion of metals and alloys — Performance test method for
corrosion inhibitors used in chemical cleaning of industry
equipment
FDIS stage
© ISO 2023 – All rights reserved

---------------------- Page: 1 ----------------------
ISO/PRF 9813:2023(E)
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this
publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical,
including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can
be requested from either ISO at the address below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
Fax: +41 22 749 09 47
EmailE-mail: copyright@iso.org
Website: www.iso.orgwww.iso.org
Published in Switzerland
ii © ISO 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/PRF 9813:2023(E)
Contents
Foreword . v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Apparatus . 1
4.1 Container used in the static test below 100 °C . 1
4.2 Container used in the static test above 100 °C . 2
4.3 Dynamic test device . 2
4.4 Specimen suspending device . 4
4.5 Constant temperature device . 4
4.6 Oven . 4
4.7 Analytical balance . 4
4.8 Vernier caliper . 4
4.9 Magnifier . 4
4.10 Colorimetric tube . 4
4.11 Pipette . 4
5 Reagents and materials . 4
5.1 Experimental water . 4
5.2 Acetone . 4
5.3 Ethanol .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.