ISO 29782:2022

Prostheses and orthoses — Factors to be considered when specifying a prosthesis for a person who has had a lower limb amputation

This document lists factors to be considered when specifying a prosthesis for a person who has had a lower limb amputation.

Prothèses et orthèses — Facteurs à prendre en considération lors de la spécification d'une prothèse pour une personne ayant subi une amputation d'un membre inférieur

General Information

• Status: Published
• Publication Date: 18-Dec-2022
• ICS: 11.040.40 - Implants for surgery, prosthetics and orthotics
• Technical Committee: ISO/TC 168 - Prosthetics and orthotics
• Drafting Committee: ISO/TC 168/WG 1 - Nomenclature and classification
• Current Stage: 6060 - International Standard published
• Start Date: 19-Dec-2022
• Due Date: 05-Dec-2022
• Completion Date: 19-Dec-2022

Relations

• Revises: ISO 29782:2008 - Prostheses and orthoses — Factors to be considered when specifying a prosthesis for a person who has had a lower limb amputation
• Effective Date: 23-Apr-2020

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 29782
Second edition
2022-12
Prostheses and orthoses — Factors
to be considered when specifying a
prosthesis for a person who has had a
lower limb amputation
Prothèses et orthèses — Facteurs à prendre en considération lors
de la spécification d'une prothèse pour une personne ayant subi une
amputation d'un membre inférieur
Reference number
ISO 29782:2022(E)
© ISO 2022

---------------------- Page: 1 ----------------------
ISO 29782:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
  © ISO 2022 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 29782:2022(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Stump characteristics . 1
4.1 General . 1
4.2 Length and shape . 2
4.3 Soft tissues . 2
4.4 Skin . 2
4.5 Circulation . 2
4.6 Pain . 2
4.7 Proximal joint(s) . . 2
5 General physical characteristics . 3
6 General clinical conditions . 3
7 Functional capabilities . 4
8 Motivation and perceived needs .4
9 Anticipated activity .4
9.1 Mobility . 4
9.2 Vocational activities . 4
9.3 Sporting and recreational activities . 4
9.4 Social and cultural activities . 4
10 Environmental conditions . 5
11 Locally available supply and maintenance . 5
12 Social and economic circumstances. 5
iii
© ISO 2022 – All rights reserved

---------------------- Page: 3 ----------------------
ISO 29782:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World
...