ISO 14960-1:2023

Tubeless tyres — Valves and components — Part 1: Snap-in tyre valves test methods

This document specifies test methods for snap-in tubeless tyre valves intended for, but are not limited to, on-road applications. TPMS valves and high-pressure valves are not included in this document.

Pneumatiques sans chambre — Valves et composants — Partie 1: Méthodes d'essai des valves à boutonner («snap-in») pour pneumatiques

General Information

• Status: Published
• Publication Date: 07-Nov-2023
• ICS: 83.160.01 - Tyres in general
• Technical Committee: ISO/TC 31/SC 9 - Valves for tube and tubeless tyres
• Drafting Committee: ISO/TC 31/SC 9 - Valves for tube and tubeless tyres
• Current Stage: 6060 - International Standard published
• Start Date: 08-Nov-2023
• Due Date: 30-Oct-2023
• Completion Date: 08-Nov-2023

Relations

• Revises: ISO 14960-1:2014 - Tubeless tyres — Valves and components — Part 1: Test methods
• Effective Date: 06-Jun-2022

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 14960-1
Second edition
2023-11
Tubeless tyres — Valves and
components —
Part 1:
Snap-in tyre valves test methods
Pneumatiques sans chambre — Valves et composants —
Partie 1: Méthodes d'essai des valves à boutonner («snap-in») pour
pneumatiques
Reference number
ISO 14960-1:2023(E)
© ISO 2023

---------------------- Page: 1 ----------------------
ISO 14960-1:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
  © ISO 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 14960-1:2023(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Methods for testing tubeless tyres snap-in valves . 2
4.1 General . 2
4.2 Ageing . 2
4.3 Test fixtures . 2
4.4 Installation . 2
5 Test methods and performances requirements . 3
5.1 Adhesion . 3
5.1.1 Test method . 3
5.1.2 Performances . 3
5.2 Valve core seal . 3
5.2.1 Room temperature test . 3
5.2.2 Low temperature test . 4
5.2.3 High temperature test . 4
5.3 Valve cap seal (optional, for sealing caps only) . 4
5.3.1 Test method . 4
5.3.2 Performances .
...

FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 14960-1
ISO/TC 31/SC 9
Tubeless tyres — Valves and
Secretariat: AFNOR
components —
Voting begins on:
2023-08-09
Part 1:
Voting terminates on:
Snap-in tyre valves test methods
2023-10-04
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 14960-1:2023(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS. © ISO 2023

---------------------- Page: 1 ----------------------
ISO/FDIS 14960-1:2023(E)
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 14960-1
ISO/TC 31/SC 9
Tubeless tyres — Valves and
Secretariat: AFNOR
components —
Voting begins on:
Part 1:
Voting terminates on:
Snap-in tyre valves test methods
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
RECIPIENTS OF THIS DRAFT ARE INVITED TO
ISO copyright office
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
CP 401 • Ch. de Blandonnet 8
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
CH-1214 Vernier, Geneva
DOCUMENTATION.
Phone: [phone]
IN ADDITION TO THEIR EVALUATION AS
Reference number
Email: [e-mail]
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 14960-1:2023(E)
Website: www.iso.org
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
Published in Switzerland
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
ii
  © ISO 2023 – All rights reserved
NATIONAL REGULATIONS. © ISO 2023

---------------------- Page: 2 ----------------------
ISO/FDIS 14960-1:2023(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Methods for testing tubeless tyres snap-in valves . 2
4.1 General . 2
4.2 Ageing . 2
4.3 Test fixtures . 2
4.4 Installation . 2
5 Test methods and performances requirements . 3
5.1 Adhesion . 3
5.1.1 Test method . 3
5.1.2 Performances .
...

ISO/FDIS 14960-1
ISO/TC 31/SC 9
Date: 2023-01-30
ISO/DIS 14960-1:2023(E)
ISO/TC 31/SC 9/WG
Secretariat: AFNOR
Tubeless tyres — Valves and components —
Part 1:
Snap-in tyre valves test methods
FDIS stage

---------------------- Page: 1 ----------------------
ISO/DISFDIS 14960-1:20222023(E)
© ISO 20222023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this
publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical,
including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can
be requested from either ISO at the address below or ISO'sISO’s member body in the country of the requester.
ISO Copyright Officecopyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
Email: [e-mail]
E-mail: [e-mail]
Website: www.iso.orgwww.iso.org
Published in Switzerland.
ii © ISO 2022 – All rights reserved
ii © ISO 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/DISFDIS 14960-1:20222023(E)
Contents Page
Foreword . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Methods for testing tubeless tyres snap-in valves . 2
4.1 General . 2
4.2 Ageing . 2
4.3 Test fixtures . 2
4.4 Installation . 3
5 Test methods and performances requirements . 3
5.1 Adhesion . 3
5.1.1 Test method . 3
5.1.2 Performances . 3
5.2 Valve core seal . 3
5.2.1 Room temperature test . 4
5.2.2 Low temperature test . 4
5.2.3 High temperature test . 4
5.3 Valve cap seal (optional, for sealing caps only) . 5
5.3.1 Test method . 5
5.3.2 Performances . 5
5.4 Valve to rim seal . 6
5.4.1 Low temperature . 6
5.4.2 High temperature . 6
5.5 Installation te
...