ISO 8297:1994/Amd 1:2021

Acoustics — Determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment — Engineering method — Amendment 1

Acoustique — Détermination des niveaux de puissance acoustique d'installations industrielles multisources pour l'évaluation des niveaux de pression acoustique dans l'environnement — Méthode d'expertise — Amendement 1

General Information

• Status: Published
• Publication Date: 15-Apr-2021
• ICS: 17.140.20 - Noise emitted by machines and equipment
• Technical Committee: ISO/TC 43/SC 1 - Noise
• Drafting Committee: ISO/TC 43/SC 1/WG 28 - Basic machinery noise emission standards
• Current Stage: 6060 - International Standard published
• Start Date: 16-Apr-2021
• Due Date: 22-Oct-2020
• Completion Date: 16-Apr-2021

Relations

• Amends: ISO 8297:1994 - Acoustics — Determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment — Engineering method
• Effective Date: 24-Jul-2021

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 8297
First edition
1994-12-15
AMENDMENT 1
2021-04
Acoustics — Determination of sound
power levels of multisource industrial
plants for evaluation of sound
pressure levels in the environment —
Engineering method
AMENDMENT 1
Acoustique — Détermination des niveaux de puissance acoustique
d'installations industrielles multisources pour l'évaluation des
niveaux de pression acoustique dans l'environnement — Méthode
d'expertise
AMENDEMENT 1
Reference number
ISO 8297:1994/Amd.1:2021(E)
©
ISO 2021

---------------------- Page: 1 ----------------------
ISO 8297:1994/Amd.1:2021(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 8297:1994/Amd.1:2021(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 43, Acoustics, Subcommittee SC 1, Noise.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.
© ISO 2021 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 8297:1994/Amd.1:2021(E)
Acoustics — Determination of sound power levels of
multisource industrial plants for evaluation of sound
pressure levels in the environment — Engineering method
AMENDMENT 1

0.1, third paragraph
Replace "ISO 2204" with "ISO 12001".

Clause 2, Normative references
Replace "ISO 266:1975, Preferred frequencies for measurements." with:
"ISO 266, Acoustics – Preferred frequencies"
Replace "ISO 1996-1:1982, Acoustics – Description and measurement of environmental noise – Part 1: Basic
quantities and procedures." with:
"ISO 1996-1, Acoustics –
...

FINAL
ISO
AMENDMENT
DRAFT
8297:1994
FDAM 1
ISO/TC 43/SC 1
Acoustics — Determination of sound
Secretariat: DIN
power levels of multisource industrial
Voting begins on:
2021­01­26 plants for evaluation of sound
pressure levels in the environment —
Voting terminates on:
2021­03­23
Engineering method
AMENDMENT 1
Acoustique — Détermination des niveaux de puissance acoustique
d'installations industrielles multisources pour l'évaluation des
niveaux de pression acoustique dans l'environnement — Méthode
d'expertise
AMENDEMENT 1
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO­
ISO 8297:1994/FDAM 1:2021(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN­
DARDS TO WHICH REFERENCE MAY BE MADE IN
©
NATIONAL REGULATIONS. ISO 2021

---------------------- Page: 1 ----------------------
ISO 8297:1994/FDAM 1:2021(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH­1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 8297:1994/FDAM 1:2021(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non­governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 43, Acoustics, Subcommittee SC 1, Noise.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.
© ISO 2021 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 8297:1994/FDAM 1:2021(E)
Acoustics — Determination of sound power levels of
multisource industrial plants for evaluation of sound
pressure levels in the environment — Engineering method
AMENDMENT 1

0.1, third paragraph
Replace "ISO 2204" with "ISO 12001".

Clause 2, Normative references
Repl
...