iTeh Standards logo
EURUSD
Your shopping cart is empty.
ISO

ISO 1628-2:1988

(Main)

Plastics - Determination of viscosity number and limiting viscosity number - Part 2: Poly(vinyl chloride) resins

Plastics - Determination of viscosity number and limiting viscosity number - Part 2: Poly(vinyl chloride) resins

Plastiques — Détermination de l'indice de viscosité et de l'indice limite de viscosité — Partie 2: Résines de poly(chlorure de vinyle)

Polimerni materiali - Določanje viskoznostnega števila in mejnega viskoznostnega števila - 2. del: Polivinilklorid

General Information

Status
Withdrawn
Publication Date
28-Dec-1988
Withdrawal Date
28-Dec-1988
ICS
83.080.20 - Thermoplastic materials
Technical Committee
ISO/TC 61/SC 9 - Thermoplastic materials
Drafting Committee
ISO/TC 61/SC 9/WG 20 - Poly(vinyl chloride)
Current Stage
9599 - Withdrawal of International Standard
Start Date
10-Dec-1998
Completion Date
13-Dec-2025
Ref Project
SIST ISO 1628-2:1996 - Plastics -- Determination of viscosity number and limiting viscosity number -- Part 2: Poly(vinyl chloride) resins

Relations

Revises
ISO 174:1974 - Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of viscosity number in dilute solution
Effective Date
15-Apr-2008
Revised
ISO 1628-2:1998 - Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 2: Poly(vinyl chloride) resins
Effective Date
15-Apr-2008
ISO 1628-2:1996ISO 1628-2:1996
PreviousNext
Standard
ISO 1628-2:1996
English language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
ISO 1628-2:1988 - Plastics — Determination of viscosity number and limiting viscosity number — Part 2: Poly(vinyl chloride) resins Released:12/29/1988ISO 1628-2:1988 - Plastics — Determination of viscosity number and limiting viscosity number — Part 2: Poly(vinyl chloride) resins Released:12/29/1988
PreviousNext
Standard
ISO 1628-2:1988 - Plastics — Determination of viscosity number and limiting viscosity number — Part 2: Poly(vinyl chloride) resins Released:12/29/1988
English language
2 pages
sale 15% off
Preview
sale 15% off
Preview

Frequently Asked Questions

ISO 1628-2:1988 is a standard published by the International Organization for Standardization (ISO). Its full title is "Plastics - Determination of viscosity number and limiting viscosity number - Part 2: Poly(vinyl chloride) resins". This standard covers: Plastics - Determination of viscosity number and limiting viscosity number - Part 2: Poly(vinyl chloride) resins

Plastics - Determination of viscosity number and limiting viscosity number - Part 2: Poly(vinyl chloride) resins

ISO 1628-2:1988 is classified under the following ICS (International Classification for Standards) categories: 83.080.20 - Thermoplastic materials. The ICS classification helps identify the subject area and facilitates finding related standards.

ISO 1628-2:1988 has the following relationships with other standards: It is inter standard links to ISO 174:1974, ISO 1628-2:1998. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

You can purchase ISO 1628-2:1988 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of ISO standards.

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Plastiques -- Détermination de l'indice de viscosité et de l'indice limite de viscosité -- Partie 2: Résines de poly(chlorure de vinyle)Plastics -- Determination of viscosity number and limiting viscosity number -- P
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

This May Also Interest You

ISO
ISO 182-3:2025(Main)
Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 3: Conductometric method

