Graphic technology — Assessment and validation of the performance of spectrocolorimeters and spectrodensitometers

This document describes procedures for the assessment and validation of the performance of an optical spectrometer intended for use in capturing the spectral reflectance factor or the spectral radiance factor of printed areas comprised of non-fluorescent or fluorescent materials, respectively. While it does not describe the application to transmitting materials directly, many of the procedures can be applied to transmitting systems by backing them with a reflective white backing material. This document does not address spectral measurements appropriate to other specific application needs, such as those used during the production of materials (e.g. printing paper and proofing media), which are well described by ISO standards under the jurisdiction of ISO/TC 6. It does not describe the special requirements for testing instruments that make in-process or online colour measurements.

Titre manque

Grafična tehnologija - Ocenjevanje in potrjevanje učinkovitosti spektrokolorimetrov in spektrodensitometrov

General Information

Status
Published
Publication Date
26-Aug-2020
Current Stage
9093 - International Standard confirmed
Completion Date
28-Dec-2023

Buy Standard

Technical specification
TS ISO/TS 23031:2021 - BARVE
English language
25 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Technical specification
ISO/TS 23031:2020 - Graphic technology -- Assessment and validation of the performance of spectrocolorimeters and spectrodensitometers
English language
19 pages
sale 15% off
Preview
sale 15% off
Preview
Draft
ISO/PRF TS 23031 - Graphic technology -- Assessment and validation of the performance of spectrocolorimeters and spectrodensitometers
English language
19 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS ISO/TS 23031:2021
01-julij-2021
Grafična tehnologija - Ocenjevanje in potrjevanje učinkovitosti
spektrokolorimetrov in spektrodensitometrov
Graphic technology - Assessment and validation of the performance of
spectrocolorimeters and spectrodensitometers
Ta slovenski standard je istoveten z: ISO/TS 23031:2020
ICS:
37.100.01 Grafična tehnologija na Graphic technology in
splošno general
SIST-TS ISO/TS 23031:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST-TS ISO/TS 23031:2021

---------------------- Page: 2 ----------------------
SIST-TS ISO/TS 23031:2021
TECHNICAL ISO/TS
SPECIFICATION 23031
First edition
2020-08
Graphic technology — Assessment
and validation of the performance
of spectrocolorimeters and
spectrodensitometers
Reference number
ISO/TS 23031:2020(E)
©
ISO 2020

---------------------- Page: 3 ----------------------
SIST-TS ISO/TS 23031:2021
ISO/TS 23031:2020(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved

---------------------- Page: 4 ----------------------
SIST-TS ISO/TS 23031:2021
ISO/TS 23031:2020(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Known practices for instrument characterization. 6
4.1 Repeatability . 6
4.1.1 General. 6
4.1.2 Procedures . 6
4.2 Reproducibility . 7
4.2.1 General. 7
4.2.2 Determination of temporal reproducibility . 8
4.2.3 Determination of instrument reproducibility .10
4.2.4 Data collection and analysis .11
4.3 Accuracy .12
4.4 Quality of the influx spectrum .
...

TECHNICAL ISO/TS
SPECIFICATION 23031
First edition
2020-08
Graphic technology — Assessment
and validation of the performance
of spectrocolorimeters and
spectrodensitometers
Reference number
ISO/TS 23031:2020(E)
©
ISO 2020

---------------------- Page: 1 ----------------------
ISO/TS 23031:2020(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/TS 23031:2020(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Known practices for instrument characterization. 6
4.1 Repeatability . 6
4.1.1 General. 6
4.1.2 Procedures . 6
4.2 Reproducibility . 7
4.2.1 General. 7
4.2.2 Determination of temporal reproducibility . 8
4.2.3 Determination of instrument reproducibility .10
4.2.4 Data collection and analysis .11
4.3 Accuracy .12
4.4 Quality of the influx spectrum .12
5 Reference materials for assessment of performance .13
5.1 Reference materials for comparison to the manufacturer’s specifications .13
5.2 Reference materials for comparison between identical models .15
5.2.1 General.15
5.3 Reference materials for comparison between different models .15
5.3.1 General.
...

TECHNICAL ISO/TS
SPECIFICATION 23031
First edition
Graphic technology — Assessment
and validation of the performance
of spectrocolorimeters and
spectrodensitometers
PROOF/ÉPREUVE
Reference number
ISO/TS 23031:2020(E)
©
ISO 2020

---------------------- Page: 1 ----------------------
ISO/TS 23031:2020(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii PROOF/ÉPREUVE © ISO 2020 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/TS 23031:2020(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Known practices for instrument characterization. 6
4.1 Repeatability . 6
4.1.1 General. 6
4.1.2 Procedures . 6
4.2 Reproducibility . 7
4.2.1 General. 7
4.2.2 Determination of temporal reproducibility . 8
4.2.3 Determination of instrument reproducibility .10
4.2.4 Data collection and analysis .11
4.3 Accuracy .12
4.4 Quality of the influx spectrum .12
5 Reference materials for assessment of performance .13
5.1 Reference materials for comparison to the manufacturer’s specifications .13
5.2 Reference materials for comparison between identical models .15
5.2.1 General.15
5.3 Reference materials for comparison between different models .15
5.3.1 General.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.