ISO 15784-2:2015/Amd 1:2020
(Amendment)Intelligent transport systems (ITS) — Data exchange involving roadside modules communication — Part 2: Centre to field device communications using SNMP — Amendment 1: Support for SHA2 encryption
Intelligent transport systems (ITS) — Data exchange involving roadside modules communication — Part 2: Centre to field device communications using SNMP — Amendment 1: Support for SHA2 encryption
Systèmes intelligents de transport (SIT) — Échange de données impliquant la communication de modules en bordure de route — Partie 2: Communications par dispositif du centre au terrain en utilisant le protocole simple de gestion de réseau (SNMP) — Amendement 1
General Information
Relations
Buy Standard
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 15784-2
First edition
2015-11
AMENDMENT 1
2020-02
Intelligent transport systems (ITS) —
Data exchange involving roadside
modules communication —
Part 2:
Centre to field device communications
using SNMP
AMENDMENT 1: Support for SHA2
encryption
Systèmes intelligents de transport (SIT) — Échange de données
impliquant la communication de modules en bordure de route —
Partie 2: Communications par dispositif du centre au terrain en
utilisant le protocole simple de gestion de réseau (SNMP)
AMENDEMENT 1
Reference number
ISO 15784-2:2015/Amd.1:2020(E)
©
ISO 2020
ISO 15784-2:2015/Amd.1:2020(E)
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
ISO 15784-2:2015/Amd.1:2020(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part
...
INTERNATIONAL ISO
STANDARD 15784-2
First edition
2015-11
AMENDMENT 1
2020-02
Intelligent transport systems (ITS) —
Data exchange involving roadside
modules communication —
Part 2:
Centre to field device communications
using SNMP
AMENDMENT 1: Support for SHA2
encryption
Systèmes intelligents de transport (SIT) — Échange de données
impliquant la communication de modules en bordure de route —
Partie 2: Communications par dispositif du centre au terrain en
utilisant le protocole simple de gestion de réseau (SNMP)
AMENDEMENT 1
Reference number
ISO 15784-2:2015/Amd.1:2020(E)
©
ISO 2020
ISO 15784-2:2015/Amd.1:2020(E)
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
ISO 15784-2:2015/Amd.1:2020(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.