This document specifies a method for the determination of the thermal stability at elevated temperature of compounds and products based on vinyl chloride homopolymers and copolymers (in the following text abbreviated as PVC) which undergo dehydrochlorination (the evolution of hydrogen chloride). This document is applicable to the characterization of PVC compounds and products, especially with regard to the effectiveness of their heat-stabilizing systems. It is applicable to coloured PVC compounds and products where a discolouration test under the action of heat can be unsatisfactory. This document is applicable to compounded PVC materials and products. It can be applicable to polymers in powder form under appropriate conditions, depending on the agreement between the interested parties. This document does not apply to PVC compounds in the form of dry blends, since such materials might not be sufficiently homogeneous. This document does not apply to PVC compounds and products which evolve other decomposition products, in addition to hydrogen chloride, at elevated temperatures that can affect the conductivity of water when they are absorbed into it. NOTE In this case, ISO 182-4 [2] provides the suitable method for the determination of chloride ion (Cl−) in the absorbing solution. This document can also be applied to other plastics materials which can evolve hydrogen chloride or other hydrogen halides when heated under the conditions prescribed by the relevant specifications, or as agreed upon between the interested parties.

  • Standard
    18 pages
    English language
    sale 15% off
  • Standard
    19 pages
    French language
    sale 15% off
ISO
ISO 4504:2025(Main)
Plastics - Polyethylene (PE) - Determination of co-monomer content by solution state 13C-NMR spectrometry

This document specifies two methods for the determination of co-monomer contents of polyethylene products by solution state 13C-NMR spectrometry (nuclear magnetic resonance spectrometry): - Method A: inverse gated decoupling method; - Method B: insensitive nuclei enhanced by polarization transfer method. This document is applicable to copolymers of ethylene having a content of other 1-olefinic monomers of less than a mass fraction of 50 %. This document is not applicable to ethylene homopolymers or copolymers in which ethylene is polymerized with two or more type 1-olefin comonomers.

  • Standard
    28 pages
    English language
    sale 15% off
ISO
ISO 18177:2025(Main)
Plastics - Test method for estimation of the short chain branching distribution of semicrystalline ethylene 1-olefin copolymers - Differential scanning calorimetry (DSC)

This document specifies a test method for the estimation of the short chain branching distribution of semicrystalline ethylene 1-olefin copolymers by successive self-nucleation and annealing (SSA) with conventional, high performance and fast differential scanning calorimetry. This document is applicable to the estimation of the short chain branching distribution of raw materials of semicrystalline ethylene 1-olefin copolymers and its products. Quantitative calculation of short chain branching content, degree of crystallinity and short chain branching distribution is applicable to ethylene/1-butene copolymers, ethylene/1-hexene copolymers and ethylene/1-octene copolymers.

  • Standard
    20 pages
    English language
    sale 15% off
ISO
ISO 16365-1:2025(Main)
Plastics - Thermoplastic polyurethanes for moulding and extrusion - Part 1: Designation system and basis for specifications

This document establishes a system of designation for thermoplastic polyurethane elastomers. The designation system can be used as the basis for specifications. The designation system is applicable to all thermoplastic polyurethane elastomers. It applies to materials ready for normal use in the form of powder, granules or pellets, unmodified or modified by colourants, fillers or other additives, etc. This document does not intend to imply that materials having the same designation give necessarily the same performance. This document does not provide engineering data, performance data, or data on processing conditions which might be required to specify a material for a particular application and/or method of processing. NOTE If such additional properties are required, they can be determined according to the test methods specified in ISO 16365-2, if suitable.

  • Standard
    8 pages
    English language
    sale 15% off
ISO
ISO 15373:2024(Main)
Plastics - Polymer dispersions - Determination of free formaldehyde

This document specifies two methods for the determination of free formaldehyde (HCHO) in polymer dispersions. This document is applicable to acrylic, acrylonitrile butadiene, carboxylated styrene-butadiene and vinyl acetate polymer dispersions. It is also applicable to polymer dispersions of other compositions. Method A (UV/Vis spectrometer method) is applicable to polymer dispersions with a free-formaldehyde content higher than 10 mg/kg. Method B (HPLC method) is applicable for determining lower formaldehyde contents or carrying out arbitration analyses.

