ISO/IEC 19763-12:2015/Amd 1:2023

Information technology — Metamodel framework for interoperability (MFI) — Part 12: Metamodel for information model registration — Amendment 1: Alignment with Edition 4 of ISO/IEC 11179-3

Technologies de l'information — Cadre du métamodèle pour l'interopérabilité (MFI) — Partie 12: Métamodèle pour l'enregistrement du modèle d'information — Amendement 1: Alignement avec l'édition 4 de l'ISO/IEC 11179-3

General Information

• Status: Published
• Publication Date: 06-Dec-2023
• ICS: 35.040.50 - Automatic identification and data capture techniques
• Technical Committee: ISO/IEC JTC 1/SC 32 - Data management and interchange
• Drafting Committee: ISO/IEC JTC 1/SC 32 - Data management and interchange
• Current Stage: 6060 - International Standard published
• Start Date: 07-Dec-2023
• Due Date: 04-Jul-2025
• Completion Date: 07-Dec-2023

Relations

• Amends: ISO/IEC 19763-12:2015 - Information technology — Metamodel framework for interoperability (MFI) — Part 12: Metamodel for information model registration
• Effective Date: 07-Jul-2022

Standards Content (Sample)

INTERNATIONAL ISO/IEC
STANDARD 19763-12
First edition
2015-03-15
AMENDMENT 1
2023-12
Information technology — Metamodel
framework for interoperability
(MFI) —
Part 12:
Metamodel for information model
registration
AMENDMENT 1: Alignment with Edition
4 of ISO/IEC 11179-3
Technologies de l'information — Cadre du métamodèle pour
l'interopérabilité (MFI) —
Partie 12: Métamodèle pour l'enregistrement du modèle
d'information
AMENDEMENT 1: Alignement avec l'édition 4 de l'ISO/IEC 11179-3
Reference number
ISO/IEC 19763-12:2015/Amd. 1:2023(E)
© ISO/IEC 2023

---------------------- Page: 1 ----------------------
ISO/IEC 19763-12:2015/Amd. 1:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
  © ISO/IEC 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC 19763-12:2015/Amd. 1:2023(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are
members of ISO or IEC participate in the development of International Standards through technical
committees established by the respective organization to deal with particular fields of technical
activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international
organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the
work.
The procedures used to develop this document and those intended for its further maintenance
are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria
needed for the different types of document should be noted. This document was drafted in
accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives or
www.iec.ch/members_experts/refdocs).
ISO and IEC draw attention to the possibility that the implementation of this document may involve the
use of (a) patent(s). ISO and IEC take no position concerning the evidence, validity or applicability of
any claimed patent rights in respect thereof. As of the date of publication of this document, ISO and IEC
had not received notice of (a) patent(s) which may be required to implement this document. However,
implementers are cautioned that this may not represent the latest information, which may be obtained
from the patent database ava
...

INTERNATIONAL ISO/IEC
STANDARD 19763-12
First edition
2015-03-15
AMENDMENT 1
Information technology — Metamodel
framework for interoperability
(MFI) —
Part 12:
Metamodel for information model
registration
AMENDMENT 1: Alignment with Edition
4 of ISO/IEC 11179-3
PROOF/ÉPREUVE
Reference number
ISO/IEC 19763-12/Amd. 1:2023(E)
© ISO/IEC 2023

---------------------- Page: 1 ----------------------
ISO/IEC 19763-12/Amd. 1:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
PROOF/ÉPREUVE © ISO/IEC 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC 19763-12/Amd. 1:2023(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are
members of ISO or IEC participate in the development of International Standards through technical
committees established by the respective organization to deal with particular fields of technical
activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international
organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the
work.
The procedures used to develop this document and those intended for its further maintenance
are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria
needed for the different types of document should be noted. This document was drafted in
accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives or
www.iec.ch/members_experts/refdocs).
ISO and IEC draw attention to the possibility that the implementation of this document may involve the
use of (a) patent(s). ISO and IEC take no position concerning the evidence, validity or applicability of
any claimed patent rights in respect thereof. As of the date of publication of this document, ISO and IEC
had not received notice of (a) patent(s) which may be required to implement this document. However,
implementers are cautioned that this may not represent the latest information, which may be obtained
from the patent database available at www.iso.org/patents and https://patents.iec.ch. ISO and IEC shall
not be held responsible for identifying any or al
...

2023-09-20
ISO/IEC 19763-12:2015/DAMPRF Amd 1:2023(E)
ISO/IEC JTC 1/SC 32/WG 2
Secretariat: ANSI
Date: 2023-10-12
Information technology — Metamodel framework for
interoperability (MFI) —

Part 12:
Metamodel for information model registration
AMENDMENT 1: Alignment with Edition 4 of ISO/IEC 11179-3
FDIS stage
© ISO/IEC 2023 – All rights reserved

---------------------- Page: 1 ----------------------
ISO/IEC 19763-12:2015/DAMPRF Amd 1:2023(E)
© ISO 2023/IEC 2015
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this
publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical,
including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can
be requested from either ISO at the address below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
Fax: [phone]
EmailE-mail: [e-mail]
Website: www.iso.orgwww.iso.org
Published in Switzerland
ii © ISO/IEC 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC 19763-12:2015/DAMPRF Amd 1:2023(E)
Foreword
ISO (the International Organization for Standardization) is a and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide federation of national
standardsstandardization. National bodies (that are members of ISO member bodies). The workor IEC
participate in the development of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has
been established has the right to be represented on that committee. Internationalby the respective
organization to deal with particular fields of technical activity. ISO and IEC technical committees
collaborate in fields of mutual interest. Other international organizations, governmental and non-
governmental, in liaison with ISO and IEC, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documentsdocument should be noted. This document was drafted in accordance
with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives 2 (see
www.iso.org/directives or www.iec.ch/members_experts/refdocs).
Attention is drawnISO and IEC draw attention to the possibility that some of the elementsimplementation
of this document may beinvolve the subjectuse of (a) patent rights. ISO(s). ISO and IEC take no position
concerning the evidence, validity or applicability of any claimed patent rights in respect thereof. As of the
date of publication of this document, ISO and IEC had not received notice of (a) patent(s) which may be
required to implement this document. However, implementers are cautioned that this may
...