Intelligent transport systems — Cooperative ITS — Using V2I and I2V communications for applications related to signalized intersections

This document defines the message, data structures, and data elements to support exchanges between the roadside equipment and vehicles to address applications to improve safety, mobility and environmental efficiency. In order to verify that the defined messages will satisfy these applications, a systems engineering process has been employed that traces use cases to requirements and requirements to messages and data concepts. This document consists of a single document that contains the base specification and a series of annexes. The base specification lists the derived information requirements (labelled informative) and references to other standards for message definitions where available. Annex A contains descriptions of the use cases addressed by this document. Annexes B and C contain traceability matrices that relate use cases to requirements and requirements to the message definitions (i.e. data frames and data elements). The next annexes list the base message requirements and application-oriented specific requirements (requirements traceability matrix) that map to the message and data concepts to be implemented. As such, an implementation consists of the base plus an additional group of extensions within this document. Details on information requirements, for other than SPaT, MAP, SSM, and SRM messages are provided in other International Standards. The focus of this document is to specify the details of the SPaT, MAP, SSM, and SRM supporting the use cases defined in this document. Adoption of these messages varies by region and their adoption can occur over a significant time period. This document covers the interface between roadside equipment and vehicles. Applications, their internal algorithms, and the logical distribution of application functionality over any specific system architecture are outside the scope of this document.

Systèmes intelligents de transport — Coopérative ITS — Utilisation de communications V2I et I2V pour des applications relatives aux intersections signalées

General Information

Status
Published
Publication Date
30-May-2019
Current Stage
9092 - International Standard to be revised
Completion Date
19-Jun-2024
Ref Project

Relations

Buy Standard

Technical specification
ISO/TS 19091:2019 - Intelligent transport systems — Cooperative ITS — Using V2I and I2V communications for applications related to signalized intersections Released:31. 05. 2019
English language
233 pages
sale 15% off
Preview
sale 15% off
Preview
Technical specification
ISO/TS 19091:2019 - Intelligent transport systems -- Cooperative ITS -- Using V2I and I2V communications for applications related to signalized intersections
English language
233 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

TECHNICAL ISO/TS
SPECIFICATION 19091
Second edition
2019-06
Intelligent transport systems —
Cooperative ITS — Using V2I and I2V
communications for applications
related to signalized intersections
Systèmes intelligents de transport — Coopérative ITS — Utilisation
de communications V2I et I2V pour des applications relatives aux
intersections signalées
Reference number
ISO/TS 19091:2019(E)
©
ISO 2019

---------------------- Page: 1 ----------------------
ISO/TS 19091:2019(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

---------------------- Page: 2 ----------------------
ISO TS 19091:2019 (E)
Contents Page

Foreword . vi
Introduction . vii
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Abbreviated terms . 10
5 General description (informative). 12
5.1 Overview . 12
5.2 Functional model . 12
5.2.1 Description . 12
5.2.2 Architecture . 14
5.2.3 Message interactions . 16
5.2.4 Common operational assumptions . 16
5.3 Safety use cases . 18
5.3.1 Intent . 18
5.3.2 Additional assumptions . 18
5.3.3 Architecture implications . 18
5.4 Mobility/sustainability use cases . 19
5.4.1 Intent . 19
5.4.2 Additional assumptions . 19
5.4.3 Architecture implications . 19
5.5 Priority/pre-emption use cases . 20
5.5.1 Intent .
...

TECHNICAL ISO/TS
SPECIFICATION 19091
Second edition
2019-06
Intelligent transport systems —
Cooperative ITS — Using V2I and I2V
communications for applications
related to signalized intersections
Systèmes intelligents de transport — Coopérative ITS — Utilisation
de communications V2I et I2V pour des applications relatives aux
intersections signalées
Reference number
ISO/TS 19091:2019(E)
©
ISO 2019

---------------------- Page: 1 ----------------------
ISO/TS 19091:2019(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

---------------------- Page: 2 ----------------------
ISO TS 19091:2019 (E)
Contents Page

Foreword . vi
Introduction . vii
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Abbreviated terms . 10
5 General description (informative). 12
5.1 Overview . 12
5.2 Functional model . 12
5.2.1 Description . 12
5.2.2 Architecture . 14
5.2.3 Message interactions . 16
5.2.4 Common operational assumptions . 16
5.3 Safety use cases . 18
5.3.1 Intent . 18
5.3.2 Additional assumptions . 18
5.3.3 Architecture implications . 18
5.4 Mobility/sustainability use cases . 19
5.4.1 Intent . 19
5.4.2 Additional assumptions . 19
5.4.3 Architecture implications . 19
5.5 Priority/pre-emption use cases . 20
5.5.1 Intent .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.