  • Standard
    13 pages
    English language
    sale 15% off
ISO
ISO 19069-2:2024(Main)
Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties

This document specifies the methods of preparation of test specimens and the test methods for determining the properties of polypropylene (PP) moulding and extrusion materials. It gives requirements for handling test material and for conditioning both the test material before moulding and the specimens before testing. This document specifies procedures and conditions for the preparation of test specimens, and procedures for measuring properties of the materials from which these specimens are made. Properties and test methods which are suitable and essential to characterize PP moulding and extrusion materials are listed. The properties have been selected from the general test methods in ISO 10350-1. Other test methods in wide use for, or of particular significance to PP moulding and extrusion materials are also included in this document, as are the designatory properties specified in ISO 19069-1.

  • Standard
    9 pages
    English language
    sale 15% off
  • Standard
    10 pages
    French language
    sale 15% off
ISO
ISO 17855-2:2024(Main)
Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties

This document specifies the methods of preparation of test specimens and the test methods for determining the properties of polyethylene (PE) moulding and extrusion materials. It gives requirements for handling test material and for conditioning both the test material before moulding and the specimens before testing. This document specifies the procedures and conditions for the preparation of test specimens and procedures for measuring properties of the materials from which these specimens are made. Properties and test methods that are suitable and essential to characterize PE moulding and extrusion materials are listed. The properties in this document have been selected from the general test methods in ISO 10350-1. Other test methods in wide use for or of particular significance to PE moulding and extrusion materials are also included in this document, as are the designatory properties specified in ISO 17855-1. Properties of slow crack growth, etc. are specified in documents of polyethylene (PE) materials for piping systems. The methods of preparation and conditioning, the specimen dimensions and the test procedures specified herein are used to obtain reproducible and comparable test results. Values determined will not necessarily be identical to those obtained using specimens of different dimensions or prepared using different procedures.

  • Standard
    9 pages
    English language
    sale 15% off
  • Standard
    9 pages
    French language
    sale 15% off
ISO
ISO 182-3:2023(Main)
Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 3: Conductometric method

This document specifies a method for the determination of the thermal stability at elevated temperature of compounds and products based on vinyl chloride homopolymers and copolymers (in the following text abbreviated as PVC) which undergo dehydrochlorination (the evolution of hydrogen chloride). This document is applicable to the characterization of PVC compounds and products, especially with regard to the effectiveness of their heat-stabilizing systems. It is applicable to coloured PVC compounds and products where a discolouration test under the action of heat may be unsatisfactory. This document is applicable to compounded PVC materials and products. It can be applicable to polymers in powder form under appropriate conditions, to be agreed upon between the interested parties. This document does not apply to PVC compounds in the form of dry blends, since such materials can be not sufficiently homogeneous. This document does not apply to PVC compounds and products which evolve other decomposition products, in addition to hydrogen chloride, at elevated temperatures that can affect the conductivity of water when they are absorbed into it. In this case, a method suitable for the determination of chloride ion (Cl−) in the absorbing solution shall be used (see ISO 182-4[2]). This document can also be applied to other plastics materials which can evolve hydrogen chloride or other hydrogen halides when heated under the conditions prescribed by the relevant specifications, or as agreed upon between the interested parties.

  • Standard
    19 pages
    English language
    sale 15% off
  • Standard
    19 pages
    French language
    sale 15% off
ISO
ISO 4608:2023(Main)
Plastics - Homopolymer and copolymer resins of vinyl chloride for general use - Determination of plasticizer absorption at room temperature

This document specifies a method for determining the plasticizer absorption at room temperature. It is applicable to PVC general-purpose resins and filler resins designated "G" and "F" in ISO 24024-1. This document can be used to determine the quantity of plasticizer absorbed by a resin at room temperature to give a dry mixture.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off
ISO
ISO 2561:2023(Main)
Plastics - Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography

This document specifies a method for the determination of the residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography. It can also be used for the simultaneous determination of other volatile aromatic hydrocarbons in PS and PS-I.

  • Standard
    13 pages
    English language
    sale 15% off